[sane-devel] Formulardaten
stef
stef.dev at free.fr
Wed Jan 30 21:19:56 UTC 2008
Le Sunday 27 January 2008 12:04:42 cgi-mailer at kundenserver.de, vous avez
écrit :
> ===========================================
> == Neuer Eintrag
> ===========================================
>
>
> -------------------------------------------
> -- Formular: 'adddev'
> -------------------------------------------
>
> 1. Your email address:
> 'alistair at penguinmail.com'
> 2. Manufacturer (e.g. "Mustek"):
> 'Hewlett Packard'
> 3. Model name (e.g. ScanExpress 1200UB):
> 'scanjet 4470c'
> 4. Bus type:
> 'USB'
> 5. Vendor id (e.g. 0x001):
> ' Vendor=03f0 '
> 6. Product id (e.g. 0x0002):
> 'ProdID=0805 Rev= 1.00'
> 7. Chipset (e.g. lm9831):
> ''
> 8. Comments (e.g. similar to Mustek 1234):
> 'xsane will recognise scanner and seem to perform preview scan, normal
> scan and so on, but the output is just a black page.
>
> I am using Ubuntu Gutsy Gibbon updated to today's version (27.01.2008).
> Xsane is version 0.991.
>
> When I try and set configurations in xsane I get "permission denied" types
> of messages. This happens actually even when I just close xsane.' 9. Data
> (e.g. sane-find-scanner -v -v):
> '$ scanimage -L
> device `hp_rts88xx:libusb:002:004' is a Hewlett-Packard ScanJet 4470C
> flatbed scanner
>
> $cat /proc/bus/usb/devices
>
> T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
> B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 2.06
> S: Manufacturer=Linux 2.6.22-14-generic ehci_hcd
> S: Product=EHCI Host Controller
> S: SerialNumber=0000:00:1d.7
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
> I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
>
> T: Bus=05 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
> D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=0d7d ProdID=1600 Rev= 1.00
> S: Manufacturer=Acer
> S: Product=Flash Disk
> S: SerialNumber=48541D000264
> C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
> E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
>
> T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 2.06
> S: Manufacturer=Linux 2.6.22-14-generic uhci_hcd
> S: Product=UHCI Host Controller
> S: SerialNumber=0000:00:1d.3
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
> I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
>
> T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 2.06
> S: Manufacturer=Linux 2.6.22-14-generic uhci_hcd
> S: Product=UHCI Host Controller
> S: SerialNumber=0000:00:1d.2
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
> I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
>
> T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 2.06
> S: Manufacturer=Linux 2.6.22-14-generic uhci_hcd
> S: Product=UHCI Host Controller
> S: SerialNumber=0000:00:1d.1
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
> I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
>
> T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=03f0 ProdID=0805 Rev= 1.00
> S: Manufacturer=Hewlett-Packard
> S: Product=HP ScanJet 4470c
> S: SerialNumber=CN24GAD059Z
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
> E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms
> E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=250ms
>
> T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
> D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=043d ProdID=0078 Rev= 1.00
> S: Manufacturer=Lexmark
> S: Product=Lexmark Z600 Series
> S: SerialNumber=18K670127073950
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 4mA
> I:* If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
> E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=81(I) Atr=02(Bulk) MxPS= 16 Ivl=0ms
>
> T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 2.06
> S: Manufacturer=Linux 2.6.22-14-generic uhci_hcd
> S: Product=UHCI Host Controller
> S: SerialNumber=0000:00:1d.0
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
> I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
>
> $ sudo sane-find-scanner -v -v
> This is sane-find-scanner from sane-backends 1.0.18-cvs
>
> # sane-find-scanner will now attempt to detect your scanner. If the
> # result is different from what you expected, first make sure your
> # scanner is powered up and properly connected to your computer.
>
> searching for SCSI scanners:
> checking /dev/scanner... failed to open (Invalid argument)
> checking /dev/sg0... failed to open (Invalid argument)
> checking /dev/sg1... failed to open (Invalid argument)
> checking /dev/sg2... failed to open (Invalid argument)
> checking /dev/sg3... failed to open (Invalid argument)
> checking /dev/sg4... failed to open (Invalid argument)
> checking /dev/sg5... failed to open (Invalid argument)
> checking /dev/sg6... failed to open (Invalid argument)
> checking /dev/sg7... failed to open (Invalid argument)
> checking /dev/sg8... failed to open (Invalid argument)
> checking /dev/sg9... failed to open (Invalid argument)
> checking /dev/sga... failed to open (Invalid argument)
> checking /dev/sgb... failed to open (Invalid argument)
> checking /dev/sgc... failed to open (Invalid argument)
> checking /dev/sgd... failed to open (Invalid argument)
> checking /dev/sge... failed to open (Invalid argument)
> checking /dev/sgf... failed to open (Invalid argument)
> checking /dev/sgg... failed to open (Invalid argument)
> checking /dev/sgh... failed to open (Invalid argument)
> checking /dev/sgi... failed to open (Invalid argument)
> checking /dev/sgj... failed to open (Invalid argument)
> checking /dev/sgk... failed to open (Invalid argument)
> checking /dev/sgl... failed to open (Invalid argument)
> checking /dev/sgm... failed to open (Invalid argument)
> checking /dev/sgn... failed to open (Invalid argument)
> checking /dev/sgo... failed to open (Invalid argument)
> checking /dev/sgp... failed to open (Invalid argument)
> checking /dev/sgq... failed to open (Invalid argument)
> checking /dev/sgr... failed to open (Invalid argument)
> checking /dev/sgs... failed to open (Invalid argument)
> checking /dev/sgt... failed to open (Invalid argument)
> checking /dev/sgu... failed to open (Invalid argument)
> checking /dev/sgv... failed to open (Invalid argument)
> checking /dev/sgw... failed to open (Invalid argument)
> checking /dev/sgx... failed to open (Invalid argument)
> checking /dev/sgy... failed to open (Invalid argument)
> checking /dev/sgz... failed to open (Invalid argument)
> # No SCSI scanners found. If you expected something different, make sure
> that # you have loaded a kernel SCSI driver for your SCSI adapter.
>
> searching for USB scanners:
> checking /dev/usb/scanner... failed to open (Invalid argument)
> checking /dev/usb/scanner0... failed to open (Invalid argument)
> checking /dev/usb/scanner1... failed to open (Invalid argument)
> checking /dev/usb/scanner2... failed to open (Invalid argument)
> checking /dev/usb/scanner3... failed to open (Invalid argument)
> checking /dev/usb/scanner4... failed to open (Invalid argument)
> checking /dev/usb/scanner5... failed to open (Invalid argument)
> checking /dev/usb/scanner5... failed to open (Invalid argument)
> checking /dev/usb/scanner7... failed to open (Invalid argument)
> checking /dev/usb/scanner8... failed to open (Invalid argument)
> checking /dev/usb/scanner9... failed to open (Invalid argument)
> checking /dev/usb/scanner10... failed to open (Invalid argument)
> checking /dev/usb/scanner11... failed to open (Invalid argument)
> checking /dev/usb/scanner12... failed to open (Invalid argument)
> checking /dev/usb/scanner13... failed to open (Invalid argument)
> checking /dev/usb/scanner14... failed to open (Invalid argument)
> checking /dev/usb/scanner15... failed to open (Invalid argument)
> checking /dev/usbscanner... failed to open (Invalid argument)
> checking /dev/usbscanner0... failed to open (Invalid argument)
> checking /dev/usbscanner1... failed to open (Invalid argument)
> checking /dev/usbscanner2... failed to open (Invalid argument)
> checking /dev/usbscanner3... failed to open (Invalid argument)
> checking /dev/usbscanner4... failed to open (Invalid argument)
> checking /dev/usbscanner5... failed to open (Invalid argument)
> checking /dev/usbscanner6... failed to open (Invalid argument)
> checking /dev/usbscanner7... failed to open (Invalid argument)
> checking /dev/usbscanner8... failed to open (Invalid argument)
> checking /dev/usbscanner9... failed to open (Invalid argument)
> checking /dev/usbscanner10... failed to open (Invalid argument)
> checking /dev/usbscanner11... failed to open (Invalid argument)
> checking /dev/usbscanner12... failed to open (Invalid argument)
> checking /dev/usbscanner13... failed to open (Invalid argument)
> checking /dev/usbscanner14... failed to open (Invalid argument)
> checking /dev/usbscanner15... failed to open (Invalid argument)
> trying libusb:
>
> <device descriptor of 0x0d7d/0x1600 at 005:003 (Acer Flash Disk )>
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 0
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x0D7D
> idProduct 0x1600
> bcdDevice 1.00
> iManufacturer 1 (Acer )
> iProduct 2 (Flash Disk )
> iSerialNumber 3 (48541D000264)
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 39
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0 ()
> bmAttributes 128 ()
> MaxPower 200 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 3
> bInterfaceClass 8
> bInterfaceSubClass 6
> bInterfaceProtocol 80
> iInterface 0 ()
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 2 (bulk)
> wMaxPacketSize 512
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 1>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 (out 0x02)
> bmAttributes 2 (bulk)
> wMaxPacketSize 512
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 2>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x83 (in 0x03)
> bmAttributes 3 (interrupt)
> wMaxPacketSize 64
> bInterval 4 ms
> bRefresh 0
> bSynchAddress 0
>
> <device descriptor of 0x0000/0x0000 at 005:001 (Linux 2.6.22-14-generic
> ehci_hcd EHCI Host Controller)> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 9
> bDeviceSubClass 0
> bDeviceProtocol 1
> bMaxPacketSize0 64
> idVendor 0x0000
> idProduct 0x0000
> bcdDevice 2.06
> iManufacturer 3 (Linux 2.6.22-14-generic ehci_hcd)
> iProduct 2 (EHCI Host Controller)
> iSerialNumber 1 (0000:00:1d.7)
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0 ()
> bmAttributes 224 (Self-poweredRemote Wakeup)
> MaxPower 0 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0 ()
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 3 (interrupt)
> wMaxPacketSize 4
> bInterval 12 ms
> bRefresh 0
> bSynchAddress 0
>
> <device descriptor of 0x03f0/0x0805 at 002:004>
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 0
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 8
> idVendor 0x03F0
> idProduct 0x0805
> bcdDevice 1.00
> iManufacturer 4 ((null))
> iProduct 3 ((null))
> iSerialNumber 5 ((null))
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 39
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 6 ((null))
> bmAttributes 224 (Self-poweredRemote Wakeup)
> MaxPower 0 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 3
> bInterfaceClass 0
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 7 ((null))
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 2 (bulk)
> wMaxPacketSize 64
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 1>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 (out 0x02)
> bmAttributes 2 (bulk)
> wMaxPacketSize 8
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 2>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x83 (in 0x03)
> bmAttributes 3 (interrupt)
> wMaxPacketSize 1
> bInterval 250 ms
> bRefresh 0
> bSynchAddress 0
>
> <trying to find out which USB chip is used>
> checking for GT-6801 ...
> this is not a GT-6801 (bDeviceClass = 0)
> checking for GT-6816 ...
> this is not a GT-6816 (bDeviceClass = 0, bInterfaceClass = 0)
> checking for GT-8911 ...
> this is not a GT-8911 (check 1, bDeviceClass = 0, bInterfaceClass = 0)
> checking for MA-1017 ...
> this is not a MA-1017 (bcdUSB = 0x110)
> checking for MA-1015 ...
> this is not a MA-1015 (bDeviceClass = 0)
> checking for MA-1509 ...
> this is not a MA-1509 (bDeviceClass = 0)
> checking for LM983[1,2,3] ...
> this is not a LM983x (bDeviceClass = 0, bInterfaceClass = 0)
> checking for GL646 ...
> this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 0)
> checking for GL646_HP ...
> this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 0)
> checking for GL660+GL646 ...
> this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 0)
> checking for GL841 ...
> this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 0)
> checking for ICM532B ...
> this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 0)
> checking for PV8630/LM9830 ...
> this is not a PV8630/LM9830 (bcdUSB = 0x110)
> checking for M011 ...
> this is not a M011 (bDeviceClass = 0)
> checking for RTS8822L-01H ...
> this is not a RTS8822L-01H (bEndpointAddress = 0x81, bmAttributes =
> 0x2, wMaxPacketSize = 0x40, bInterval = 0x0) checking for rts8858c ...
> Unexpected result from register reading (0x20/0xf8)
> checking for SQ113 ...
> this is not a SQ113 (bcdUSB = 0x110)
> checking for HP5550/5590/7650 chipset ...
> this is not a HP5550/5590/7650 chipset (bDeviceClass = 0)
> <Couldn't determine the type of the USB chip (result from sane-backends
> 1.0.18-cvs)>
>
> found USB scanner (vendor=0x03f0, product=0x0805) at libusb:002:004
>
> <device descriptor of 0x043d/0x0078 at 002:003 (Lexmark Lexmark Z600
> Series)> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 0
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 8
> idVendor 0x043D
> idProduct 0x0078
> bcdDevice 1.00
> iManufacturer 1 (Lexmark )
> iProduct 2 (Lexmark Z600 Series)
> iSerialNumber 3 (18K670127073950)
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 32
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0 ()
> bmAttributes 192 (Self-powered)
> MaxPower 4 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 7
> bInterfaceSubClass 1
> bInterfaceProtocol 2
> iInterface 0 ()
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x05 (out 0x05)
> bmAttributes 2 (bulk)
> wMaxPacketSize 64
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 1>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 2 (bulk)
> wMaxPacketSize 16
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
>
> <device descriptor of 0x0000/0x0000 at 002:001 (Linux 2.6.22-14-generic
> uhci_hcd UHCI Host Controller)> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 9
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x0000
> idProduct 0x0000
> bcdDevice 2.06
> iManufacturer 3 (Linux 2.6.22-14-generic uhci_hcd)
> iProduct 2 (UHCI Host Controller)
> iSerialNumber 1 (0000:00:1d.1)
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0 ()
> bmAttributes 224 (Self-poweredRemote Wakeup)
> MaxPower 0 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0 ()
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 3 (interrupt)
> wMaxPacketSize 2
> bInterval 255 ms
> bRefresh 0
> bSynchAddress 0
>
> <device descriptor of 0x0000/0x0000 at 001:001 (Linux 2.6.22-14-generic
> uhci_hcd UHCI Host Controller)> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 9
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x0000
> idProduct 0x0000
> bcdDevice 2.06
> iManufacturer 3 (Linux 2.6.22-14-generic uhci_hcd)
> iProduct 2 (UHCI Host Controller)
> iSerialNumber 1 (0000:00:1d.0)
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0 ()
> bmAttributes 224 (Self-poweredRemote Wakeup)
> MaxPower 0 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0 ()
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 3 (interrupt)
> wMaxPacketSize 2
> bInterval 255 ms
> bRefresh 0
> bSynchAddress 0
>
> <device descriptor of 0x0000/0x0000 at 003:001 (Linux 2.6.22-14-generic
> uhci_hcd UHCI Host Controller)> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 9
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x0000
> idProduct 0x0000
> bcdDevice 2.06
> iManufacturer 3 (Linux 2.6.22-14-generic uhci_hcd)
> iProduct 2 (UHCI Host Controller)
> iSerialNumber 1 (0000:00:1d.2)
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0 ()
> bmAttributes 224 (Self-poweredRemote Wakeup)
> MaxPower 0 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0 ()
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 3 (interrupt)
> wMaxPacketSize 2
> bInterval 255 ms
> bRefresh 0
> bSynchAddress 0
>
> <device descriptor of 0x0000/0x0000 at 004:001 (Linux 2.6.22-14-generic
> uhci_hcd UHCI Host Controller)> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 9
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x0000
> idProduct 0x0000
> bcdDevice 2.06
> iManufacturer 3 (Linux 2.6.22-14-generic uhci_hcd)
> iProduct 2 (UHCI Host Controller)
> iSerialNumber 1 (0000:00:1d.3)
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0 ()
> bmAttributes 224 (Self-poweredRemote Wakeup)
> MaxPower 0 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0 ()
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 3 (interrupt)
> wMaxPacketSize 2
> bInterval 255 ms
> bRefresh 0
> bSynchAddress 0
> # Your USB scanner was (probably) detected. It may or may not be
> supported by # SANE. Try scanimage -L and read the backend's manpage.
>
> # Not checking for parallel port scanners.
>
> # Most Scanners connected to the parallel port or other proprietary ports
> # can't be detected by this program.
> done
>
> '
Hello,
you may give the rts8891 backend a try. You can get the experimental version
at:
http://stef.dev.free.fr/sane/rts8891/index.html
Regards,
Stef
More information about the sane-devel
mailing list