[Nut-upsuser] Problems with NUT on Raspberry Pi

EP el.popans at t-online.de
Sat Oct 26 11:52:54 BST 2019



I installed NUT on raspberry pi as a NUT-Server. It works fine so far with a
Cyberpower OR600ELCDRM1U (used driver: usbhid-ups). The Pi recognizes power
loss and shuts down itself and the ups as it should.


Problem: The UPS comes up immediately after shutting down. This is a big
issue because there is no power, the server (NUT-Slave) begins powering up
and the battery will drain within one minute. 

The UPS should stay off until power comes back on line. Can you help me with


Thanks a lot!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20191026/a0305bbe/attachment.html>

More information about the Nut-upsuser mailing list