[sane-devel] Canon MP600R - Connection via LAN

[ikezoe]

Please look at "/etc/hosts.allow".
My hosts.allow have following line:

saned: 192.168.0.

Sorry, bad at English, be.

regards

m. allan noah wrote:
> i really, really doubt this scanner speaks the sane network protocol.
> this device is probably not supported by sane.
> 
> allan
> 
> On 4/17/07, Michael Brasse <michael.brasse at gmail.com> wrote:
>> Hello everybody,
>> Attempts to connect to the scanner of my new Canon MP600R via the
>> network was not successful.
>>
>> If I manage I am happy to provide test reports etc.
>>
>> If that is not the right place to ask, please refer - otherwise I am
>> happy for any ideas.
>>
>> The problem I have is:
>> sandmann:/etc/sane.d # SANE_DEBUG_NET=128 scanimage -L
>> [sanei_debug] Setting debug level of net to 128.
>> [net] sane_init: authorize = 0x804d560, version_code = 0xbff301d8
>> [net] sane_init: SANE net backend version 1.0.13 (AF-indep+IPv6) from
>> sane-backends 1.0.18
>> [net] sane_init: Client has little endian byte order
>> [net] sane_init: searching for config file
>> [net] sane_init: trying to add 192.168.0.2
>> [net] add_device: adding backend 192.168.0.2
>> [net] add_device: backend 192.168.0.2 added
>> [net] sane_init: done reading config
>> [net] sane_init: evaluating environment variable SANE_NET_HOSTS
>> [net] sane_init: done
>> [net] sane_get_devices: local_only = 0
>> [net] connect_dev: trying to connect to 192.168.0.2
>> [net] connect_dev: [0] failed to connect (Connection refused)
>> [net] connect_dev: [1] failed to connect (Connection refused)
>> [net] connect_dev: couldn't connect to host (see messages above)
>> [net] sane_get_devices: ignoring failure to connect to 192.168.0.2
>> [net] sane_get_devices: finished (0 devices)
>>
>> No scanners were identified. If you were expecting something different,
>> check that the scanner is plugged in, turned on and detected by the
>> sane-find-scanner tool (if appropriate). Please read the documentation
>> which came with this software (README, FAQ, manpages).
>> [net] sane_exit: exiting
>> [net] sane_exit: closing dev 0x8054f68, ctl=-1
>> [net] sane_exit: finished.
>>
>> also:
>> sandmann:/etc/sane.d # telnet 192.168.0.2 6566
>> Trying 192.168.0.2...
>> telnet: connect to address 192.168.0.2: Connection refused
>>
>> Printing works, ping works, the web-server of the device works, there
>> is no firewall running on my machine - but scanning doesn't work.
>>
>> This is what I have configured (this is all I know):
>>
>> sandmann:/etc/sane.d # cat net.conf
>> # This is the net config file.  Each line names a host to attach to.
>> # If you list "localhost" then your backends can be accessed either
>> # directly or through the net backend.  Going through the net backend
>> # may be necessary to access devices that need special privileges.
>> # localhost
>> 192.168.0.2
>>
>> sandmann:/etc/sane.d # cat dll.conf
>> # enable the next line if you want to allow access through the network:
>> net
>> #abaton
>> #agfafocus
>> #apple
>> ...
>>
>> sandmann:/etc # cat services
>> ...
>> #               6559-6565  Unassigned
>> sane-port       6566/tcp   # SANE Control Port
>> sane-port       6566/udp   # SANE Control Port
>> #               6567-6578  Unassigned
>> affiliate       6579/tcp   # Affiliate
>> ...
>>
>> The following versions of sane run on my machine (openSuse 10.2):
>> mbrasse at sandmann:~> rpm -qa *sane*
>> sane-backends-1.0.18-14
>> sane-frontends-1.0.14-69
>> python-imaging-sane-1.1.6-3
>> xsane-0.994-8
>>
>> Also the latest mp150-0.13.0.tar.bz2 from
>> http://home.arcor.de/wittawat/pixma/ is downloaded and installed (it
>> should contain the latest patches from
>> http://pixma-mp600.sourceforge.jp/ which are mentioned several times.
>>
>> Thanks for any hint.
>>
>> Best regards
>>              Micha
>>
>>
>> -- 
>> ____________________________________
>> Michael Brasse
>> Kelliweg 26
>> CH-8810 Zürich
>>
>> +41 44 381 4046
>> +41 79 636 8960
>>
>> -- 
>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>>              to sane-devel-request at lists.alioth.debian.org
>>
> 
> 

-- 
Masataka Ikezoe
mailto: pla-nett at m4.kcn.ne.jp