[Nut-upsuser] Weird usbhid-ups issue with Eaton 9PX1500RT-L
Keith Amidon
camalot at picnicpark.org
Mon Mar 24 18:25:19 GMT 2025
I previously had NUT working correctly with a CyberPower UPS. In a bid to
improve the longevity of the batteries and the reliability of power
reporting, I replaced it with an Eaton 9PX1500RT-L. With the the ups
driver is not coming up with the Eaton and best I can figure out it is
because it finds it but then gets an error while reading information
from it.
This is on current unstable NixOS, using the packaged version of NUT,
which is 2.8.2.
My ups.conf is pretty simple:
------- start of ups.conf
maxstartdelay = 45
[Garage-Eaton9PX1500L]
driver = usbhid-ups
port = auto
desc = "UPS for garage systems"
sdorder = 0
serial = PG00R42NT5
------- end of ups.conf
I have tried without the "serial" line as will. To debug, I'm running
upsdrvctl manually as follows:
NUT_CONFPATH=/etc/nut NUT_STATEPATH=/var/lib/nut/ upsdrvctl -DDD -d -u root start
I'll paste the full output below, but I think the key information is
the section when matching the UPS device:
----- start of extract of upsdrvctl debug output
0.039924 [D2] Checking device 2 of 14 (0463/FFFF)
0.061508 [D2] - VendorID: 0463
0.061520 [D2] - ProductID: ffff
0.061524 [D2] - Manufacturer: EATON
0.061528 [D2] - Product: Eaton 9PX
0.061532 [D2] - Serial Number: PG00R42NT5
0.061536 [D2] - Bus: 007
0.061540 [D2] - Bus Port: 004
0.061544 [D2] - Device: 002
0.061548 [D2] - Device release number: 0202
0.061564 [D2] Trying to match device
0.061569 [D2] match_function_subdriver (non-SHUT mode): matching a device...
0.061575 [D3] match_function_regex: matching a device...
0.061606 [D2] Device matches
0.061611 [D2] Reading configuration descriptor 1 of 1
0.061620 [D3] libusb_kernel_driver_active() returned 0: Success
0.061639 [D2] Claimed interface 0 successfully
0.061646 [D3] nut_usb_set_altinterface: skipped libusb_set_interface_alt_setting(udev, 0, 0)
0.065483 [D2] Retrieved HID descriptor (expected 9, got 9)
0.065498 [D3] HID descriptor, method 1: (9 bytes) => 09 21 10 01 21 01 22 5f 12
0.065502 [D3] HID descriptor length (method 1) 4703
0.065508 [D3] HID descriptor, method 2: (9 bytes) => 09 21 10 01 21 01 22 84 04
0.065513 [D3] HID descriptor length (method 2) 1156
0.065518 [D1] Eaton device v2.02. Using full report descriptor
0.065524 [D2] Warning: two different HID descriptors retrieved (Reportlen = 4703 vs. 1156)
0.065528 [D2] HID descriptor length 4703
0.065541 [D2] Unable to get Report descriptor: Resource temporarily unavailable
----- end of extract of upsdrvctl debug output
After this it starts checking the next device. Notice the two HID
descriptors reported and the error:
Unable to get Report descriptor: Resource temporarily unavailable
After this the next line is about checking the next device. I also
get errors when dumping detailed information about the device using lsusb:
------- start of output of 'lsusb -d 0463:ffff -vv >/dev/null'
can't get debug descriptor: Resource temporarily unavailable
------- end of output of 'lsusb -d 0463:ffff -vv >/dev/null'
I omitted standard output because a lot of information is dumped. If it is useful
I can provide it.
However, I can read a descriptor using usbhid-dump:
-------- start of 'usbhid-dump -a 7:2' output
007:002:000:DESCRIPTOR 1742839889.022109
05 84 09 04 A1 01 09 10 A1 00 09 12 A1 00 06 FF
FF 09 90 85 21 75 08 95 01 15 00 26 FF 00 65 00
55 00 B1 83 05 85 09 83 85 23 75 20 27 FF FF FF
7F 67 01 10 10 00 B1 83 05 84 09 02 A1 02 09 60
85 27 75 08 26 FF 00 65 00 B1 83 09 60 81 83 C0
06 FF FF 09 EC 85 26 B1 83 05 84 09 58 85 24 B1
82 06 FF FF 09 40 85 26 B1 83 C0 05 84 09 14 A1
00 06 FF FF 09 6B B1 83 05 84 09 02 A1 02 06 FF
FF 09 79 85 27 B1 83 09 79 81 83 05 84 09 62 B1
83 09 62 81 83 09 6D B1 83 09 6D 81 83 06 FF FF
09 74 B1 83 09 74 81 83 09 75 B1 83 09 75 81 83
C0 09 E9 85 26 B1 83 C0 C0 09 E0 85 FF 95 FF 27
FF FF FF 7F B1 82 09 E0 85 FE 95 0A B1 82 05 84
09 1E A1 81 09 42 85 14 95 01 26 FF 00 66 01 F0
B1 83 09 40 67 21 D1 F0 00 55 07 B1 83 09 1F 85
0B 65 00 55 00 B1 03 C0 09 1E A1 84 09 44 85 74
75 10 27 FF FF 00 00 66 21 D1 55 07 B1 83 09 43
B1 83 09 42 85 0D 75 08 26 FF 00 66 01 F0 55 00
B1 82 09 40 85 72 75 10 27 FF FF 00 00 67 21 D1
F0 00 55 07 B1 82 09 1F 85 0B 75 08 26 FF 00 65
00 55 00 B1 03 C0 09 18 A1 00 09 20 A1 81 C0 09
20 A1 82 C0 09 20 A1 83 C0 C0 09 16 A1 00 06 FF
FF 09 12 A1 00 05 84 09 36 85 42 75 10 27 FF FF
00 00 67 01 00 01 00 B1 83 C0 06 FF FF 09 41 85
4A 75 08 26 FF 00 65 00 B1 03 09 14 A1 00 05 84
09 36 85 42 75 10 27 FF FF 00 00 67 01 00 01 00
B1 83 C0 09 1C A1 00 09 34 66 21 D1 55 07 B1 83
09 33 B1 83 09 31 67 01 00 10 00 55 0F B1 83 06
FF FF 09 86 75 08 26 FF 00 65 00 55 00 B1 83 05
84 09 32 75 10 27 FF FF 00 00 66 01 F0 55 0F B1
83 06 FF FF 09 69 75 08 26 FF 00 65 00 55 00 B1
83 05 84 09 30 75 10 27 FF FF 00 00 67 21 D1 F0
00 55 06 B1 83 C0 06 FF FF 09 16 A1 00 05 84 09
36 67 01 00 01 00 55 00 B1 83 C0 06 FF FF 09 40
85 4A 75 08 26 FF 00 65 00 B1 03 C0 05 84 09 24
A1 00 06 FF FF 09 22 A1 00 09 98 85 07 75 10 27
FF FF 00 00 B1 83 09 97 75 20 27 FF FF FF 7F 66
01 10 B1 83 C0 05 85 09 8D 85 0C 75 08 26 FF 00
65 00 B1 03 09 2C B1 03 06 FF FF 09 98 85 0B B1
83 05 84 09 40 85 0D 75 10 27 FF FF 00 00 67 21
D1 F0 00 55 07 B1 03 06 FF FF 09 95 85 0B 75 08
26 FF 00 65 00 55 00 B1 03 05 84 09 57 85 09 75
20 15 FF 27 FF FF FF 7F 66 01 10 B1 82 09 56 85
0A B1 82 05 85 09 83 85 0C 75 08 15 00 26 FF 00
65 00 B1 03 05 84 09 1F 85 0B B1 03 05 85 09 67
85 0C B1 03 09 89 85 10 B1 03 05 84 09 FD B1 03
06 FF FF 09 F0 B1 03 05 85 09 8F B1 03 06 FF FF
09 F3 B1 03 05 84 09 FE B1 03 06 FF FF 09 F4 B1
03 05 84 09 FF B1 03 06 FF FF 09 F1 B1 03 09 94
85 07 B1 83 05 84 09 35 B1 83 09 25 85 0B B1 03
09 02 A1 02 05 85 09 D0 85 01 B1 83 09 D0 81 83
09 42 B1 83 09 42 81 83 09 44 B1 83 09 44 81 83
05 84 09 73 85 03 B1 83 09 73 81 83 06 FF FF 09
2E B1 83 09 2D 85 01 B1 83 09 2D 81 83 05 85 09
45 B1 83 09 45 81 83 06 FF FF 09 68 85 03 B1 83
09 68 81 83 09 77 B1 83 09 77 81 83 05 84 09 61
85 01 B1 83 09 61 81 83 09 62 85 02 B1 83 09 62
81 83 05 85 09 4B B1 83 09 4B 81 83 05 84 09 65
B1 83 09 65 81 83 09 67 85 03 B1 83 09 67 81 83
09 69 85 02 B1 83 09 69 81 83 09 6C 85 05 B1 82
09 6C 81 82 06 FF FF 09 AE 85 02 B1 83 09 AE 81
83 C0 05 85 09 66 85 06 B1 83 09 66 81 83 09 29
85 08 B1 83 06 FF FF 09 4D 85 12 B1 82 05 85 09
2A 85 17 75 10 27 FF FF 00 00 66 01 10 B1 82 06
FF FF 09 5F 85 0E 75 08 26 FF 00 65 00 B1 82 05
85 09 68 85 06 75 20 27 FF FF FF 7F 66 01 10 B1
83 09 68 81 83 06 FF FF 09 48 85 11 75 08 26 FF
00 65 00 B1 82 09 E9 85 07 B1 83 05 84 09 36 75
10 27 FF FF 00 00 67 01 00 01 00 B1 83 06 FF FF
09 97 85 29 75 20 27 FF FF FF 7F 66 01 10 B1 82
09 91 85 07 B1 83 05 84 09 30 75 10 27 FF FF 00
00 67 21 D1 F0 00 55 06 B1 83 C0 06 FF FF 09 E5
A1 00 C0 C0
-------- end of 'usbhid-dump -a 7:2' output
Based on this I don't think NUT specifically is at fault, though most
results from relevant Google searches seem to indicate that this is likely
a hardware or device firmware issue. Since the USB port on the computer was
working fine with the Cyberpower UPS I'm suspecting a firmware issue with
the Eaton. However, it isn't obvious to me that there are updates from
Eaton's web site.
I tried a few different index values for usb_hid_rep_index and
usb_hid_ep_in in the hope that might avoid the resource unavailable error.
Does anyone more knowledgeable about NUT than I am have suggestions for me?
Thanks in advance for any help you can provide!
--- Keith
------ start of full upsdrvctl debug output
0.000000 [D1] upsdrvctl commanding all drivers (1 found): (null)
0.000017 [D1] Starting UPS: Garage-Eaton9PX1500L
0.000026 [D1] WARNING: Requested a debugging level but not explicitly a backgrounding mode - driver may never try to fork away; however the upsdrvctl tool will fork it and not wait.
0.000031 [D2] 1 remaining attempts
0.000036 [D2] exec: /nix/store/wz0wy2qy7gmj84fnjxp4y3pyy7zvy3b0-nut-2.8.2/bin/usbhid-ups -DDD -a Garage-Eaton9PX1500L -u root
0.000249 [D2] Starting driver with debug but without explicit backgrounding: will not wait for it to fork and detach, continuing...
0.000277 [D1] upsdrvctl: successfully finished
0.000282 [D1] Completed the job of upsdrvctl tool, cleaning up and exiting now
0.000290 [D1] Completed the job of upsdrvctl tool, clean-up finished, exiting now
Network UPS Tools - UPS driver controller 2.8.2
0.000000 [D1] upsdrv_makevartable...
0.000030 [D1] Using USB implementation: libusb-1.0.27 (API: 0x100010a)
0.000072 [D3] do_global_args: var='maxstartdelay' val='45'
0.000079 [D3] main_arg: var='driver' val='usbhid-ups'
0.000087 [D3] main_arg: var='port' val='auto'
0.000092 [D3] main_arg: var='desc' val='UPS for garage systems'
0.000096 [D3] main_arg: var='sdorder' val='0'
0.000099 [D3] main_arg: var='serial' val='PG00R42NT5'
0.000110 [D1] Built-in default or configured user for drivers 'nobody' was ignored due to 'root' specified on command line
0.000113 [D1] Network UPS Tools version 2.8.2 (release/snapshot of 2.8.2) built with gcc (GCC) 13.3.0 and configured with flags: --disable-static --disable-dependency-tracking --prefix=/nix/store/wz0wy2qy7gmj84fnjxp4y3pyy7zvy3b0-nut-2.8.2 --with-all --with-ssl --without-powerman --with-systemdsystemunitdir=$(out)/lib/systemd/system --with-systemdshutdowndir=$(out)/lib/systemd/system-shutdown --with-systemdtmpfilesdir=$(out)/lib/tmpfiles.d --with-udev-dir=$(out)/etc/udev
0.000122 [D1] debug level is '3'
0.001149 [D1] Succeeded to become_user(root): now UID=0 GID=0
0.001179 [D1] upsdrv_initups (non-SHUT)...
0.001184 [D2] Initializing an USB-connected UPS with library libusb-1.0.27 (API: 0x100010a) (NUT subdriver name='USB communication driver (libusb 1.0)' ver='0.47')
0.017847 [D2] Checking device 1 of 14 (1D6B/0003)
0.039346 [D1] nut_libusb_open: invalid libusb bus number 0
0.039496 [D2] - VendorID: 1d6b
0.039500 [D2] - ProductID: 0003
0.039503 [D2] - Manufacturer: Linux 6.6.83 xhci-hcd
0.039506 [D2] - Product: xHCI Host Controller
0.039509 [D2] - Serial Number: 0000:44:00.3
0.039512 [D2] - Bus: 008
0.039515 [D2] - Bus Port: unknown
0.039518 [D2] - Device: 001
0.039521 [D2] - Device release number: 0606
0.039524 [D2] Trying to match device
0.039528 [D2] match_function_subdriver (non-SHUT mode): matching a device...
0.039544 [D2] match_function_subdriver (non-SHUT mode): failed to match a subdriver to vendor and/or product ID
0.039548 [D2] Device does not match - skipping
0.039673 [D2] Checking device 2 of 14 (0463/FFFF)
0.061759 [D2] - VendorID: 0463
0.061767 [D2] - ProductID: ffff
0.061770 [D2] - Manufacturer: EATON
0.061772 [D2] - Product: Eaton 9PX
0.061775 [D2] - Serial Number: PG00R42NT5
0.061778 [D2] - Bus: 007
0.061781 [D2] - Bus Port: 004
0.061784 [D2] - Device: 002
0.061786 [D2] - Device release number: 0202
0.061800 [D2] Trying to match device
0.061803 [D2] match_function_subdriver (non-SHUT mode): matching a device...
0.061807 [D3] match_function_regex: matching a device...
0.061838 [D2] Device matches
0.061841 [D2] Reading configuration descriptor 1 of 1
0.061849 [D3] libusb_kernel_driver_active() returned 0: Success
0.061869 [D2] Claimed interface 0 successfully
0.061872 [D3] nut_usb_set_altinterface: skipped libusb_set_interface_alt_setting(udev, 0, 0)
0.065784 [D2] Retrieved HID descriptor (expected 9, got 9)
0.065794 [D3] HID descriptor, method 1: (9 bytes) => 09 21 10 01 21 01 22 5f 12
0.065798 [D3] HID descriptor length (method 1) 4703
0.065802 [D3] HID descriptor, method 2: (9 bytes) => 09 21 10 01 21 01 22 84 04
0.065815 [D3] HID descriptor length (method 2) 1156
0.065818 [D1] Eaton device v2.02. Using full report descriptor
0.065822 [D2] Warning: two different HID descriptors retrieved (Reportlen = 4703 vs. 1156)
0.065825 [D2] HID descriptor length 4703
0.065836 [D2] Unable to get Report descriptor: Resource temporarily unavailable
0.065856 [D2] Checking device 3 of 14 (1D6B/0002)
0.065877 [D1] nut_libusb_open: invalid libusb bus number 0
0.066011 [D2] - VendorID: 1d6b
0.066015 [D2] - ProductID: 0002
0.066018 [D2] - Manufacturer: Linux 6.6.83 xhci-hcd
0.066021 [D2] - Product: xHCI Host Controller
0.066023 [D2] - Serial Number: 0000:44:00.3
0.066026 [D2] - Bus: 007
0.066029 [D2] - Bus Port: unknown
0.066032 [D2] - Device: 001
0.066035 [D2] - Device release number: 0606
0.066038 [D2] Trying to match device
0.066041 [D2] match_function_subdriver (non-SHUT mode): matching a device...
0.066046 [D2] match_function_subdriver (non-SHUT mode): failed to match a subdriver to vendor and/or product ID
0.066049 [D2] Device does not match - skipping
0.066057 [D2] Checking device 4 of 14 (1D6B/0003)
0.087349 [D1] nut_libusb_open: invalid libusb bus number 0
0.087484 [D2] - VendorID: 1d6b
0.087488 [D2] - ProductID: 0003
0.087491 [D2] - Manufacturer: Linux 6.6.83 xhci-hcd
0.087494 [D2] - Product: xHCI Host Controller
0.087497 [D2] - Serial Number: 0000:0b:00.3
0.087500 [D2] - Bus: 006
0.087503 [D2] - Bus Port: unknown
0.087505 [D2] - Device: 001
0.087508 [D2] - Device release number: 0606
0.087511 [D2] Trying to match device
0.087515 [D2] match_function_subdriver (non-SHUT mode): matching a device...
0.087520 [D2] match_function_subdriver (non-SHUT mode): failed to match a subdriver to vendor and/or product ID
0.087523 [D2] Device does not match - skipping
0.087649 [D2] Checking device 5 of 14 (0D62/2106)
0.095541 [D2] - VendorID: 0d62
0.095548 [D2] - ProductID: 2106
0.095551 [D2] - Manufacturer: unknown
0.095554 [D2] - Product: USB Multimedia Keyboard
0.095557 [D2] - Serial Number: unknown
0.095560 [D2] - Bus: 005
0.095563 [D2] - Bus Port: 001
0.095565 [D2] - Device: 003
0.095568 [D2] - Device release number: 0450
0.095571 [D2] Trying to match device
0.095574 [D2] match_function_subdriver (non-SHUT mode): matching a device...
0.095580 [D2] match_function_subdriver (non-SHUT mode): failed to match a subdriver to vendor and/or product ID
0.095583 [D2] Device does not match - skipping
0.095592 [D2] Checking device 6 of 14 (0557/8021)
0.095614 [D2] - VendorID: 0557
0.095617 [D2] - ProductID: 8021
0.095620 [D2] - Manufacturer: unknown
0.095623 [D2] - Product: unknown
0.095626 [D2] - Serial Number: unknown
0.095628 [D2] - Bus: 005
0.095631 [D2] - Bus Port: 004
0.095634 [D2] - Device: 002
0.095637 [D2] - Device release number: 0100
0.095639 [D2] Trying to match device
0.095643 [D2] match_function_subdriver (non-SHUT mode): matching a device...
0.095647 [D2] match_function_subdriver (non-SHUT mode): failed to match a subdriver to vendor and/or product ID
0.095650 [D2] Device does not match - skipping
0.095656 [D2] Checking device 7 of 14 (1D6B/0002)
0.095671 [D1] nut_libusb_open: invalid libusb bus number 0
0.095805 [D2] - VendorID: 1d6b
0.095809 [D2] - ProductID: 0002
0.095812 [D2] - Manufacturer: Linux 6.6.83 xhci-hcd
0.095815 [D2] - Product: xHCI Host Controller
0.095817 [D2] - Serial Number: 0000:0b:00.3
0.095820 [D2] - Bus: 005
0.095823 [D2] - Bus Port: unknown
0.095826 [D2] - Device: 001
0.095829 [D2] - Device release number: 0606
0.095831 [D2] Trying to match device
0.095834 [D2] match_function_subdriver (non-SHUT mode): matching a device...
0.095839 [D2] match_function_subdriver (non-SHUT mode): failed to match a subdriver to vendor and/or product ID
0.095841 [D2] Device does not match - skipping
0.095849 [D2] Checking device 8 of 14 (1D6B/0003)
0.117331 [D1] nut_libusb_open: invalid libusb bus number 0
0.117475 [D2] - VendorID: 1d6b
0.117479 [D2] - ProductID: 0003
0.117482 [D2] - Manufacturer: Linux 6.6.83 xhci-hcd
0.117485 [D2] - Product: xHCI Host Controller
0.117488 [D2] - Serial Number: 0000:08:00.0
0.117491 [D2] - Bus: 004
0.117494 [D2] - Bus Port: unknown
0.117496 [D2] - Device: 001
0.117499 [D2] - Device release number: 0606
0.117502 [D2] Trying to match device
0.117505 [D2] match_function_subdriver (non-SHUT mode): matching a device...
0.117511 [D2] match_function_subdriver (non-SHUT mode): failed to match a subdriver to vendor and/or product ID
0.117514 [D2] Device does not match - skipping
0.117573 [D2] Checking device 9 of 14 (1D6B/0002)
0.117642 [D1] nut_libusb_open: invalid libusb bus number 0
0.117766 [D2] - VendorID: 1d6b
0.117770 [D2] - ProductID: 0002
0.117773 [D2] - Manufacturer: Linux 6.6.83 xhci-hcd
0.117776 [D2] - Product: xHCI Host Controller
0.117778 [D2] - Serial Number: 0000:08:00.0
0.117781 [D2] - Bus: 003
0.117784 [D2] - Bus Port: unknown
0.117787 [D2] - Device: 001
0.117790 [D2] - Device release number: 0606
0.117792 [D2] Trying to match device
0.117795 [D2] match_function_subdriver (non-SHUT mode): matching a device...
0.117800 [D2] match_function_subdriver (non-SHUT mode): failed to match a subdriver to vendor and/or product ID
0.117803 [D2] Device does not match - skipping
0.117829 [D2] Checking device 10 of 14 (1D6B/0003)
0.139390 [D1] nut_libusb_open: invalid libusb bus number 0
0.139525 [D2] - VendorID: 1d6b
0.139529 [D2] - ProductID: 0003
0.139532 [D2] - Manufacturer: Linux 6.6.83 xhci-hcd
0.139535 [D2] - Product: xHCI Host Controller
0.139538 [D2] - Serial Number: 0000:01:00.0
0.139541 [D2] - Bus: 002
0.139544 [D2] - Bus Port: unknown
0.139547 [D2] - Device: 001
0.139550 [D2] - Device release number: 0606
0.139552 [D2] Trying to match device
0.139556 [D2] match_function_subdriver (non-SHUT mode): matching a device...
0.139561 [D2] match_function_subdriver (non-SHUT mode): failed to match a subdriver to vendor and/or product ID
0.139564 [D2] Device does not match - skipping
0.139699 [D2] Checking device 11 of 14 (1050/0407)
0.150000 [D2] - VendorID: 1050
0.150008 [D2] - ProductID: 0407
0.150011 [D2] - Manufacturer: Yubico
0.150014 [D2] - Product: YubiKey OTP+FIDO+CCID
0.150017 [D2] - Serial Number: unknown
0.150019 [D2] - Bus: 001
0.150022 [D2] - Bus Port: 006
0.150025 [D2] - Device: 003
0.150028 [D2] - Device release number: 0512
0.150030 [D2] Trying to match device
0.150034 [D2] match_function_subdriver (non-SHUT mode): matching a device...
0.150039 [D2] match_function_subdriver (non-SHUT mode): failed to match a subdriver to vendor and/or product ID
0.150042 [D2] Device does not match - skipping
0.150051 [D2] Checking device 12 of 14 (0B05/1868)
0.248019 [D2] - VendorID: 0b05
0.248027 [D2] - ProductID: 1868
0.248030 [D2] - Manufacturer: unknown
0.248033 [D2] - Product: unknown
0.248036 [D2] - Serial Number: unknown
0.248038 [D2] - Bus: 001
0.248041 [D2] - Bus Port: 002
0.248044 [D2] - Device: 002
0.248047 [D2] - Device release number: 0001
0.248050 [D2] Trying to match device
0.248053 [D2] match_function_subdriver (non-SHUT mode): matching a device...
0.248059 [D2] match_function_subdriver (non-SHUT mode): failed to match a subdriver to vendor and/or product ID
0.248062 [D2] Device does not match - skipping
0.248071 [D2] Checking device 13 of 14 (0B05/1867)
0.265047 [D2] - VendorID: 0b05
0.265055 [D2] - ProductID: 1867
0.265058 [D2] - Manufacturer: AsusTek Computer Inc.
0.265061 [D2] - Product: AURA Custom Human interface
0.265063 [D2] - Serial Number: 00000000001A
0.265066 [D2] - Bus: 001
0.265069 [D2] - Bus Port: 011
0.265072 [D2] - Device: 004
0.265075 [D2] - Device release number: 0200
0.265077 [D2] Trying to match device
0.265081 [D2] match_function_subdriver (non-SHUT mode): matching a device...
0.265093 [D2] match_function_subdriver (non-SHUT mode): failed to match a subdriver to vendor and/or product ID
0.265096 [D2] Device does not match - skipping
0.265105 [D2] Checking device 14 of 14 (1D6B/0002)
0.265126 [D1] nut_libusb_open: invalid libusb bus number 0
0.265302 [D2] - VendorID: 1d6b
0.265307 [D2] - ProductID: 0002
0.265310 [D2] - Manufacturer: Linux 6.6.83 xhci-hcd
0.265313 [D2] - Product: xHCI Host Controller
0.265315 [D2] - Serial Number: 0000:01:00.0
0.265318 [D2] - Bus: 001
0.265321 [D2] - Bus Port: unknown
0.265324 [D2] - Device: 001
0.265327 [D2] - Device release number: 0606
0.265329 [D2] Trying to match device
0.265332 [D2] match_function_subdriver (non-SHUT mode): matching a device...
0.265337 [D2] match_function_subdriver (non-SHUT mode): failed to match a subdriver to vendor and/or product ID
0.265340 [D2] Device does not match - skipping
0.265348 [D2] libusb1: No appropriate HID device found
Network UPS Tools - Generic HID driver 0.53 (2.8.2)
USB communication driver (libusb 1.0) 0.47
0.265353 libusb1: Could not open any HID devices: insufficient permissions on everything
0.265356 No matching HID UPS found
0.265365 upsnotify: notify about state 4 with libsystemd: was requested, but not running as a service unit now, will not spam more about it
0.265370 upsnotify: failed to notify about state 4: no notification tech defined, will not spam more about it
------ end of full upsdrvctl debug output
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20250324/fdbd054b/attachment-0001.htm>
More information about the Nut-upsuser
mailing list