[Nut-upsuser] Data string for 2 instant commands to Powerware 9110

[Charles Lepple]

On Feb 10, 2013, at 9:11 AM, Ben Chase wrote:

>  I guess it would be the actual string of an instant command sent down the rs232 port to the ups.

Probably one of these?

   https://github.com/networkupstools/nut/blob/master/drivers/upscode2.c#L406 (middle column, most likely)

Not sure whether your model takes a "\n" or "\r\n" around the command:

   https://github.com/networkupstools/nut/blob/master/drivers/upscode2.c#L1003

Baud rate seems to default to 1200.

Sorry I don't have more detail - I haven't worked on this particular driver.

-- 
Charles Lepple
clepple at gmail