[Nut-upsuser] Problems with NUT on Raspberry Pi

[EP]

I checked it with the Windows machine. There are nearly no parameters to set directly to the ups. The only thing to set is the low battery-state. All other settings seem to run on the windows machine only. 
Ups.delay.start was set to 30 after Windows-configuration. The rest seems to be unattended: 

Init SSL without certificate database
battery.charge: 64
battery.charge.low: 10
battery.charge.warning: 20
battery.mfr.date: CPS
battery.runtime: 960
battery.runtime.low: 300
battery.type: PbAcid
battery.voltage: 13.4
battery.voltage.nominal: 12
device.mfr: CPS
device.model: OR600ELCDRM1U
device.type: ups
driver.name: usbhid-ups
driver.parameter.ondelay: -1
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 10
driver.parameter.port: auto
driver.parameter.synchronous: no
driver.version: 2.7.4
driver.version.data: CyberPower HID 0.4
driver.version.internal: 0.41
input.transfer.high: 263
input.transfer.low: 160
input.voltage: 233.0
input.voltage.nominal: 230
output.voltage: 233.0
ups.beeper.status: enabled
ups.delay.shutdown: 20
ups.delay.start: 30
ups.load: 40
ups.mfr: CPS
ups.model: OR600ELCDRM1U
ups.productid: 0601
ups.realpower.nominal: 360
ups.status: OL CHRG
ups.test.result: Done and passed
ups.timer.shutdown: -60
ups.timer.start: -60
ups.vendorid: 0764

Any suggestions? I can't believe I am the only guy using this unit and facing these problems. 


-----Ursprüngliche Nachricht-----
Von: Nut-upsuser Im Auftrag von Roger Price
Gesendet: Sonntag, 27. Oktober 2019 11:56
An: Nut-upsuser at alioth-lists.debian.net
Betreff: Re: [Nut-upsuser] Problems with NUT on Raspberry Pi

On Sun, 27 Oct 2019, EP wrote:

> I can't imagine that's the way cyberpower wants their unit to work. 
> With this behavior the unit does exactly the opposite of what it is 
> built for. It doesn't protect your equipment. It will destroy it 
> because the server which was just shutted down cleanly will boot again 
> on a battery-powererd ups. What a crap.
>
> But I am not finished at all because I can't believe there is no 
> solution for this problem.

Perhaps it's time to borrow a Windows PC and try the software that comes with 
the UPS.   Roger

_______________________________________________
Nut-upsuser mailing list
Nut-upsuser at alioth-lists.debian.net
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser