[sane-devel] SANE Support for Canon TS9520 printer

[thierry at ordissimo.com]

Le 2018-12-20 15:48, thierry at ordissimo.com a écrit :
> Le 2018-12-20 15:20, Paul Bixel a écrit :
>> Thanks for the support.
>> 
>> I had already installed scangearmp2 from the Canon site via their
>> debian package.  That was working per my below email.
>> 
>> Per your email I uninstalled that Canon package, added your PPA and
>> installed scangearmp2 via Synaptic.
>> 
>> The result is now sangearmp2 pops a dialog with the message "Internal
>> Error occurred. Scanner driver will be closed."
>> 
> Thank you, error reproduced, I correct.

Corrected and tested

>> Paul
>> 
>> 
>> On 12/20/18 8:24 AM, thierry at ordissimo.com wrote:
>>> Le 2018-12-20 13:03, Rolf Bensch a écrit :
>>>> Hi Paul,
>>>> 
>>>> I just added your scanner to SANE. It's available in git now. For 
>>>> other
>>>> download channels you must wait until tomorrow.
>>>> 
>>>> Please check if everything is working. For these kind of scanners 
>>>> SANE
>>>> has problems with Ethernet and WiFi, so only USB might work.
>>> 
>>> Hi,
>>> For wifi, I just updated:
>>> https://github.com/Ordissimo/scangearmp2
>>> and
>>> https://launchpad.net/~thierry-f/+archive/ubuntu/fork-michael-gruz
>>>> 
>>>> Hope this helps.
>>>> 
>>>> Cheers,
>>>> Rolf
>>>> 
>>>> 
>>>> Am 18.12.18 um 19:40 schrieb Paul Bixel:
>>>>> Hi Folks,
>>>>> 
>>>>> New to your group.  Recently bought a Canon TS9520 Multi-Function
>>>>> printer and was looking to get it working with my Linux system.
>>>>> Reviewing your website it seems this is an untested model and that
>>>>> testers are needed.  So here I am.
>>>>> 
>>>>> The printer:
>>>>> 
>>>>> https://www.usa.canon.com/internet/portal/us/home/products/details/printers/inkjet-multifunction/ts-series-inkjet/pixma-ts9520 
>>>>> My system:
>>>>> 
>>>>> RELEASE=18.2
>>>>> CODENAME=sonya
>>>>> EDITION="Cinnamon 64-bit"
>>>>> DESCRIPTION="Linux Mint 18.2 Sonya"
>>>>> DESKTOP=Gnome
>>>>> TOOLKIT=GTK
>>>>> NEW_FEATURES_URL=http://www.linuxmint.com/rel_sonya_cinnamon_whatsnew.php 
>>>>> RELEASE_NOTES_URL=http://www.linuxmint.com/rel_sonya_cinnamon.php
>>>>> USER_GUIDE_URL=help:linuxmint
>>>>> GRUB_TITLE=Linux Mint 18.2 Cinnamon 64-bit
>>>>> 
>>>>> 
>>>>> Things I have observed:
>>>>> 
>>>>> I tried with both SANE v1.0.14 which came with the distro and I 
>>>>> also
>>>>> downloaded, built and installed v1.0.27 from the site without any
>>>>> change in behavior.
>>>>> 
>>>>> I have tried both the USB and Wifi interfaces of this printer 
>>>>> without
>>>>> success.
>>>>> 
>>>>> 
>>>>> Results of sane-find-scanner shown below with USB (and Wifi 
>>>>> connected).
>>>>> 
>>>>> ============================
>>>>> 
>>>>> sane-find-scanner
>>>>> 
>>>>>   # sane-find-scanner will now attempt to detect your scanner. If 
>>>>> the
>>>>>   # result is different from what you expected, first make sure 
>>>>> your
>>>>>   # scanner is powered up and properly connected to your computer.
>>>>> 
>>>>>   # No SCSI scanners found. If you expected something different, 
>>>>> make
>>>>> sure that
>>>>>   # you have loaded a kernel SCSI driver for your SCSI adapter.
>>>>> 
>>>>> found USB scanner (vendor=0x04a9 [Canon], product=0x185c [TS9500
>>>>> series]) at libusb:001:008
>>>>> found USB scanner (vendor=0x0fe6, product=0x9700 [USB 2.0 10/100M
>>>>> Ethernet Adaptor]) at libusb:001:006
>>>>>   # Your USB scanner was (probably) detected. It may or may not be
>>>>> supported by
>>>>>   # SANE. Try scanimage -L and read the backend's manpage.
>>>>> 
>>>>>   # Not checking for parallel port scanners.
>>>>> 
>>>>>   # Most Scanners connected to the parallel port or other 
>>>>> proprietary
>>>>> ports
>>>>>   # can't be detected by this program.
>>>>> 
>>>>> =============================
>>>>> 
>>>>> scanimage -L does not detect anything.
>>>>> 
>>>>> With Wireshark I can see that there is no response to the subnet
>>>>> broadcast to port 8612 discover packet when running scanimage.
>>>>> 
>>>>> 
>>>>> I have installed Canon's tool called ScanGearMP2 and it functions 
>>>>> over
>>>>> Wifi with this printer.  Attached is the discovery sequence that I
>>>>> captured that shows how the Canon tools discoveres the printer.
>>>>> 
>>>>> If there is anything else I can investigate for you let me know. I
>>>>> would love to see this printer move to the "Known to work column" 
>>>>> of
>>>>> your site.
>>>>> 
>>>>> 
>>>>> Best Regards,
>>>>> 
>>>>> Paul Bixel
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>