[Nut-upsuser] nut on armhf, r-pi4b IOW

Roger Price roger at rogerprice.org
Wed Jan 8 14:37:10 GMT 2020


On Tue, 7 Jan 2020, Gene Heskett wrote:

> ‚óŹ nut-monitor.service - Network UPS Tools - power device monitor and 
> shutdown controller
>   Loaded: loaded (/lib/systemd/system/nut-monitor.service; enabled; 
> vendor preset: enabled)
>   Active: failed (Result: protocol) since Tue 2020-01-07 07:19:19 EST; 
> 116ms ago
>  Process: 32343 ExecStart=/sbin/upsmon (code=exited, status=0/SUCCESS)
>
> Jan 07 07:19:19 rpi4 systemd[1]: Starting Network UPS Tools - power 
> device monitor and shutdown controller...
> Jan 07 07:19:19 rpi4 upsmon[32343]: upsmon disabled, please adjust the 
> configuration to your needs
> Jan 07 07:19:19 rpi4 upsmon[32343]: Then set MODE to a suitable value 
> in /etc/nut/nut.conf to enable it

> So, is there enough help in the man pages?, or do you see any 
> showstoppers in the above trace?

The configuration file nut.conf is supplied with the declaration MODE=none which 
is a built-in showstopper.  The user is expected to change this to show that NUT 
has been configured.  There are more details in man nut.conf.

Roger


More information about the Nut-upsuser mailing list