[Nut-upsuser] nut package with Riello UPS support

[Pavel Potcheptsov (EKTOS)]

Thank you very much!!
I have tried configure downloaded source with
# ./configure --with-user=_ups --with-group=_ups
--with-statepath=/var/db/nut/
and then build driver and copy again. but this doesn't help (driver pid
still in the /var/state/ups).
Maybe I must add more arguments to change driver's pid location, but I did
next, I changed this argument in openbsd ports:
# pkg_delete nut
# cd /usr/ports/sysutils/nut/
edit Makefile and change line
--with-statepath=/var/db/nut
to
--with-statepath=/var/state/ups
# make install
# /etc/rc.d/upsd start
upsd(ok)
# /etc/rc.d/upsmon
start

upsmon(ok)
# upsc senpro at localhost
battery.capacity: 75
battery.charge: 100
battery.runtime: 26280
battery.voltage: 40.8
battery.voltage.nominal: 36
device.mfr: RPS S.p.a.
device.model: UOD1-XL
device.serial:
device.type: ups
driver.name: riello_ser
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/tty00
driver.version: 2.6.5-183-ga074844
driver.version.internal: 0.02
input.bypass.frequency: 50.00
input.bypass.voltage: 216
input.frequency: 50.00
input.voltage: 216
output.frequency: 50.00
output.frequency.nominal: 50.0
output.power.percent: 28
output.voltage: 231
output.voltage.nominal: 230
ups.firmware: SWM035-01-07
ups.load: 28
ups.mfr: RPS S.p.a.
ups.model: UOD1-XL
ups.power.nominal: 1000
ups.realpower.nominal: 800
ups.serial:
ups.status: OL CHRG
ups.temperature: 34

# tail
/var/log/daemon

Jul 31 09:31:48 gw upsd[7687]: mainloop: Interrupted system call
Jul 31 09:31:48 gw upsd[7687]: Signal 15: exiting
Jul 31 09:31:57 gw riello_ser[148]: Signal 15: exiting
Jul 31 10:16:02 gw riello_ser[12770]: Startup successful
Jul 31 10:16:02 gw upsd[31799]: listening on 127.0.0.1 port 3493
Jul 31 10:16:02 gw upsd[31799]: /var/state/ups is world readable
Jul 31 10:16:02 gw upsd[31799]: Connected to UPS [senpro]: riello_ser-senpro
Jul 31 10:16:02 gw upsd[1994]: Startup successful
Jul 31 10:16:39 gw upsmon[32204]: Startup successful
Jul 31 10:16:39 gw upsd[1994]: User ups_ at 127.0.0.1 logged into UPS [senpro]

Does it looks good?
Another question what does riello experimental driver warning mean?
Does it affect shutdown procedure?
Should I install riello driver on Slave computers, which powered from same
UPS or just setup their as usual slave (just upsmon.conf)?

On Tue, Jul 30, 2013 at 6:03 PM, Charles Lepple <clepple at gmail.com> wrote:

> On Jul 30, 2013, at 10:39 AM, Pavel Potcheptsov (EKTOS) wrote:
>
> > Is this a trouble? Driver use path /var/state/ups/  but upsd use path
> /var/db/nut/upsd.pid
>
> Yes, the driver and upsd need to agree on the path to the socket.
>
> From the FreeBSD ports tree:
>
> /usr/ports/sysutils/nut/Makefile:
>
> STATEDIR?=      /var/db/nut
> [...]
> CONFIGURE_ARGS= --sysconfdir=${PREFIX}/etc/nut \
>                 --program-transform-name="" \
>                 --localstatedir=${STATEDIR} \
>                 --datadir=${PREFIX}/etc/nut \
>                 --with-drvpath=${PREFIX}/libexec/nut \
>                 --with-statepath=${STATEDIR} \
>                 --with-altpidpath=${STATEDIR} \
>                 --with-pidpath=${STATEDIR} \
>                 --with-pkgconfig-dir=${PREFIX}/libdata/pkgconfig \
>                 --with-user=${NUT_USER} \
>                 --with-group=${NUT_GROUP} \
>                 --with-dev
>
> I think you need to re-run ./configure in the source tree with the driver,
> using the arguments above. Then 'cd drivers; make clean; make riello_ser'
> and install the new copy of the driver.
>
> --
> Charles Lepple
> clepple at gmail
>
>
>
>


-- 

Best / С наилучшими пожеланиями


 *Pavel Potcheptsov*

   LLC EKTOS-Ukraine

System administrator

   1, Academika Proskury

Mobile UA: +38 050 3642391

Home UA: +380 572 931115

   61070 Kharkiv

   www.ektos.com.ua <http://www.ektos.net/>

E-mail:

ppo at ektos.net


  Skype:      potcheptsov.pavel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20130731/82e2b9ac/attachment-0001.html>