[Nut-upsuser] Controlling Outlets on UPS

[Manuel Wolfshant]

On April 12, 2023 12:34:19 AM GMT+03:00, Steve Bradford via Nut-upsuser <nut-upsuser at alioth-lists.debian.net> wrote:
>I have a Tripp Lite UPS and I have a configuration switch on one load and
>the PC plugged into the other load of the UPS is there any way to control
>the outlets of the UPS using NUT to allow the load the Switch is one to
>turn on before the PC load? I keep playing around with cloner drivers but
>they don't seem to be registering in the UPS

There are two things that I would try in order to set this up:
- snmp
- rw variables

Regards,

wolfy