[Nut-upsuser] Device recommendation Salicru

Bartosz bartoszmail at gmail.com
Mon Aug 17 22:41:54 BST 2020

I would also be very interested in this topic.

Best Regards,

pon., 17 sie 2020, 12:55 u┼╝ytkownik Marc Franquesa <marc.franquesa at gmail.com>

> Sorry, because this is not a technical question rather than a Hardware
> advice/recommendation.
> I have been using NUT-UPS perfectly for more than 7 years using two
> different Eaton/MGE models.
> After a battery replacement (replaced 1 year ago) after 5 years of
> service, my current unit seems to behave faulty, as just after 1-2 minutes
> of power outage, shows the LB battery flag and sets FSD although having
> enough battery charge and runtime.
> I'm now looking to replace the UPS, but after comparing various vendors
> and models (and check against the HCL) I found that the Eaton ones are
> quite more expensive than other vendors/models.
> I'm thinking to move to a cheaper model, but still have a good device/NUT
> support, mainly usb-hid or blazer-usb drivers.
> For one side I'm happy with Eaton, however they are quite expensive, and
> although in the past supported NUT development I'm not sure if this is
> still the same collaborative support.
> On the other hand I'm looking to get a Salicru SPS, I've read some good
> (and also some bad) reviews of the devices but would like to know of any
> NUT-user experience.
> So could anyone with experience regarding Salicru/blazer-ups with NUT ?
> Should I give them a try or better stick with Eaton as well supported and
> good device?
> Thanks
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at alioth-lists.debian.net
> https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20200817/913ad1d8/attachment.html>

More information about the Nut-upsuser mailing list