[Nut-upsuser] UPS not recognized
dragos_leahu at yahoo.com
Tue Oct 29 10:26:53 GMT 2019
Anyone, any idea?
On Friday, September 27, 2019, 04:19:34 PM GMT+3, Dragos Leahu <dragos_leahu at yahoo.com> wrote:
Replaced UPS Kstar Micropower Micro 1200 (managed via blazer_usb) with https://www.njoy.ro/UPS/horus-plus-2000. The latter doesn't seem to be supported.
1. I tried blazer_usb and usbhid-ups. Any other suggestions? 2. What would be needed to get it supported by NUT?
======== HW ========
HP Microserver Gen 8
======== UPS ========
Working:Kstar Micropower Micro 1200http://www.kstar.com/Line%20Interactive%20UPS%20OEM/10189.jhtml
Not working:nJoy Horus Plus 2000https://www.njoy.ro/UPS/horus-plus-2000
*** Cable/UPS physically detected:
root at omv:~# lsusb
Bus 001 Device 005: ID 0665:5161 Cypress Semiconductor USB to Serial
*** Tried different USB ports on the server to no avail. Cable still visible, UPS not.
*** Connected UPS with same usb cable to Windows laptop with ViewPower software installed and it was detected and I was able to manage it.
======= NUT ========ii nut-client 2.7.4-5 amd64 network UPS tools - clientsii nut-server 2.7.4-5 amd64 network UPS tools - core system
======= OS ========No LSB modules are available.Distributor ID: DebianDescription: Debian GNU/Linux 9.11 (stretch)Release: 9.11Codename: stretch
========== Error =========root at omv:~# systemctl status nut-driver.service● nut-driver.service - Network UPS Tools - power device driver controller Loaded: loaded (/lib/systemd/system/nut-driver.service; static; vendor preset: enabled) Active: failed (Result: exit-code) since Fri 2019-09-27 15:07:49 EEST; 4min 26s ago Process: 6518 ExecStart=/sbin/upsdrvctl start (code=exited, status=1/FAILURE)
Sep 27 15:07:47 omv systemd: nut-driver.service: Failed to enqueue stop job, ignoring: Transaction is destructive.Sep 27 15:07:47 omv systemd: Starting Network UPS Tools - power device driver controller...Sep 27 15:07:49 omv upsdrvctl: No supported UPS detectedSep 27 15:07:49 omv upsdrvctl: Network UPS Tools - Megatec/Q1 protocol USB driver 0.12 (2.7.4)Sep 27 15:07:49 omv upsdrvctl: Driver failed to start (exit status=1)Sep 27 15:07:49 omv upsdrvctl: Network UPS Tools - UPS driver controller 2.7.4Sep 27 15:07:49 omv systemd: nut-driver.service: Control process exited, code=exited status=1Sep 27 15:07:49 omv systemd: Failed to start Network UPS Tools - power device driver controller.Sep 27 15:07:49 omv systemd: nut-driver.service: Unit entered failed state.Sep 27 15:07:49 omv systemd: nut-driver.service: Failed with result 'exit-code'.
========= NUT conf ============root at omv:~# cat /etc/nut/ups.conf[ups]port = autodriver = blazer_usb
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Nut-upsuser