[Nut-upsuser] Raspberry PI 3B+ with Ubuntu Mate and NUT

[Vladimir Zaitchikov]

I installed the NUT under the latest Ubuntu Mate for Raspberry. The 
driver immediately earned with my UPS (Powercom SPD-850U). But my 
happiness was not long. After the first restart of Raspberry, the NUT 
did not start. It is treated by reconnecting the USB connector. 
Reconnection has to be performed after each reboot of Raspberry.

The USB permissions for the "nut" group and priority 62 
(62-nut-usbups.rules) are set correctly. NUT works without problems with 
this UPS on the desktop Debian.

v at v-desktop:~/Рабочий стол$ lsusb
Bus 001 Device 004: ID 0d9f:0004 Powercom Co., Ltd
Bus 001 Device 005: ID 0424:7800 Standard Microsystems Corp.
Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

v at v-desktop:~/Рабочий стол$ sudo /lib/nut/usbhid-ups -DD -a spider
Network UPS Tools - Generic HID driver 0.41 (2.7.4)
USB communication driver 0.33
    0.000000    debug level is '2'
    0.002016    upsdrv_initups...
.......
    0.002883    Checking device (0D9F/0004) (001/004)   0.004499    - 
VendorID: 0d9f
    0.004538    - ProductID: 0004
    0.004566    - Manufacturer: unknown
    0.004585    - Product: unknown
    0.004604    - Serial Number: unknown
    0.004622    - Bus: 001
    0.004641    - Device release number: 0002
    0.004660    Trying to match device
    0.004690    Device matches
    0.005416    Unable to get HID descriptor (error sending control 
message: Broken pipe)
    0.005553    HID descriptor length 996
    0.007546    Unable to get Report descriptor: Broken pipe
-

С уважением
Зайчиков В А

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20190514/9f40d9ea/attachment.html>