[Nut-upsuser] nutdrv_qx - Device not supported

[Tom van Arkel]

Hi

I have the RCT 3KVA Axpert solar hybrid inverter.  It is also known as the
MPP Solar PIP-MS series, the IPS-4000WM and the Voltronic Axpert MKS.  I am
trying to monitor the inverter using NUT on a Raspberry Pi (I have tried
Ubuntu as well with the same results).  I have tried most of the drivers
with no success.  The inverter came with the ViewPower software so I
assumed that my best chance would be with the nutdrv_qx driver since it
states on the driver page “if your UPS came with a software called
Viewpower, chances are high that it works with this driver”.  I have tried
all the protocols but in the end I get the same error “Device not
supported!”.  It does detect the device on VendorID 0665 and ProductID 5161
but I still get the error.  If the device is really not supported then I
will seek another solution but I would really like to use NUT so if I’m
just doing something wrong I would like to fix the problem.  Any advice
would be highly appreciated.  Below is the debug output:



root at raspberrypi:/etc/nut# /lib/nut/nutdrv_qx -a rct -u root -DDDDD

Network UPS Tools - Generic Q* USB/Serial driver 0.06 (2.7.2)

USB communication driver 0.32

   0.000000     debug level is '5'

   0.003394     upsdrv_initups...

   0.004833     Checking device (0665/5161) (001/005)

   0.012346     - VendorID: 0665

   0.012421     - ProductID: 5161

   0.012458     - Manufacturer: unknown

   0.012492     - Product: unknown

   0.012525     - Serial Number: unknown

   0.012558     - Bus: 001

   0.012589     Trying to match device

   0.012631     Device matches

   0.014418     send_to_all: SETINFO ups.vendorid "0665"

   0.014498     send_to_all: SETINFO ups.productid "5161"

   0.016598     send: QGS

   0.066738     read: (NAKss

   0.067218     qx_process_answer: short reply (input.voltage)

   0.069610     send: QGS

   0.122744     read: (NAKss

   0.123221     qx_process_answer: short reply (input.voltage)

   0.125613     send: QGS

   0.178743     read: (NAKss

   0.179162     qx_process_answer: short reply (input.voltage)

   0.181615     send: M

   0.226746     read: (NAKss

   0.227193     voltronic_qs_protocol: invalid protocol [(NAKss]

   0.227609     ups_infoval_set: failed to preprocess value
[ups.firmware.aux: (NAKss]

   0.231126     send: M

   0.274751     read: (NAKss

   0.275170     voltronic_qs_protocol: invalid protocol [(NAKss]

   0.275566     ups_infoval_set: failed to preprocess value
[ups.firmware.aux: (NAKss]

   0.277877     send: M

   0.322756     read: (NAKss

   0.323169     voltronic_qs_protocol: invalid protocol [(NAKss]

   0.323569     ups_infoval_set: failed to preprocess value
[ups.firmware.aux: (NAKss]

   0.325886     send: QS

   0.370762     read: (NAKss

   0.371214     qx_process_answer: short reply (input.voltage)

   0.374892     send: QS

   0.426772     read: (NAKss

   0.427194     qx_process_answer: short reply (input.voltage)

   0.434279     send: QS

   0.482791     read: (NAKss

   0.483268     qx_process_answer: short reply (input.voltage)

   0.485659     send: D

   0.530790     read: (NAKss

   0.531248     qx_process_answer: short reply (input.voltage)

   0.534912     send: D

   0.578790     read: (NAKss

   0.579191     qx_process_answer: short reply (input.voltage)

   0.581664     send: D

   0.626770     read: (NAKss

   0.627177     qx_process_answer: short reply (input.voltage)

   0.630672     send: Q1

   0.682802     read: (NAKss

   0.683255     qx_process_answer: short reply (input.voltage)

   0.685680     send: Q1

   0.730812     read: (NAKss

   0.731233     qx_process_answer: short reply (input.voltage)

   0.733682     send: Q1

   0.786810     read: (NAKss

   0.787208     qx_process_answer: short reply (input.voltage)

   0.789694     send: Q1

   0.834823     read: (NAKss

   0.835250     qx_process_answer: short reply (input.voltage)

   0.837695     send: Q1

   0.882822     read: (NAKss

   0.883218     qx_process_answer: short reply (input.voltage)

   0.885699     send: Q1

   0.930818     read: (NAKss

   0.931262     qx_process_answer: short reply (input.voltage)

   0.933710     send: Q1

   0.978823     read: (NAKss

   0.979279     qx_process_answer: short reply (input.voltage)

   0.981715     send: Q1

   1.026846     read: (NAKss

   1.027311     qx_process_answer: short reply (input.voltage)

   1.030973     send: Q1

   1.082849     read: (NAKss

   1.083257     qx_process_answer: short reply (input.voltage)

   1.085726     send: Q1

   1.130861     read: (NAKss

   1.131302     qx_process_answer: short reply (input.voltage)

   1.133734     send: Q1

   1.178834     read: (NAKss

   1.179238     qx_process_answer: short reply (input.voltage)

   1.182739     send: Q1

   1.226864     read: (NAKss

   1.227275     qx_process_answer: short reply (input.voltage)

   1.227679     Device not supported!

   1.228063     Device not supported!



Thanks in advance

Tom
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20160213/8a6a9f48/attachment-0001.html>