[Nut-upsuser] Device recommendation Salicru

Tim Dawson tadawson at tpcsvc.com
Mon Aug 17 23:20:00 BST 2020

My experience on situations like this is that it is almost always a bad 
battery.  Once load is removed, the voltage bounced back, and thus you 
show time/capacity, but it's possible that the sag under load drops you 
into LB, and causes the shutdown.

If the UPS has a battery test, give it a try, or load test the battery 
external to the UPS if you can - I suspect that the UPS will be fine, 
and the battery degraded.

- Tim

On 08/17/2020 04:41 PM, Bartosz wrote:
> I would also be very interested in this topic.
> Best Regards,
> Bart
> pon., 17 sie 2020, 12:55 użytkownik Marc Franquesa 
> <marc.franquesa at gmail.com <mailto:marc.franquesa at gmail.com>> napisał:
>     Sorry, because this is not a technical question rather than a
>     Hardware advice/recommendation.
>     I have been using NUT-UPS perfectly for more than 7 years using
>     two different Eaton/MGE models.
>     After a battery replacement (replaced 1 year ago) after 5 years of
>     service, my current unit seems to behave faulty, as just after 1-2
>     minutes of power outage, shows the LB battery flag and sets FSD
>     although having enough battery charge and runtime.
>     I'm now looking to replace the UPS, but after comparing various
>     vendors and models (and check against the HCL) I found that the
>     Eaton ones are quite more expensive than other vendors/models.
>     I'm thinking to move to a cheaper model, but still have a good
>     device/NUT support, mainly usb-hid or blazer-usb drivers.
>     For one side I'm happy with Eaton, however they are quite
>     expensive, and although in the past supported NUT development I'm
>     not sure if this is still the same collaborative support.
>     On the other hand I'm looking to get a Salicru SPS, I've read some
>     good (and also some bad) reviews of the devices but would like to
>     know of any NUT-user experience.
>     So could anyone with experience regarding Salicru/blazer-ups with
>     NUT ?
>     Should I give them a try or better stick with Eaton as well
>     supported and good device?
>     Thanks
>     _______________________________________________
>     Nut-upsuser mailing list
>     Nut-upsuser at alioth-lists.debian.net
>     <mailto:Nut-upsuser at alioth-lists.debian.net>
>     https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at alioth-lists.debian.net
> https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser

Tim Dawson


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20200817/bdf35b2f/attachment.html>

More information about the Nut-upsuser mailing list