[Nut-upsuser] dual cyberpower 2200 on windows

[Richard Ward]

thank you. I'll give it a go.

I havent noticed that bug, however I have seen that the UPS load is
apparently 0% right now, so i must have accidentaly created a perpetual
energy device along the way!

On Fri, 12 Aug 2022 at 21:17, Charles Lepple <clepple at gmail.com> wrote:

> On Aug 11, 2022, at 10:46 PM, Richard Ward <richard at kafiandrich.com>
> wrote:
> >
> > Thanks Charles,
> >
> > The devices are the same make and model, bought at the same time. both
> return the following when running upsc, and I cant see any way to
> distiguish the 2 apart. Any suggestions, other than to connect them to
> different servers? :
> >
> Maybe you can use the "bus=" parameter? I don't know; 2.6.5 is pretty old,
> and I haven't done much with the Windows branch on actual hardware.
>
> > battery.charge: 100
> > battery.charge.low: 10
> > battery.charge.warning: 20
> > battery.mfr.date: CPS
> > battery.runtime: 1031
> > battery.runtime.low: 300
> > battery.type: PbAcid
> > battery.voltage: 17.3
>
> Also, beware of the CyberPower HID bugs, e.g.
> https://github.com/networkupstools/nut/issues/439 (I vaguely remember a
> similar bug for battery.voltage)
>
> >
> > _______________________________________________
> > Nut-upsuser mailing list
> > Nut-upsuser at alioth-lists.debian.net
> > https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20220813/c4ccd228/attachment.htm>