[Nut-upsuser] nut package with Riello UPS support
Pavel Potcheptsov (EKTOS)
ppo at ektos.net
Tue Jul 30 14:59:52 UTC 2013
I have downloaded this file and did ./configure --with-user=_ups
and then make command stopped at:
gcc -DHAVE_CONFIG_H -I. -I../include -I../include -I/usr/local/include
-I/usr/local/include/libusb-1.0 -DSHUT_MODE -g -O2 -Wall
-Wsign-compare -MT mge_shut-usbhid-ups.o -MD -MP -MF
.deps/mge_shut-usbhid-ups.Tpo -c -o mge_shut-usbhid-ups.o `test -f
'usbhid-ups.c' || echo './'`usbhid-ups.c
usbhid-ups.c: In function 'hid_ups_walk':
usbhid-ups.c:1272: error: 'EPROTO' undeclared (first use in this function)
usbhid-ups.c:1272: error: (Each undeclared identifier is reported only once
usbhid-ups.c:1272: error: for each function it appears in.)
*** Error 1 in drivers (Makefile:1314 'mge_shut-usbhid-ups.o')
*** Error 1 in /root/nut-2.7.1-pre1 (Makefile:461 'all-recursive')
On Tue, Jul 30, 2013 at 5:00 PM, Charles Lepple <clepple at gmail.com> wrote:
> On Jul 29, 2013, at 7:56 AM, Charles Lepple wrote:
> > On Jul 29, 2013, at 6:43 AM, Pavel Potcheptsov (EKTOS) wrote:
> >> Hello list,
> >> I have explored https://github.com/networkupstools/nut repository
> >> and found that Riello UPS added into list of supported UPS.
> >> But current package for most distribution it's nut-2.6.5 which
> >> doesn't have Riello's models.
> >> Do we need to wait next upcoming nut release to get start with Riello?
> > We're not too far away from a release:
> > https://github.com/networkupstools/nut/issues/37
> >> I tried to install from source but stuck:
> > [...]
> >> Using existing nut.conf.5 manual page, since 'asciidoc' was not found.
> > We don't check the generated man pages into the Git repository, so the
> easiest way to get around this is probably to just install asciidoc.
> > At some point I will fix the Buildbot step which generates snapshot
> tarballs with the generated man pages included.
> Charles Lepple
> clepple at gmail
Best / С наилучшими пожеланиями
1, Academika Proskury
Mobile UA: +38 050 3642391
Home UA: +380 572 931115
ppo at ektos.net
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Nut-upsuser