[Nut-upsuser] Help with Elite 800VA usb UPS

[Andrea de Lutti]

Thanks a lot, I will do it and keep you informed.
Best regards

Andrea

2017-06-12 12:34 GMT+02:00 Manuel Wolfshant <wolfy at nobugconsulting.ro>:

> On 06/12/2017 12:56 PM, Andrea de Lutti wrote:
>
>
>
>> > I have also successfully tested the battery...
>> >
>> >  upscmd -uadmin -pups Elit at artu test.battery.start.quick
>>
>> I would also recommend testing the shutdown procedure and making sure
>> that everything works as expected on power failures.
>> Please, let us know the results of these tests, so that we can add a
>> more informed report about your device to our library
>> (http://networkupstools.org/ddl/).
>>
>
> ​Nice, I would like to test it, but if I don't have battery runtime value
> and / or battery charge, how may I test it correctly?
> I have seen also some strange values for battery.voltage.high and
> battery.voltage.low....are they correct?
>
> run with a test load   ( at least twice, for 50% and 100% load for
> instance ) and write down the periods between full charge and shutdown.
> Then you can use runtimecal in ups.conf to obtain guestimations during
> normal usage
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20170612/a5e339dd/attachment.html>