[Nut-upsuser] Problems with NUT on Raspberry Pi

EP el.popans at t-online.de
Sun Oct 27 10:14:14 GMT 2019


Hhm. OK, but it doesn't work. The ups goes offline and starts back immediately. Even if ups.delay.start is set 0. I will try another test circuit after using the upsrw command. 


-----Urspr√ľngliche Nachricht-----
Von: Nut-upsuser Im Auftrag von Roger Price
Gesendet: Sonntag, 27. Oktober 2019 11:11
An: Nut-upsuser at alioth-lists.debian.net
Betreff: Re: [Nut-upsuser] Problems with NUT on Raspberry Pi

On Sun, 27 Oct 2019, EP wrote:

> it was set by ups.conf. Should I use the upsr-command?

Setting the value in ups.conf is correct, since that is the value which will be used the next time upsd starts.

Roger

_______________________________________________
Nut-upsuser mailing list
Nut-upsuser at alioth-lists.debian.net
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser




More information about the Nut-upsuser mailing list