[Nut-upsuser] [EXTERNAL] Re: Device recommendation Salicru
David_Zomaya at tripplite.com
Mon Aug 17 23:18:32 BST 2020
Obviously, I'm biased so don't count my vote, but let me know if you're interested in chatting about Tripp Lite. I try to help out on the mailing list when I can.
More on topic, these are the threads on the mailing list I found with Salicru and NUT (both older posts):
From: Nut-upsuser <nut-upsuser-bounces+david_zomaya=tripplite.com at alioth-lists.debian.net> on behalf of Bartosz <bartoszmail at gmail.com>
Sent: Monday, August 17, 2020 4:41:54 PM
To: Marc Franquesa
Cc: nut-upsuser at alioth-lists.debian.net
Subject: [EXTERNAL] Re: [Nut-upsuser] Device recommendation Salicru
This is an EXTERNAL email. Please take a moment and think before clicking any links or opening any attachments from this email. If suspicious, please forward to ishelpdesk at tripplite.com for review.
I would also be very interested in this topic.
pon., 17 sie 2020, 12:55 użytkownik Marc Franquesa <marc.franquesa at gmail.com<mailto:marc.franquesa at gmail.com>> napisał:
Sorry, because this is not a technical question rather than a Hardware advice/recommendation.
I have been using NUT-UPS perfectly for more than 7 years using two different Eaton/MGE models.
After a battery replacement (replaced 1 year ago) after 5 years of service, my current unit seems to behave faulty, as just after 1-2 minutes of power outage, shows the LB battery flag and sets FSD although having enough battery charge and runtime.
I'm now looking to replace the UPS, but after comparing various vendors and models (and check against the HCL) I found that the Eaton ones are quite more expensive than other vendors/models.
I'm thinking to move to a cheaper model, but still have a good device/NUT support, mainly usb-hid or blazer-usb drivers.
For one side I'm happy with Eaton, however they are quite expensive, and although in the past supported NUT development I'm not sure if this is still the same collaborative support.
On the other hand I'm looking to get a Salicru SPS, I've read some good (and also some bad) reviews of the devices but would like to know of any NUT-user experience.
So could anyone with experience regarding Salicru/blazer-ups with NUT ?
Should I give them a try or better stick with Eaton as well supported and good device?
Nut-upsuser mailing list
Nut-upsuser at alioth-lists.debian.net<mailto:Nut-upsuser at alioth-lists.debian.net>
This message is for the addressee's use only. It may contain confidential information. If you receive this message in error, please delete it and notify the sender. Tripp Lite disclaims all warranties and liabilities, and assumes no responsibility for viruses which may infect an email sent to you from Tripp Lite and which damage your electronic systems or information. It is your responsibility to maintain virus detection systems to prevent damage to your electronic systems and information.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Nut-upsuser