[sane-devel] Re: HP C2502A 3503

[Peter Kirchgessner]

Welcome to the club.

There are some problems with 2.4-kernels and Buslogic cards which may be 
  due to some changes in the kernel or in the Buslogic driver since 2.2. 
Please watch the sane-devel mailing list to see when a bugfix will be 
available. You can also browse the mailing list for reports of other 
people with the same problem.

--Peter

O-Zone wrote:

> On Thursday 30 May 2002 01:02, you wrote:
> 
>>Hi,
>>
>>just two short questions for the beginning: What's your kernel version
>>and your SCSI card ?
>>
>>--Peter
>>
> 
> OK, Kernel is 2.4.17 SCSI Card is BusLogic:
> 
> ***** BusLogic SCSI Driver Version 2.1.15 of 17 August 1998 *****
> Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
> Configuring BusLogic Model BT-930 PCI Ultra SCSI Host Adapter
>   Firmware Version: 5.02, I/O Address: 0xDC00, IRQ Channel: 10/Level
>   PCI Bus: 0, Device: 11, Address: 0xDFFFF000, Host Adapter SCSI ID: 7
>   Parity Checking: Enabled, Extended Translation: Enabled
>   Synchronous Negotiation: Ultra, Wide Negotiation: Disabled
>   Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
>   Driver Queue Depth: 255, Scatter/Gather Limit: 128 segments
>   Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
>   Error Recovery Strategy: Default, SCSI Bus Reset: Enabled
>   SCSI Bus Termination: Enabled, SCAM: Disabled
> *** BusLogic BT-930 Initialized Successfully ***
> 
> Target 3: Queue Depth 3, Asynchronous
> 
> Current Driver Queue Depth:	255
> Currently Allocated CCBs:	28
> 
> 
> 			   DATA TRANSFER STATISTICS
> 
> Target	Tagged Queuing	Queue Depth  Active  Attempted	Completed
> ======	==============	===========  ======  =========	=========
>    3	Not Supported	      3         0         1590	     1590
> 
> Target  Read Commands  Write Commands   Total Bytes Read    Total Bytes 
> Written
> ======  =============  ==============  ===================  
> ===================
>    3	         55	       110		      880	           495
> 
> Target  Command    0-1KB      1-2KB      2-4KB      4-8KB     8-16KB
> ======  =======  =========  =========  =========  =========  =========
>    3	 Read	        55          0          0          0          0
>    3	 Write	       110          0          0          0          0
> 
> Target  Command   16-32KB    32-64KB   64-128KB   128-256KB   256KB+
> ======  =======  =========  =========  =========  =========  =========
>    3	 Read	         0          0          0          0          0
>    3	 Write	         0          0          0          0          0
> 
> 
> 			   ERROR RECOVERY STATISTICS
> 
> 	  Command Aborts      Bus Device Resets	  Host Adapter Resets
> Target	Requested Completed  Requested Completed  Requested Completed
>   ID	\\\\ Attempted ////  \\\\ Attempted ////  \\\\ Attempted ////
> ======	 ===== ===== =====    ===== ===== =====	   ===== ===== =====
>    3	     0     0     0        0     0     0	       0     0     0
> 
> External Host Adapter Resets: 0
> Host Adapter Internal Errors: 0
> 
> 
> 


-- 
Peter Kirchgessner
http://www.kirchgessner.net
mailto:peter@kirchgessner.net