[sane-devel] Problem with Sane over network

[Luca Bertoncello]

Am 12.04.2020 um 18:54 schrieb Jörn-Ingo Weigert:
> Actually, until you don't forward/ route the packets from one network to
> the other and vice versa, your PC will not function, until either you
> assign a second ip-adress of the other network to either the RasPI or
> the PC.

As I already sayd, I tried with both devices in the same network, too.
Unfortunately it already does NOT work...

> And no, it is not sufficient to just allow in the firewall to let pass
> the packets, the devices had to be setup properly (second IP + (DNS/
> etc/hosts if needed, too))

What should an entry in the DNS help in this case?!?

Regards
Luca Bertoncello
(lucabert at lucabert.de)