[sane-devel] Re: umax_pp works well with "port 0x378" bot not with "/dev/parport0"
Sven Hergenhahn
svenxy at gmx.net
Fri Oct 17 15:52:05 BST 2003
Hi Stef,
> It might be worth passing parameter to the parallel port module in
> /etc/modules.conf to have it used:
> options parport_pc io=0x378 irq=7 dma=none
OK, done. It works now as root with port /dev/parport0, but still as normal
user, I get the following:
sven at gimli:/dev$ /usr/src/sane-backends-1.0.12/tools/umax_pp -p -t 32
[sanei_debug] Setting debug level of umax_pp_low to 32.
[umax_pp_low] SANE_INB level 3
[umax_pp_low] sanei_umax_pp_InitPort(0x378,(null))
[umax_pp_low] sanei_ioperm() could not gain access to 0x378
failed to gain direct acces to port 0x378!
permissions are:
sven at gimli:/dev$ ls -l parp*
crw-rw-rw- 1 root lp 99, 0 2003-10-13 12:18 parport0
crw-rw-rw- 1 root lp 99, 1 2003-10-13 12:18 parport1
crw-rw-rw- 1 root lp 99, 2 2003-10-13 12:18 parport2
PPDIAG (as root) is still:
sven at gimli:/dev$ sudo /home/sven/bin/ppdiag
S01: parport built as module
S02: parport0:
S02: modes:PCSPP,TRISTATE,EPP
S02: ADDR :0x378
S02: IRQ :7
S02: DMA :no DMA used
S03: no parport parameters
S10: couldn't find if ppdev is built in or a module
S10: It is likely that your kernel configuration has no ppdev support
S10: exiting ...
Did I miss anything?
Thanks,
Sven
>
> Also, running the umax_pp tool with a trace level of 32 (-t 32) will give
> some hints on what modes are detected.
>
> Regards,
> Stef
>
> _______________________________________________
> sane-devel mailing list
> sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
More information about the sane-devel
mailing list