[Nut-upsuser] nut package with Riello UPS support

[Charles Lepple]

On Jul 29, 2013, at 7:56 AM, Charles Lepple wrote:

> On Jul 29, 2013, at 6:43 AM, Pavel Potcheptsov (EKTOS) wrote:
> 
>> Hello list,
>> I have explored https://github.com/networkupstools/nut repository
>> and found that Riello UPS added into list of supported UPS.
>> But current package for most distribution it's nut-2.6.5 which
>> doesn't have Riello's models.
>> Do we need to wait next upcoming nut release to get start with Riello?
> 
> We're not too far away from a release:
> 
> https://github.com/networkupstools/nut/issues/37
> 
>> I tried to install from source but stuck:
> [...]
>> Using existing nut.conf.5 manual page, since 'asciidoc' was not found. 
> 
> We don't check the generated man pages into the Git repository, so the easiest way to get around this is probably to just install asciidoc.
> 
> At some point I will fix the Buildbot step which generates snapshot tarballs with the generated man pages included.


http://buildbot.networkupstools.org/public/nut/waterfall?show=Debian-x64-gcc

http://buildbot.networkupstools.org/~buildbot/cayman/snapshot/ra074844f88ca352780dd881b5fa3c435832d165e-36/nut-2.7.1-pre1.tar.gz

-- 
Charles Lepple
clepple at gmail