[Nut-upsuser] Configure NUT slaves for D-Link 320 ShareCenter NUT master

Panagiotis Atmatzidis atma at convalesco.org
Sat Sep 26 07:51:40 UTC 2015

I was able to root the NAS using this howto[1] - from a rather sketchy blog, full of clickbaits - and found out the default configuration:

password = 123
upsmon master

password = 123
upsmon slave

I bet these are the defaults for every DNS-3xx series out there. I wonder why they did not put the info on the manual. I’m posting this for the ‘future generations’.. In case anyone else needs to enable this. Now ‘upsmon’ works fine:

Sep 26 10:28:42 galois upsmon[10102]: Signal 15: exiting
Sep 26 10:28:42 galois upsmon[10100]: upsmon parent: read
Sep 26 10:28:42 galois upsmon[14837]: Startup successful
Sep 26 10:28:42 euclid upsd[2372]: User client at logged into UPS [megatec]

Best Regards,

[1] https://nas-tweaks.net/371/hdd-installation-of-the-fun_plug-0-7-on-nas-devices/

Panagiotis (atmosx) Atmatzidis

email:	atma at convalesco.org
URL:	http://www.convalesco.org
GnuPG ID: 0x1A7BFEC5
gpg --keyserver pgp.mit.edu --recv-keys 1A7BFEC5

"Everyone thinks of changing the world, but no one thinks of changing himself.” - Leo Tolstoy

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 832 bytes
Desc: Message signed with OpenPGP using GPGMail
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20150926/e1cb9e70/attachment.sig>

More information about the Nut-upsuser mailing list