[Nut-upsuser] [HCL] Powerware PW5125 with driver bcmxcp

[Mike]

This UPS is already listed in the compatibility list.   But I wanted to
add the instant commands supported by upscmd:

============================

Instant commands supported on UPS [PW5125]:

beeper.disable - Disable the UPS beeper
beeper.enable - Enable the UPS beeper
beeper.mute - Temporarily mute the UPS beeper
load.on - Turn on the load immediately
outlet.1.load.off - Turn off the load on outlet 1 immediately
outlet.1.load.on - Turn on the load on outlet 1 immediately
outlet.1.shutdown.return - Turn off the outlet 1 and return when power
is back
outlet.2.load.off - Turn off the load on outlet 2 immediately
outlet.2.load.on - Turn on the load on outlet 2 immediately
outlet.2.shutdown.return - Turn off the outlet 2 and return when power
is back
shutdown.return - Turn off the load and return when power is back
shutdown.stayoff - Turn off the load and remain off
test.battery.start - Start a battery test

============================

and note that a delayed shutoff command is not available.

(NUT 2.7.4 on OpenBSD 6.0)

imo, it would be useful if this info were submitted along with the other
info when an HCL entry is submitted.