[sane-devel] Fwd: fujitsu 5120c --souce error invalid argument

[patrick blanchard]

OK, I'll try the CVS version again but want to clarify a build problem..

typically I

mkdir ./build && cd build
../configure

so as not to pollute src directory. but i think this gives an error because
makefile.in expects the build in src directory?

On 6/26/07, m. allan noah < kitno455 at gmail.com> wrote:
>
> On 6/25/07, Skorous < skorous at gmail.com> wrote:
> > I'm sure allan will respond to this shortly as he's pretty active on
> > the list but since I'm here right now: are you sure you're using the
> > argument properly? Have you tried quoting the argument ( i.e. --source
> > "ADF Duplex" )? I use those options with the 3091DC and it works fine
> > ( same backend ).
> >
>
> yes- if you find that quoting the source option does not help, then
> you will need to get a debug log so we can troubleshoot.
>
> the backend should work with scsi just fine, though i dont know what
> the scanner will think about low speeds.
>
> you probably want to use the cvs version of sane, there have been some
> updates since 1.0.18 was released.
>
> allan
>
> > Marty
> >
> > On 6/25/07, patrick blanchard <dspcypher at gmail.com> wrote:
> > > Hi,
> > > first, thanks to the sane team and the fujitsu backenders.
> > >
> > > 1.0.18 builds on ubuntu 6.06.1 and scanimage works well w/ most
> options that
> > > i tested so far - color, batch... and i'm still testing different
> options to
> > > scanimage.
> > >
> > > however, the ADF Front, ADF Back, ADF Duplex option of course defaults
> to
> > > ADF Front and any option passed to scanimage --source foo returns an
> invalid
> > > arg. I think this is the reason why xscanner is broken btw, because it
> tries
> > > to pass --source and returns an error. also, i am using scsi, and have
> set
> > > scsi eeprom to the lowest async settings available. i'm testing for
> > > synchronous and higher speeds right now
> > >
> > > so here is my question. will you help me configure or change makefile
> to
> > > build just for fujitsu 5120c? or, even better, to help me debug the
> backend
> > > so the --source option works?
> > >
> > > fwiw, i work w/ embedded systems and use simple makefiles only.
> however, i
> > > am reading the auto* toolset documentation because i have an interest
> in
> > > porting some of my projects. i plan on working this fujitsu backend as
> a
> > > learning tool for the auto* toolset.
> > >
> > > also, this fujitsu 5120c was chosen for it's duplex and insurance card
> > > scanning ability - and specifically requested by a client for
> intallation
> > > into a medical clinic. i don't really need xscanner to work but it
> would be
> > > nice and i think once the --source option is working then xscanner
> will too.
> > >
> > > thanks again to any and all replies.
> > >
> > > --
> > > sane-devel mailing list: sane-devel at lists.alioth.debian.org
> > > http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> > > Unsubscribe: Send mail with subject "unsubscribe your_password"
> > >              to sane-devel-request at lists.alioth.debian.org
> > >
> >
> > --
> > sane-devel mailing list: sane-devel at lists.alioth.debian.org
> > http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> > Unsubscribe: Send mail with subject "unsubscribe your_password"
> >              to sane-devel-request at lists.alioth.debian.org
> >
>
>
> --
> "The truth is an offense, but not a sin"
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20070627/4ffd738c/attachment.htm