[Nut-upsuser] [POSSIBLE FRAUD] Re: [EXTERNAL] Re: Help with Tripp Lite Internet600U

Thu May 21 01:23:06 BST 2020

David,

Thanks again for your help today.  You're amazing.

If the folks on the list could chime in - thoughts about what I could try next?

May 20 19:57:28 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale

pi at elmer:/home/macbackup $ lsusb

Bus 002 Device 006: ID 0bc2:3343 Seagate RSS LLC

Bus 002 Device 005: ID 0bc2:3343 Seagate RSS LLC

Bus 002 Device 004: ID 0bc2:ab38 Seagate RSS LLC Backup Plus Hub

Bus 002 Device 003: ID 0bc2:ab45 Seagate RSS LLC

Bus 002 Device 002: ID 045b:0210 Hitachi, Ltd

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

Bus 001 Device 011: ID 09ae:3024 Tripp Lite

Bus 001 Device 007: ID 0bc2:331a Seagate RSS LLC

Bus 001 Device 005: ID 0bc2:ab44 Seagate RSS LLC

Bus 001 Device 003: ID 045b:0209 Hitachi, Ltd

Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

pi at elmer:/home/macbackup $ sudo systemctl restart nut-driver

This triggered the following in the log

>From the log:

May 20 20:20:53 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale

May 20 20:20:57 elmer systemd[1]: Stopping Network UPS Tools - power device driver controller...

May 20 20:20:57 elmer upsdrvctl[5561]: Network UPS Tools - UPS driver controller 2.7.4

May 20 20:20:57 elmer usbhid-ups[3813]: Parse error on sock: Invalid ctx buffer

May 20 20:20:57 elmer usbhid-ups[3813]: Signal 15: exiting

May 20 20:20:57 elmer upsd[3815]: Can't connect to UPS [tripplite] (usbhid-ups-tripplite): Connection refused

May 20 20:20:57 elmer systemd[1]: nut-driver.service: Succeeded.

May 20 20:20:57 elmer systemd[1]: Stopped Network UPS Tools - power device driver controller.

May 20 20:20:57 elmer systemd[1]: Starting Network UPS Tools - power device driver controller...

May 20 20:20:58 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Driver not connected

May 20 20:21:02 elmer upsdrvctl[5562]: Network UPS Tools - Generic HID driver 0.41 (2.7.4)

May 20 20:21:02 elmer upsdrvctl[5562]: USB communication driver 0.33

May 20 20:21:02 elmer upsdrvctl[5562]: No matching HID UPS found

May 20 20:21:02 elmer upsdrvctl[5562]: Driver failed to start (exit status=1)

May 20 20:21:03 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Driver not connected

May 20 20:21:08 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Driver not connected

May 20 20:21:08 elmer upsdrvctl[5562]: Using subdriver: TrippLite HID 0.82

May 20 20:21:08 elmer upsdrvctl[5562]: Network UPS Tools - Generic HID driver 0.41 (2.7.4)

May 20 20:21:08 elmer upsdrvctl[5562]: USB communication driver 0.33

May 20 20:21:08 elmer upsdrvctl[5562]: Network UPS Tools - UPS driver controller 2.7.4

May 20 20:21:08 elmer usbhid-ups[5566]: Startup successful

May 20 20:21:08 elmer systemd[1]: Started Network UPS Tools - power device driver controller.

May 20 20:21:10 elmer upsd[3815]: Connected to UPS [tripplite]: usbhid-ups-tripplite

May 20 20:21:13 elmer upsmon[3828]: Communications with UPS tripplite at localhost established

---- On Wed, 20 May 2020 20:03:06 -0400 David Zomaya <David_Zomaya at tripplite.com> wrote ----

No, it's not.

I'd defer to the list for tips on that one.

First thing I'd try if no one else has ideas is checking lsusb and restarting the service.

Thank you,

David Zomaya

Tripp Litehttp://www.tripplite.com/  

From: Tom Cooper <mailto:tom at cooperfamily.xyz>
 Sent: Wednesday, May 20, 2020 7:00 PM
 To: David Zomaya
 Cc: nut-upsuser
 Subject: Re: [POSSIBLE FRAUD] Re: [Nut-upsuser] [EXTERNAL] Re: Help with Tripp Lite Internet600U  

I'm not seeing this in the log.  I'm guessing that's not great.

May 20 19:57:28 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale

May 20 19:57:33 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale

May 20 19:57:38 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale

May 20 19:57:43 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale

May 20 19:57:48 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale

May 20 19:57:53 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale

May 20 19:57:58 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale

May 20 19:58:03 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale

May 20 19:58:08 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale

May 20 19:58:13 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale

May 20 19:58:18 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale

May 20 19:58:23 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale

May 20 19:58:28 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale

May 20 19:58:33 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale

May 20 19:58:38 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale

May 20 19:58:43 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale

May 20 19:58:48 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale

May 20 19:58:53 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale

May 20 19:58:58 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale

May 20 19:59:03 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale

---- On Wed, 20 May 2020 19:49:27 -0400 David Zomaya <mailto:David_Zomaya at tripplite.com> wrote ----

Glad to hear it's working, thanks Tom.

Network UPS Tools team: is fixing this as simple as me telling you what new UPS protocols are HID-PDC compliant? 

Thank you,

David Zomaya

Tripp Litehttp://www.tripplite.com/  

From: Tom Cooper <mailto:tom at cooperfamily.xyz>
 Sent: Wednesday, May 20, 2020 2:42 PM
 To: David Zomaya
 Cc: nut-upsuser
 Subject: Re: [POSSIBLE FRAUD] Re: [Nut-upsuser] [EXTERNAL] Re: Help with Tripp Lite Internet600U  

The fix:

Was following a howto here: https://urldefense.proofpoint.com/v2/url?u=https-3A__raymondjdouglas.com_blog_2018_ups-2Dmonitoring_&d=DwMFaQ&c=f9s1WCuF-N6cmD_YaZ7gBg&r=lhr3k4au5dVQgHY_iS-v_t9g8PHVkn8Px_wyaupZGfQ&m=xxqnPehnxbPZyMn7Y4l3qE4tQqpQ88lYY6CCnQ2qVrU&s=nbzYFun_NHdb-5EB7VMlWNFsqwWbA2-VLKNlBKWFVUQ&e=

Much thanks to David
 Zomaya for coming up with the recipe!

Nut.conf:

Just have 

MODE=standalone

UPS.conf

[tripplite]

     driver = usbhid-ups

     port = auto

     productid=3024

     desc = "Tripp Lite Internet600U"

upsd.conf

 LISTEN 127.0.0.1 3493

 LISTEN ::1 3493

[tripplite]

     driver = usbhid-ups

     port = auto

Create a new udev ruleset:

cat /etc/udev/rules.d/90-nut-ups.rules

Put this rule in place

# /etc/udev/rules.d/90-nut-ups.rules

ACTION=="add", \

SUBSYSTEM=="usb", \

ATTR{idVendor}=="09ae", ATTR{idProduct}=="3024", \

MODE="0660", GROUP="nut"

Reload the udev rules 

udevadm control --reload-rules && udevadm trigger

(and maybe unplug/replug the UPS)

Then 

sudo systemctl start nut-driver

Loads the driver, and following the rest of the steps ih the howto I see this output from upsc

pi at elmer:/home/macbackup $ upsc tripplite

Init SSL without certificate database

battery.charge: 100

battery.charge.warning: 30

battery.runtime: 1753

battery.type: PbAC

battery.voltage: 0.0

battery.voltage.nominal: 12.0

device.mfr: Tripp Lite

device.model: INTERNET600U

device.serial: 2922BVLBC87B601706

device.type: ups

driver.name: usbhid-ups

driver.parameter.pollfreq: 30

driver.parameter.pollinterval: 2

driver.parameter.port: auto

driver.parameter.productid: 3024

driver.parameter.synchronous: no

driver.version: 2.7.4

driver.version.data: TrippLite HID 0.82

driver.version.internal: 0.41

input.frequency: 6020.0

input.transfer.high: 145.0

input.transfer.low: 95.0

input.voltage: 0.0

input.voltage.nominal: 120

output.current: 50.0

output.frequency: 6020.0

output.frequency.nominal: 60

output.voltage: 0.0

output.voltage.nominal: 120

ups.beeper.status: muted

ups.delay.shutdown: 20

ups.delay.start: 30

ups.load: 11

ups.mfr: Tripp Lite

ups.model: INTERNET600U

ups.power: 37.0

ups.power.nominal: 600

ups.productid: 3024

ups.serial: 2922BVLBC87B601706

ups.status: OL

ups.timer.reboot: 65535

ups.timer.shutdown: 65535

ups.timer.start: 65535

ups.vendorid: 09ae

ups.watchdog.status: 0

---- On Wed, 20 May 2020 14:56:14 -0400 David Zomaya <mailto:David_Zomaya at tripplite.com> wrote ----

This message is for the addressee's use only. It may contain confidential information. If you receive this message in error, please delete it and notify the sender. Tripp Lite disclaims all warranties and liabilities,
 and assumes no responsibility for viruses which may infect an email sent to you from Tripp Lite and which damage your electronic systems or information. It is your responsibility to maintain virus detection systems to prevent damage to your electronic systems
 and information.
"Can't claim USB device [09ae:3024]: could not detach kernel driver from interface 0: Operation
 not permitted"

Is probably an issue with NUT grabbing the UPS... can you disconnect and reconnect the USB cable and try again?

If that fails, maybe a udev rule will help.

Thank you,

David Zomaya
Tripp Lite

http://www.tripplite.com/ 

From: Tom Cooper <mailto:tom at cooperfamily.xyz>
 Sent: Wednesday, May 20, 2020 1:54:20 PM
 To: David Zomaya
 Cc: nut-upsuser
 Subject: Re: [POSSIBLE FRAUD] Re: [Nut-upsuser] [EXTERNAL] Re: Help with Tripp Lite Internet600U  

David,

I appreciate the quick feedback!

If I didn't fat finger any of the parameters you sent me, it's still not working.

Here's the output from the attempt to start.  (BTW - nothing appears in the daemon.log when I use the upsdrvctl command.)

pi at elmer:/home/macbackup $ sudo vi /etc/nut/nut.conf

pi at elmer:/home/macbackup $ sudo vi /etc/nut/ups.conf

pi at elmer:/home/macbackup $ sudo vi /etc/nut/upsd.conf

pi at elmer:/home/macbackup $ sudo upsdrvctl start

Network UPS Tools - UPS driver controller 2.7.4

Network UPS Tools - Generic HID driver 0.41 (2.7.4)

USB communication driver 0.33

Can't claim USB device [09ae:3024]: could not detach kernel driver from interface 0: Operation not permitted

Driver failed to start (exit status=1)

Network UPS Tools - Generic HID driver 0.41 (2.7.4)

USB communication driver 0.33

Can't claim USB device [09ae:3024]: could not detach kernel driver from interface 0: Operation not permitted

Driver failed to start (exit status=1)

Network UPS Tools - Generic HID driver 0.41 (2.7.4)

USB communication driver 0.33

Can't claim USB device [09ae:3024]: could not detach kernel driver from interface 0: Operation not permitted

Driver failed to start (exit status=1)

---- On Wed, 20 May 2020 14:03:09 -0400 David Zomaya <mailto:David_Zomaya at tripplite.com> wrote ----

My thoughts for a test:

Just have MODE=standalone
 in nut.conf

Put 
 [tripplite]

     driver = usbhid-ups

     port = auto

     productid=3024

     desc = "Tripp Lite Internet600U"

In ups.conf
Put 
  LISTEN 127.0.0.1 3493
  LISTEN ::1 3493

[tripplite]
      driver = usbhid-ups

     port = auto
in upsd.conf

That may be suboptimal but will probably work for a test.

Side note: I use "upsdrvctl start/stop" to start and stop the driver. 

Thank you,

David Zomaya

Tripp Lite

From: Tom Cooper <mailto:tom at cooperfamily.xyz>
 Sent: Wednesday, May 20, 2020 12:55 PM
 To: David Zomaya
 Cc: nut-upsuser
 Subject: Re: [POSSIBLE FRAUD] Re: [Nut-upsuser] [EXTERNAL] Re: Help with Tripp Lite Internet600U  

David,

That's exciting - but I am not seeing similar results.  

I *must* be doing something dumb - but I can't see it.

I've got nut-2.7.4-8 installed on my pi

Hope you can help.

Tom

pi at elmer:/home/macbackup $ lsusb | grep ipp

Bus 001 Device 004: ID 09ae:3024 Tripp Lite

pi at elmer:/home/macbackup $ sudo cat /etc/nut/nut.conf

# Network UPS Tools: example nut.conf

#

##############################################################################

# General section

##############################################################################

# The MODE determines which part of the NUT is to be started, and which

# configuration files must be modified.

#

# This file try to standardize the various files being found in the field, like

# /etc/default/nut on Debian based systems, /etc/sysconfig/ups on RedHat based

# systems, ... Distribution's init script should source this file to see which

# component(s) has to be started.

#

# The values of MODE can be:

# - none: NUT is not configured, or use the Integrated Power Management, or use

#   some external system to startup NUT components. So nothing is to be started.

# - standalone: This mode address a local only configuration, with 1 UPS

#   protecting the local system. This implies to start the 3 NUT layers (driver,

#   upsd and upsmon) and the matching configuration files. This mode can also

#   address UPS redundancy.

# - netserver: same as for the standalone configuration, but also need

#   some more network access controls (firewall, tcp-wrappers) and possibly a

#   specific LISTEN directive in upsd.conf.

#   Since this MODE is opened to the network, a special care should be applied

#   to security concerns.

# - netclient: this mode only requires upsmon.

#

# IMPORTANT NOTE:

#  This file is intended to be sourced by shell scripts.

#  You MUST NOT use spaces around the equal sign!

MODE=none

[tripplite]

     driver = usbhid-ups

     port = auto

     productid=3024

     desc = "Tripp Lite Internet600U"

pi at elmer:/home/macbackup $ sudo systemctl start nut-driver

Job for nut-driver.service failed because the control process exited with error code.

See "systemctl status nut-driver.service" and "journalctl -xe" for details.

>From the log file:

May 20 13:51:47 elmer systemd[1]: Starting Network UPS Tools - power device driver controller...

May 20 13:51:47 elmer upsdrvctl[2658]: This TrippLite device (09ae:3024) is not (or perhaps not yet) supported

May 20 13:51:47 elmer upsdrvctl[2658]: by usbhid-ups. Please make sure you have an up-to-date version of NUT. If

May 20 13:51:47 elmer upsdrvctl[2658]: this does not fix the problem, try running the driver with the

May 20 13:51:47 elmer upsdrvctl[2658]: '-x productid=3024' option. Please report your results to the NUT user's

May 20 13:51:47 elmer upsdrvctl[2658]: mailing list <mailto:nut-upsuser at lists.alioth.debian.org>.

May 20 13:51:47 elmer upsdrvctl[2658]: Network UPS Tools - Generic HID driver 0.41 (2.7.4)

May 20 13:51:47 elmer upsdrvctl[2658]: USB communication driver 0.33

May 20 13:51:47 elmer upsdrvctl[2658]: No matching HID UPS found

May 20 13:51:47 elmer upsdrvctl[2658]: Driver failed to start (exit status=1)

May 20 13:51:52 elmer upsdrvctl[2658]: This TrippLite device (09ae:3024) is not (or perhaps not yet) supported

May 20 13:51:52 elmer upsdrvctl[2658]: by usbhid-ups. Please make sure you have an up-to-date version of NUT. If

May 20 13:51:52 elmer upsdrvctl[2658]: this does not fix the problem, try running the driver with the

May 20 13:51:52 elmer upsdrvctl[2658]: '-x productid=3024' option. Please report your results to the NUT user's

May 20 13:51:52 elmer upsdrvctl[2658]: mailing list <mailto:nut-upsuser at lists.alioth.debian.org>.

May 20 13:51:52 elmer upsdrvctl[2658]: Network UPS Tools - Generic HID driver 0.41 (2.7.4)

May 20 13:51:52 elmer upsdrvctl[2658]: USB communication driver 0.33

May 20 13:51:52 elmer upsdrvctl[2658]: No matching HID UPS found

May 20 13:51:52 elmer upsdrvctl[2658]: Driver failed to start (exit status=1)

May 20 13:51:58 elmer upsdrvctl[2658]: This TrippLite device (09ae:3024) is not (or perhaps not yet) supported

May 20 13:51:58 elmer upsdrvctl[2658]: by usbhid-ups. Please make sure you have an up-to-date version of NUT. If

May 20 13:51:58 elmer upsdrvctl[2658]: this does not fix the problem, try running the driver with the

May 20 13:51:58 elmer upsdrvctl[2658]: '-x productid=3024' option. Please report your results to the NUT user's

May 20 13:51:58 elmer upsdrvctl[2658]: mailing list <mailto:nut-upsuser at lists.alioth.debian.org>.

May 20 13:51:58 elmer upsdrvctl[2658]: Network UPS Tools - Generic HID driver 0.41 (2.7.4)

May 20 13:51:58 elmer upsdrvctl[2658]: USB communication driver 0.33

May 20 13:51:58 elmer upsdrvctl[2658]: No matching HID UPS found

May 20 13:51:58 elmer systemd[1]: nut-driver.service: Control process exited, code=exited, status=1/FAILURE

May 20 13:51:58 elmer upsdrvctl[2658]: Driver failed to start (exit status=1)

May 20 13:51:58 elmer upsdrvctl[2658]: Network UPS Tools - UPS driver controller 2.7.4

May 20 13:51:58 elmer systemd[1]: nut-driver.service: Failed with result 'exit-code'.

May 20 13:51:58 elmer systemd[1]: Failed to start Network UPS Tools - power device driver controller.

---- On Wed, 20 May 2020 13:46:09 -0400 David Zomaya <mailto:David_Zomaya at tripplite.com> wrote ----

Tested a Ubuntu 18.04 LTS virtual machine with NUT 2.7.4 and a 3024 protocol Tripp Lite UPS (mine is a INTERNET550U, but same protocol) 

:/etc/nut$ lsusb | grep Tripp
 Bus 002 Device 004: ID 09ae:3024 Tripp Lite

I it got generally working (outputting reasonable responses to upsc, although there are some issues with variables like frequency) by adding productid=3024 to my ups.conf. Like this:

[TrippLiteUPS3024]
         driver = usbhid-ups
         port = auto
         productid=3024

Here is the upsc output:

:/etc/nut$ sudo upsc TrippLiteUPS3024
 Init SSL without certificate database
 battery.charge: 100
 battery.charge.warning: 30
 battery.runtime: 1850
 battery.type: PbAc
 battery.voltage: 0.0
 battery.voltage.nominal: 12.0
 device.mfr: Tripp Lite
 device.model: INTERNET550U
 device.serial: 2951EVLBC87B503245
 device.type: ups
 driver.name: usbhid-ups
 driver.parameter.pollfreq: 30
 driver.parameter.pollinterval: 2
 driver.parameter.port: auto
 driver.parameter.productid: 3024
 driver.parameter.synchronous: no
 driver.version: 2.7.4
 driver.version.data: TrippLite HID 0.82
 driver.version.internal: 0.41
 input.frequency: 6010.0
 input.transfer.high: 145.0
 input.transfer.low: 95.0
 input.voltage: 0.0
 input.voltage.nominal: 120
 output.current: 0.0
 output.frequency: 6010.0
 output.frequency.nominal: 60
 output.voltage: 0.0
 output.voltage.nominal: 120
 ups.beeper.status: disabled
 ups.delay.shutdown: 20
 ups.delay.start: 30
 ups.load: 0
 ups.mfr: Tripp Lite
 ups.model: INTERNET550U
 ups.power: 0.0
 ups.power.nominal: 550
 ups.productid: 3024
 ups.serial: 2951EVLBC87B503245
 ups.status: OL
 ups.timer.reboot: 65535
 ups.timer.shutdown: 65535
 ups.timer.start: 65535
 ups.vendorid: 09ae
 ups.watchdog.status: 0
 :/etc/nut$

Tom: Let me know if this helps you.

List in general: would this help solve general 3024 issues?

Thank you,

David Zomaya

Tripp Litehttp://www.tripplite.com/  

From: Nut-upsuser <nut-upsuser-bounces+david_zomaya=mailto:tripplite.com at alioth-lists.debian.net>
 on behalf of David Zomaya
 Sent: Wednesday, May 20, 2020 8:49 AM
 To: Tom Cooper
 Cc: nut-upsuser
 Subject: [POSSIBLE FRAUD] Re: [Nut-upsuser] [EXTERNAL] Re: Help with Tripp Lite Internet600U  

Will do. Ball in my court for now.

Thank you,

David Zomaya

Tripp Litehttp://www.tripplite.com/  

From: Tom Cooper <mailto:tom at cooperfamily.xyz>
 Sent: Wednesday, May 20, 2020 8:47:28 AM
 To: David Zomaya
 Cc: nut-upsuser
 Subject: Re: [EXTERNAL] Re: [Nut-upsuser] Help with Tripp Lite Internet600U  

That would be great.  If there is something I can do to collect data or troubleshoot, please let me know.

---- On Wed, 20 May 2020 08:51:14 -0400 David Zomaya <mailto:David_Zomaya at tripplite.com> wrote ----

I'm still working remotely, but I should be able to get something set up soon.

I'll reply all here once I have something to report.

Thank you,

David Zomaya

Tripp Litehttp://www.tripplite.com/  

From: Tom Cooper <mailto:tom at cooperfamily.xyz>
 Sent: Wednesday, May 20, 2020 7:48:32 AM
 To: David Zomaya
 Cc: nut-upsuser
 Subject: Re: [EXTERNAL] Re: [Nut-upsuser] Help with Tripp Lite Internet600U  

I'm running Raspbian Buster, but given that the error seems to be "higher order" than a hardware issue - one of parsing the protocol?  I suspect that Ubuntu would be a decent "lookalike" to model the issue. 

---- On Tue, 19 May 2020 22:31:56 -0400 David Zomaya <mailto:David_Zomaya at tripplite.com> wrote ----

If I installed and tested against Ubuntu, how useful would that be in general and in this specific case? 

I think we've seen a few reports of issues with the newer 3024 protocols and I'd like to help get them sorted out. 

Thank you,

David Zomaya

Tripp Lite

From: Nut-upsuser <nut-upsuser-bounces+david_zomaya=mailto:tripplite.com at alioth-lists.debian.net>
 on behalf of Charles Lepple <mailto:clepple at gmail.com>
 Sent: Tuesday, May 19, 2020 9:24 PM
 To: Tom Cooper
 Cc: nut-upsuser
 Subject: [EXTERNAL] Re: [Nut-upsuser] Help with Tripp Lite Internet600U  

This is an EXTERNAL email.  Please take a moment and think before clicking any links or opening any attachments from this email.  If suspicious, please forward to mailto:ishelpdesk at tripplite.com for review.

 ______________________________________________________________________
 On May 19, 2020, at 9:21 PM, Tom Cooper <mailto:tom at cooperfamily.xyz> wrote:
 > 
 > Bus 001 Device 004: ID 09ae:3024 Tripp Lite 
 > 
 We have only had reports of success with protocol 2010 of INTERNET600U (which would be 09ae:2010 in lsusb).

 More details: https://urldefense.proofpoint.com/v2/url?u=https-3A__alioth-2Dlists.debian.net_pipermail_nut-2Dupsuser_2020-2DApril_011803.html&d=DwIGaQ&c=f9s1WCuF-N6cmD_YaZ7gBg&r=lhr3k4au5dVQgHY_iS-v_t9g8PHVkn8Px_wyaupZGfQ&m=PY3fmIYRp20XyPJAWtuIoMta82maER1CGSdOB3x6HEM&s=9Ri1IbEOy_cyZZctw4a1IFxUMKAIwhu2xTRnjanyorI&e= 

 _______________________________________________
 Nut-upsuser mailing list
 mailto:Nut-upsuser at alioth-lists.debian.net
 https://urldefense.proofpoint.com/v2/url?u=https-3A__alioth-2Dlists.debian.net_cgi-2Dbin_mailman_listinfo_nut-2Dupsuser&d=DwIGaQ&c=f9s1WCuF-N6cmD_YaZ7gBg&r=lhr3k4au5dVQgHY_iS-v_t9g8PHVkn8Px_wyaupZGfQ&m=PY3fmIYRp20XyPJAWtuIoMta82maER1CGSdOB3x6HEM&s=374XOzWi2asZji_KmGBZFGWtzgxtuHrjfrzcGP8Fsvw&e= 
 _______________________________________________
 Nut-upsuser mailing list
 mailto:Nut-upsuser at alioth-lists.debian.net
 https://urldefense.proofpoint.com/v2/url?u=https-3A__alioth-2Dlists.debian.net_cgi-2Dbin_mailman_listinfo_nut-2Dupsuser&d=DwIGaQ&c=f9s1WCuF-N6cmD_YaZ7gBg&r=lhr3k4au5dVQgHY_iS-v_t9g8PHVkn8Px_wyaupZGfQ&m=PY3fmIYRp20XyPJAWtuIoMta82maER1CGSdOB3x6HEM&s=374XOzWi2asZji_KmGBZFGWtzgxtuHrjfrzcGP8Fsvw&e= 

This message is for the addressee's use only. It may contain confidential information. If you receive this message in error, please delete it and notify the sender. Tripp Lite disclaims all warranties and liabilities,
 and assumes no responsibility for viruses which may infect an email sent to you from Tripp Lite and which damage your electronic systems or information. It is your responsibility to maintain virus detection systems to prevent damage to your electronic systems
 and information.

This message is for the addressee's use only. It may contain confidential information. If you receive this message in error, please delete it and notify the sender. Tripp Lite disclaims all warranties and liabilities, and assumes
 no responsibility for viruses which may infect an email sent to you from Tripp Lite and which damage your electronic systems or information. It is your responsibility to maintain virus detection systems to prevent damage to your electronic systems and information.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20200520/25645ef6/attachment-0001.html>