[sane-devel] Re: sane-gphoto2 problems with CanonPowerShote A10 and net.conf

[Peter Fales]

Try the latest SANE CVS.  You gphoto2.conf should have the lines:

topfolder=/
subdirs=0


-- 
Peter Fales			  Lucent Technologies, Room 4G-310
N9IYJ            		  2000 N Naperville Rd PO Box 3033
				  Naperville, IL 60566-7033
internet: psfales at lucent.com  	  work:	(630) 979-8031

On Thu, Jan 17, 2002 at 10:37:08AM -0600, Peter Fales wrote:
> On Thu, Jan 17, 2002 at 04:33:34PM +0000, jim.george at blueyonder.co.uk wrote:
> > That's it exactly under gphoto2 it looks like "/" no other folder options.
> > 
> > Should I change gphoto2.conf to be topfolder=/ ?
> 
> Yes, but it's still not going to work until I also make a change to the SANE
> backend.  It shouldn't be a major change, so I'll try to get to it 
> tonight.
> 
> And don't worry about about about turning on debug to check for the 
> "bad parameter" errors.  It is almost certainly due to my attempting 
> to look for directories under the DCIM directory.
> 
> Pete
> _______________________________________________
> Sane-devel mailing list
> Sane-devel at www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel