[sane-devel] Using "scanimage" under Gentoo
Dr Rainer Woitok
rainer.woitok at gmail.com
Fri Feb 7 17:42:58 GMT 2020
Olaf,
this is my second try to answer your mail because the first was held due
to being more than 100 kB in size, and I then cancelled it.
On Wednesday, 2020-02-05 18:47:14 +0900, Olaf Meeuwissen wrote:
> ...
> So, if HAVE_LIBJPEG is not defined (check include/sane/config.h), that
> compiled sanei_jpeg.lo is basically empty.
>
> Assuming it is not defined ...
It is:
$ grep -i jpeg include/sane/config.h
/* Define to 1 if you have the libjpeg library. */
#define HAVE_LIBJPEG 1
$
> ...
> Can you re-run `configure` and provide the
> `config.status` and `config.log` files?
I've appended file "config.status" below. However, file "config.log" is
about 300+ kB in size and thus would be quarantained again. Is it ok to
mail it only to you privately?
Sincerely,
Rainer
------------------------ File "config.status": -------------------------
#! /bin/sh
# Generated by configure.
# Run this file to recreate the current configuration.
# Compiler output produced by configure, useful for debugging
# configure, is in config.log if it exists.
debug=false
ac_cs_recheck=false
ac_cs_silent=false
SHELL=${CONFIG_SHELL-/bin/sh}
export SHELL
## -------------------- ##
## M4sh Initialization. ##
## -------------------- ##
# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
NULLCMD=:
# Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
case `(set -o) 2>/dev/null` in #(
*posix*) :
set -o posix ;; #(
*) :
;;
esac
fi
as_nl='
'
export as_nl
# Printing a long string crashes Solaris 7 /usr/bin/printf.
as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
# Prefer a ksh shell builtin over an external printf program on Solaris,
# but without wasting forks for bash or zsh.
if test -z "$BASH_VERSION$ZSH_VERSION" \
&& (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
as_echo='print -r --'
as_echo_n='print -rn --'
elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
as_echo='printf %s\n'
as_echo_n='printf %s'
else
if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
as_echo_n='/usr/ucb/echo -n'
else
as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
as_echo_n_body='eval
arg=$1;
case $arg in #(
*"$as_nl"*)
expr "X$arg" : "X\\(.*\\)$as_nl";
arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
esac;
expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
'
export as_echo_n_body
as_echo_n='sh -c $as_echo_n_body as_echo'
fi
export as_echo_body
as_echo='sh -c $as_echo_body as_echo'
fi
# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
PATH_SEPARATOR=:
(PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
(PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
PATH_SEPARATOR=';'
}
fi
# IFS
# We need space, tab and new line, in precisely that order. Quoting is
# there to prevent editors from complaining about space-tab.
# (If _AS_PATH_WALK were called with IFS unset, it would disable word
# splitting by setting IFS to empty value.)
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
as_myself=
case $0 in #((
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
done
IFS=$as_save_IFS
;;
esac
# We did not find ourselves, most probably we were run as `sh COMMAND'
# in which case we are not to be found in the path.
if test "x$as_myself" = x; then
as_myself=$0
fi
if test ! -f "$as_myself"; then
$as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
exit 1
fi
# Unset variables that we do not need and which cause bugs (e.g. in
# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
# suppresses any "Segmentation fault" message there. '((' could
# trigger a bug in pdksh 5.2.14.
for as_var in BASH_ENV ENV MAIL MAILPATH
do eval test x\${$as_var+set} = xset \
&& ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
done
PS1='$ '
PS2='> '
PS4='+ '
# NLS nuisances.
LC_ALL=C
export LC_ALL
LANGUAGE=C
export LANGUAGE
# CDPATH.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
# as_fn_error STATUS ERROR [LINENO LOG_FD]
# ----------------------------------------
# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
# script with STATUS, using 1 if that was 0.
as_fn_error ()
{
as_status=$1; test $as_status -eq 0 && as_status=1
if test "$4"; then
as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
$as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
fi
$as_echo "$as_me: error: $2" >&2
as_fn_exit $as_status
} # as_fn_error
# as_fn_set_status STATUS
# -----------------------
# Set $? to STATUS, without forking.
as_fn_set_status ()
{
return $1
} # as_fn_set_status
# as_fn_exit STATUS
# -----------------
# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
as_fn_exit ()
{
set +e
as_fn_set_status $1
exit $1
} # as_fn_exit
# as_fn_unset VAR
# ---------------
# Portably unset VAR.
as_fn_unset ()
{
{ eval $1=; unset $1;}
}
as_unset=as_fn_unset
# as_fn_append VAR VALUE
# ----------------------
# Append the text in VALUE to the end of the definition contained in VAR. Take
# advantage of any shell optimizations that allow amortized linear growth over
# repeated appends, instead of the typical quadratic growth present in naive
# implementations.
if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
eval 'as_fn_append ()
{
eval $1+=\$2
}'
else
as_fn_append ()
{
eval $1=\$$1\$2
}
fi # as_fn_append
# as_fn_arith ARG...
# ------------------
# Perform arithmetic evaluation on the ARGs, and store the result in the
# global $as_val. Take advantage of shells that can avoid forks. The arguments
# must be portable across $(()) and expr.
if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
eval 'as_fn_arith ()
{
as_val=$(( $* ))
}'
else
as_fn_arith ()
{
as_val=`expr "$@" || test $? -eq 1`
}
fi # as_fn_arith
if expr a : '\(a\)' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
as_basename=basename
else
as_basename=false
fi
if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
as_dirname=dirname
else
as_dirname=false
fi
as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
X"$0" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X/"$0" |
sed '/^.*\/\([^/][^/]*\)\/*$/{
s//\1/
q
}
/^X\/\(\/\/\)$/{
s//\1/
q
}
/^X\/\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits
ECHO_C= ECHO_N= ECHO_T=
case `echo -n x` in #(((((
-n*)
case `echo 'xy\c'` in
*c*) ECHO_T=' ';; # ECHO_T is single tab character.
xy) ECHO_C='\c';;
*) echo `echo ksh88 bug on AIX 6.1` > /dev/null
ECHO_T=' ';;
esac;;
*)
ECHO_N='-n';;
esac
rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
rm -f conf$$.dir/conf$$.file
else
rm -f conf$$.dir
mkdir conf$$.dir 2>/dev/null
fi
if (echo >conf$$.file) 2>/dev/null; then
if ln -s conf$$.file conf$$ 2>/dev/null; then
as_ln_s='ln -s'
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
# In both cases, we have to default to `cp -pR'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
as_ln_s='cp -pR'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
as_ln_s='cp -pR'
fi
else
as_ln_s='cp -pR'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
# as_fn_mkdir_p
# -------------
# Create "$as_dir" as a directory, including parents if necessary.
as_fn_mkdir_p ()
{
case $as_dir in #(
-*) as_dir=./$as_dir;;
esac
test -d "$as_dir" || eval $as_mkdir_p || {
as_dirs=
while :; do
case $as_dir in #(
*\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
*) as_qdir=$as_dir;;
esac
as_dirs="'$as_qdir' $as_dirs"
as_dir=`$as_dirname -- "$as_dir" ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
test -d "$as_dir" && break
done
test -z "$as_dirs" || eval "mkdir $as_dirs"
} || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
} # as_fn_mkdir_p
if mkdir -p . 2>/dev/null; then
as_mkdir_p='mkdir -p "$as_dir"'
else
test -d ./-p && rmdir ./-p
as_mkdir_p=false
fi
# as_fn_executable_p FILE
# -----------------------
# Test if FILE is an executable regular file.
as_fn_executable_p ()
{
test -f "$1" && test -x "$1"
} # as_fn_executable_p
as_test_x='test -x'
as_executable_p=as_fn_executable_p
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
exec 6>&1
## ----------------------------------- ##
## Main body of $CONFIG_STATUS script. ##
## ----------------------------------- ##
# Save the log message, to keep $0 and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
This file was extended by sane-backends $as_me 1.0.29+72-dirty, which was
generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
CONFIG_LINKS = $CONFIG_LINKS
CONFIG_COMMANDS = $CONFIG_COMMANDS
$ $0 $@
on `(hostname || uname -n) 2>/dev/null | sed 1q`
"
# Files that config.status was made for.
config_files=" Makefile lib/Makefile sanei/Makefile frontend/Makefile japi/Makefile backend/Makefile include/Makefile doc/Makefile po/Makefile.in testsuite/Makefile testsuite/backend/Makefile testsuite/backend/genesys/Makefile testsuite/sanei/Makefile testsuite/tools/Makefile tools/Makefile doc/doxygen-sanei.conf doc/doxygen-genesys.conf tools/sane-config tools/sane-backends.pc"
config_headers=" include/sane/config.h"
config_commands=" depfiles libtool po-directories include/_stdint.h"
ac_cs_usage="\
\`$as_me' instantiates files and other configuration actions
from templates according to the current configuration. Unless the files
and actions are specified as TAGs, all are instantiated by default.
Usage: $0 [OPTION]... [TAG]...
-h, --help print this help, then exit
-V, --version print version number and configuration settings, then exit
--config print configuration, then exit
-q, --quiet, --silent
do not print progress messages
-d, --debug don't remove temporary files
--recheck update $as_me by reconfiguring in the same conditions
--file=FILE[:TEMPLATE]
instantiate the configuration file FILE
--header=FILE[:TEMPLATE]
instantiate the configuration header FILE
Configuration files:
$config_files
Configuration headers:
$config_headers
Configuration commands:
$config_commands
Report bugs to <sane-devel at alioth-lists.debian.net>."
ac_cs_config="'--bindir=/home/rainer/bin' '--datadir=/home/rainer/share' '--datarootdir=/home/rainer/share' '--docdir=/home/rainer/doc/sane-backends' '--includedir=/home/rainer/include' '--libdir=/home/rainer/lib' '--libexecdir=/home/rainer/libexec' '--localstatedir=/home/rainer/var' '--mandir=/home/rainer/man' '--prefix=/home/rainer' '--sbindir=/home/rainer/bin' '--sharedstatedir=/home/rainer/com' '--sysconfdir=/home/rainer/etc' '--disable-avahi' '--disable-dynamic' '--disable-nls' '--enable-ipv6' '--enable-preload' '--enable-shared' '--with-usb' '--without-gphoto2' '--without-snmp' '--without-systemd' '--without-v4l' 'BACKENDS=pixma'"
ac_cs_version="\
sane-backends config.status 1.0.29+72-dirty
configured by ./configure, generated by GNU Autoconf 2.69,
with options \"$ac_cs_config\"
Copyright (C) 2012 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
ac_pwd='/home/rainer/repo/sane-backends'
srcdir='.'
INSTALL='/usr/bin/install -c'
MKDIR_P='/bin/mkdir -p'
AWK='gawk'
test -n "$AWK" || AWK=awk
# The default lists apply if the user does not specify any file.
ac_need_defaults=:
while test $# != 0
do
case $1 in
--*=?*)
ac_option=`expr "X$1" : 'X\([^=]*\)='`
ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
ac_shift=:
;;
--*=)
ac_option=`expr "X$1" : 'X\([^=]*\)='`
ac_optarg=
ac_shift=:
;;
*)
ac_option=$1
ac_optarg=$2
ac_shift=shift
;;
esac
case $ac_option in
# Handling of the options.
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
ac_cs_recheck=: ;;
--version | --versio | --versi | --vers | --ver | --ve | --v | -V )
$as_echo "$ac_cs_version"; exit ;;
--config | --confi | --conf | --con | --co | --c )
$as_echo "$ac_cs_config"; exit ;;
--debug | --debu | --deb | --de | --d | -d )
debug=: ;;
--file | --fil | --fi | --f )
$ac_shift
case $ac_optarg in
*\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
'') as_fn_error $? "missing file argument" ;;
esac
as_fn_append CONFIG_FILES " '$ac_optarg'"
ac_need_defaults=false;;
--header | --heade | --head | --hea )
$ac_shift
case $ac_optarg in
*\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
as_fn_append CONFIG_HEADERS " '$ac_optarg'"
ac_need_defaults=false;;
--he | --h)
# Conflict between --help and --header
as_fn_error $? "ambiguous option: \`$1'
Try \`$0 --help' for more information.";;
--help | --hel | -h )
$as_echo "$ac_cs_usage"; exit ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil | --si | --s)
ac_cs_silent=: ;;
# This is an error.
-*) as_fn_error $? "unrecognized option: \`$1'
Try \`$0 --help' for more information." ;;
*) as_fn_append ac_config_targets " $1"
ac_need_defaults=false ;;
esac
shift
done
ac_configure_extra_args=
if $ac_cs_silent; then
exec 6>/dev/null
ac_configure_extra_args="$ac_configure_extra_args --silent"
fi
if $ac_cs_recheck; then
set X /bin/sh './configure' '--bindir=/home/rainer/bin' '--datadir=/home/rainer/share' '--datarootdir=/home/rainer/share' '--docdir=/home/rainer/doc/sane-backends' '--includedir=/home/rainer/include' '--libdir=/home/rainer/lib' '--libexecdir=/home/rainer/libexec' '--localstatedir=/home/rainer/var' '--mandir=/home/rainer/man' '--prefix=/home/rainer' '--sbindir=/home/rainer/bin' '--sharedstatedir=/home/rainer/com' '--sysconfdir=/home/rainer/etc' '--disable-avahi' '--disable-dynamic' '--disable-nls' '--enable-ipv6' '--enable-preload' '--enable-shared' '--with-usb' '--without-gphoto2' '--without-snmp' '--without-systemd' '--without-v4l' 'BACKENDS=pixma' $ac_configure_extra_args --no-create --no-recursion
shift
$as_echo "running CONFIG_SHELL=/bin/sh $*" >&6
CONFIG_SHELL='/bin/sh'
export CONFIG_SHELL
exec "$@"
fi
exec 5>>config.log
{
echo
sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
## Running $as_me. ##
_ASBOX
$as_echo "$ac_log"
} >&5
#
# INIT-COMMANDS
#
AMDEP_TRUE="" MAKE="make"
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
double_quote_subst='s/\(["`\\]\)/\\\1/g'
delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
macro_version='2.4.6'
macro_revision='2.4.6'
enable_static='no'
AS='as'
DLLTOOL='false'
OBJDUMP='objdump'
enable_shared='yes'
pic_mode='default'
enable_fast_install='needless'
shared_archive_member_spec=''
SHELL='/bin/sh'
ECHO='printf %s\n'
PATH_SEPARATOR=':'
host_alias=''
host='x86_64-pc-linux-gnu'
host_os='linux-gnu'
build_alias=''
build='x86_64-pc-linux-gnu'
build_os='linux-gnu'
SED='/bin/sed'
Xsed='/bin/sed -e 1s/^X//'
GREP='/bin/grep'
EGREP='/bin/grep -E'
FGREP='/bin/grep -F'
LD='/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64'
NM='/usr/bin/nm -B'
LN_S='ln -s'
max_cmd_len='1572864'
ac_objext='o'
exeext=''
lt_unset='unset'
lt_SP2NL='tr \040 \012'
lt_NL2SP='tr \015\012 \040\040'
lt_cv_to_host_file_cmd='func_convert_file_noop'
lt_cv_to_tool_file_cmd='func_convert_file_noop'
reload_flag=' -r'
reload_cmds='$LD$reload_flag -o $output$reload_objs'
deplibs_check_method='pass_all'
file_magic_cmd='$MAGIC_CMD'
file_magic_glob=''
want_nocaseglob='no'
sharedlib_from_linklib_cmd='printf %s\n'
AR='ar'
AR_FLAGS='cru'
archiver_list_spec='@'
STRIP='strip'
RANLIB='ranlib'
old_postinstall_cmds='chmod 644 $oldlib~$RANLIB $tool_oldlib'
old_postuninstall_cmds=''
old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs~$RANLIB $tool_oldlib'
lock_old_archive_extraction='no'
CC='gcc'
CFLAGS='-g -O2'
compiler='g++'
GCC='yes'
lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\'' | sed '\''/ __gnu_lto/d'\'''
lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* \(.*\)$/extern int \1();/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/extern char \1;/p'\'''
lt_cv_sys_global_symbol_to_import=''
lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \(.*\) .*$/ {"\1", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/ {"\1", (void *) \&\1},/p'\'''
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: \(.*\) .*$/ {"\1", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(lib.*\)$/ {"\1", (void *) \&\1},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/ {"lib\1", (void *) \&\1},/p'\'''
lt_cv_nm_interface='BSD nm'
nm_file_list_spec='@'
lt_sysroot=''
lt_cv_truncate_bin='/bin/dd bs=4096 count=1'
objdir='.libs'
MAGIC_CMD='file'
lt_prog_compiler_no_builtin_flag=' -fno-builtin'
lt_prog_compiler_pic=' -fPIC -DPIC'
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_static='-static'
lt_cv_prog_compiler_c_o='yes'
need_locks='no'
MANIFEST_TOOL=':'
DSYMUTIL=''
NMEDIT=''
LIPO=''
OTOOL=''
OTOOL64=''
libext='a'
shrext_cmds='.so'
extract_expsyms_cmds=''
archive_cmds_need_lc='no'
enable_shared_with_static_runtimes='no'
export_dynamic_flag_spec='$wl--export-dynamic'
whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive'
compiler_needs_object='no'
old_archive_from_new_cmds=''
old_archive_from_expsyms_cmds=''
archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
echo "local: *; };" >> $output_objdir/$libname.ver~
$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
module_cmds=''
module_expsym_cmds=''
with_gnu_ld='yes'
allow_undefined_flag=''
no_undefined_flag=''
hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
hardcode_libdir_separator=''
hardcode_direct='no'
hardcode_direct_absolute='no'
hardcode_minus_L='no'
hardcode_shlibpath_var='unsupported'
hardcode_automatic='no'
inherit_rpath='no'
link_all_deplibs='unknown'
always_export_symbols='no'
export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
include_expsyms=''
prelink_cmds=''
postlink_cmds=''
file_list_spec=''
variables_saved_for_relink='PATH LD_LIBRARY_PATH LD_RUN_PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH'
need_lib_prefix='no'
need_version='no'
version_type='linux'
runpath_var='LD_RUN_PATH'
shlibpath_var='LD_LIBRARY_PATH'
shlibpath_overrides_runpath='yes'
libname_spec='lib$name'
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
install_override_mode=''
postinstall_cmds=''
postuninstall_cmds=''
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
finish_eval=''
hardcode_into_libs='yes'
sys_lib_search_path_spec='/usr/lib/gcc/x86_64-pc-linux-gnu/9.2.0 /usr/lib64 /lib64 /usr/x86_64-pc-linux-gnu/lib /usr/lib /lib '
configure_time_dlsearch_path='/lib /usr/lib /usr/lib/gcc/x86_64-pc-linux-gnu/9.2.0/32 /usr/lib/gcc/x86_64-pc-linux-gnu/9.2.0 /usr/lib/llvm/9/lib64 /lib64 /usr/lib64 /usr/local/lib64 /lib /usr/lib /usr/local/lib '
configure_time_lt_sys_library_path=''
hardcode_action='immediate'
enable_dlopen='unknown'
enable_dlopen_self='unknown'
enable_dlopen_self_static='unknown'
old_striplib='strip --strip-debug'
striplib='strip --strip-unneeded'
compiler_lib_search_dirs=''
predep_objects=''
postdep_objects=''
predeps=''
postdeps=''
compiler_lib_search_path=''
LD_CXX='/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64'
reload_flag_CXX=' -r'
reload_cmds_CXX='$LD$reload_flag -o $output$reload_objs'
old_archive_cmds_CXX='$AR $AR_FLAGS $oldlib$oldobjs~$RANLIB $tool_oldlib'
compiler_CXX='g++'
GCC_CXX='yes'
lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
lt_prog_compiler_pic_CXX=' -fPIC -DPIC'
lt_prog_compiler_wl_CXX='-Wl,'
lt_prog_compiler_static_CXX='-static'
lt_cv_prog_compiler_c_o_CXX='yes'
archive_cmds_need_lc_CXX='no'
enable_shared_with_static_runtimes_CXX='no'
export_dynamic_flag_spec_CXX='$wl--export-dynamic'
whole_archive_flag_spec_CXX='$wl--whole-archive$convenience $wl--no-whole-archive'
compiler_needs_object_CXX='no'
old_archive_from_new_cmds_CXX=''
old_archive_from_expsyms_cmds_CXX=''
archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
module_cmds_CXX=''
module_expsym_cmds_CXX=''
with_gnu_ld_CXX='yes'
allow_undefined_flag_CXX=''
no_undefined_flag_CXX=''
hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
hardcode_libdir_separator_CXX=''
hardcode_direct_CXX='no'
hardcode_direct_absolute_CXX='no'
hardcode_minus_L_CXX='no'
hardcode_shlibpath_var_CXX='unsupported'
hardcode_automatic_CXX='no'
inherit_rpath_CXX='no'
link_all_deplibs_CXX='unknown'
always_export_symbols_CXX='no'
export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
include_expsyms_CXX=''
prelink_cmds_CXX=''
postlink_cmds_CXX=''
file_list_spec_CXX=''
hardcode_action_CXX='immediate'
compiler_lib_search_dirs_CXX='/usr/lib/gcc/x86_64-pc-linux-gnu/9.2.0 /usr/lib/gcc/x86_64-pc-linux-gnu/9.2.0/../../../../lib64 /lib/../lib64 /usr/lib/../lib64 /usr/lib/gcc/x86_64-pc-linux-gnu/9.2.0/../../../../x86_64-pc-linux-gnu/lib /usr/lib/gcc/x86_64-pc-linux-gnu/9.2.0/../../..'
predep_objects_CXX='/usr/lib/gcc/x86_64-pc-linux-gnu/9.2.0/../../../../lib64/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/9.2.0/crtbeginS.o'
postdep_objects_CXX='/usr/lib/gcc/x86_64-pc-linux-gnu/9.2.0/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/9.2.0/../../../../lib64/crtn.o'
predeps_CXX=''
postdeps_CXX='-lstdc++ -lm -lgcc_s -lc -lgcc_s'
compiler_lib_search_path_CXX='-L/usr/lib/gcc/x86_64-pc-linux-gnu/9.2.0 -L/usr/lib/gcc/x86_64-pc-linux-gnu/9.2.0/../../../../lib64 -L/lib/../lib64 -L/usr/lib/../lib64 -L/usr/lib/gcc/x86_64-pc-linux-gnu/9.2.0/../../../../x86_64-pc-linux-gnu/lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/9.2.0/../../..'
LTCC='gcc'
LTCFLAGS='-g -O2'
compiler='gcc'
# A function that is used when there is no print builtin or printf.
func_fallback_echo ()
{
eval 'cat <<_LTECHO_EOF
$1
_LTECHO_EOF'
}
# Quote evaled strings.
for var in AS DLLTOOL OBJDUMP SHELL ECHO PATH_SEPARATOR SED GREP EGREP FGREP LD NM LN_S lt_SP2NL lt_NL2SP reload_flag deplibs_check_method file_magic_cmd file_magic_glob want_nocaseglob sharedlib_from_linklib_cmd AR AR_FLAGS archiver_list_spec STRIP RANLIB CC CFLAGS compiler lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl lt_cv_sys_global_symbol_to_import lt_cv_sys_global_symbol_to_c_name_address lt_cv_sys_global_symbol_to_c_name_address_lib_prefix lt_cv_nm_interface nm_file_list_spec lt_cv_truncate_bin lt_prog_compiler_no_builtin_flag lt_prog_compiler_pic lt_prog_compiler_wl lt_prog_compiler_static lt_cv_prog_compiler_c_o need_locks MANIFEST_TOOL DSYMUTIL NMEDIT LIPO OTOOL OTOOL64 shrext_cmds export_dynamic_flag_spec whole_archive_flag_spec compiler_needs_object with_gnu_ld allow_undefined_flag no_undefined_flag hardcode_libdir_flag_spec hardcode_libdir_separator exclude_expsyms include_expsyms file_list_spec variables_saved_for_relink libname_spec library_names_spec soname_spec install_override_mode finish_eval old_striplib striplib compiler_lib_search_dirs predep_objects postdep_objects predeps postdeps compiler_lib_search_path LD_CXX reload_flag_CXX compiler_CXX lt_prog_compiler_no_builtin_flag_CXX lt_prog_compiler_pic_CXX lt_prog_compiler_wl_CXX lt_prog_compiler_static_CXX lt_cv_prog_compiler_c_o_CXX export_dynamic_flag_spec_CXX whole_archive_flag_spec_CXX compiler_needs_object_CXX with_gnu_ld_CXX allow_undefined_flag_CXX no_undefined_flag_CXX hardcode_libdir_flag_spec_CXX hardcode_libdir_separator_CXX exclude_expsyms_CXX include_expsyms_CXX file_list_spec_CXX compiler_lib_search_dirs_CXX predep_objects_CXX postdep_objects_CXX predeps_CXX postdeps_CXX compiler_lib_search_path_CXX; do
case `eval \\$ECHO \\""\\$$var"\\"` in
*[\\\`\"\$]*)
eval "lt_$var=\\\"\`\$ECHO \"\$$var\" | \$SED \"\$sed_quote_subst\"\`\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_$var=\\\"\$$var\\\""
;;
esac
done
# Double-quote double-evaled strings.
for var in reload_cmds old_postinstall_cmds old_postuninstall_cmds old_archive_cmds extract_expsyms_cmds old_archive_from_new_cmds old_archive_from_expsyms_cmds archive_cmds archive_expsym_cmds module_cmds module_expsym_cmds export_symbols_cmds prelink_cmds postlink_cmds postinstall_cmds postuninstall_cmds finish_cmds sys_lib_search_path_spec configure_time_dlsearch_path configure_time_lt_sys_library_path reload_cmds_CXX old_archive_cmds_CXX old_archive_from_new_cmds_CXX old_archive_from_expsyms_cmds_CXX archive_cmds_CXX archive_expsym_cmds_CXX module_cmds_CXX module_expsym_cmds_CXX export_symbols_cmds_CXX prelink_cmds_CXX postlink_cmds_CXX; do
case `eval \\$ECHO \\""\\$$var"\\"` in
*[\\\`\"\$]*)
eval "lt_$var=\\\"\`\$ECHO \"\$$var\" | \$SED -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_$var=\\\"\$$var\\\""
;;
esac
done
ac_aux_dir='.'
# See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes INIT.
if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
PACKAGE='sane-backends'
VERSION='1.0.29+72-dirty'
RM='rm -f'
ofile='libtool'
# Capture the value of obsolete ALL_LINGUAS because we need it to compute
# POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it
# from automake < 1.5.
eval 'OBSOLETE_ALL_LINGUAS''=""'
# Capture the value of LINGUAS because we need it to compute CATALOGS.
LINGUAS="%UNSET%"
# variables for create stdint.h replacement
PACKAGE="sane-backends"
VERSION="1.0.29+72-dirty"
ac_stdint_h="include/_stdint.h"
_ac_stdint_h=_SANE_BACKENDS_INCLUDE__STDINT_H
ac_cv_stdint_message="using gnu compiler gcc (Gentoo 9.2.0-r2 p3) 9.2.0"
ac_cv_header_stdint_t="stdint.h"
ac_cv_header_stdint_x=""
ac_cv_header_stdint_o=""
ac_cv_header_stdint_u=""
ac_cv_type_uint64_t=""
ac_cv_type_u_int64_t=""
ac_cv_char_data_model=""
ac_cv_long_data_model=""
ac_cv_type_int_least32_t=""
ac_cv_type_int_fast32_t=""
ac_cv_type_intmax_t=""
# Handling of arguments.
for ac_config_target in $ac_config_targets
do
case $ac_config_target in
"include/sane/config.h") CONFIG_HEADERS="$CONFIG_HEADERS include/sane/config.h" ;;
"depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
"libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
"po-directories") CONFIG_COMMANDS="$CONFIG_COMMANDS po-directories" ;;
"$ac_stdint_h") CONFIG_COMMANDS="$CONFIG_COMMANDS $ac_stdint_h" ;;
"Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
"lib/Makefile") CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;;
"sanei/Makefile") CONFIG_FILES="$CONFIG_FILES sanei/Makefile" ;;
"frontend/Makefile") CONFIG_FILES="$CONFIG_FILES frontend/Makefile" ;;
"japi/Makefile") CONFIG_FILES="$CONFIG_FILES japi/Makefile" ;;
"backend/Makefile") CONFIG_FILES="$CONFIG_FILES backend/Makefile" ;;
"include/Makefile") CONFIG_FILES="$CONFIG_FILES include/Makefile" ;;
"doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
"po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;;
"testsuite/Makefile") CONFIG_FILES="$CONFIG_FILES testsuite/Makefile" ;;
"testsuite/backend/Makefile") CONFIG_FILES="$CONFIG_FILES testsuite/backend/Makefile" ;;
"testsuite/backend/genesys/Makefile") CONFIG_FILES="$CONFIG_FILES testsuite/backend/genesys/Makefile" ;;
"testsuite/sanei/Makefile") CONFIG_FILES="$CONFIG_FILES testsuite/sanei/Makefile" ;;
"testsuite/tools/Makefile") CONFIG_FILES="$CONFIG_FILES testsuite/tools/Makefile" ;;
"tools/Makefile") CONFIG_FILES="$CONFIG_FILES tools/Makefile" ;;
"doc/doxygen-sanei.conf") CONFIG_FILES="$CONFIG_FILES doc/doxygen-sanei.conf" ;;
"doc/doxygen-genesys.conf") CONFIG_FILES="$CONFIG_FILES doc/doxygen-genesys.conf" ;;
"tools/sane-config") CONFIG_FILES="$CONFIG_FILES tools/sane-config" ;;
"tools/sane-backends.pc") CONFIG_FILES="$CONFIG_FILES tools/sane-backends.pc" ;;
*) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
esac
done
# If the user did not use the arguments to specify the items to instantiate,
# then the envvar interface is used. Set only those that are not.
# We use the long form for the default assignment because of an extremely
# bizarre bug on SunOS 4.1.3.
if $ac_need_defaults; then
test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
fi
# Have a temporary directory for convenience. Make it in the build tree
# simply because there is no reason against having it here, and in addition,
# creating and moving files from /tmp can sometimes cause problems.
# Hook for its removal unless debugging.
# Note that there is a small window in which the directory will not be cleaned:
# after its creation but before its name has been assigned to `$tmp'.
$debug ||
{
tmp= ac_tmp=
trap 'exit_status=$?
: "${ac_tmp:=$tmp}"
{ test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
' 0
trap 'as_fn_exit 1' 1 2 13 15
}
# Create a (secure) tmp directory for tmp files.
{
tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
test -d "$tmp"
} ||
{
tmp=./conf$$-$RANDOM
(umask 077 && mkdir "$tmp")
} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
ac_tmp=$tmp
# Set up the scripts for CONFIG_FILES section.
# No need to generate them if there are no CONFIG_FILES.
# This happens for instance with `./config.status config.h'.
if test -n "$CONFIG_FILES"; then
ac_cr=`echo X | tr X '\015'`
# On cygwin, bash can eat \r inside `` if the user requested igncr.
# But we know of no other shell where ac_cr would be empty at this
# point, so we can use a bashism as a fallback.
if test "x$ac_cr" = x; then
eval ac_cr=\$\'\\r\'
fi
ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
ac_cs_awk_cr='\\r'
else
ac_cs_awk_cr=$ac_cr
fi
echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
cat >>"$ac_tmp/subs1.awk" <<\_ACAWK &&
S["am__EXEEXT_FALSE"]=""
S["am__EXEEXT_TRUE"]="#"
S["LTLIBOBJS"]=""
S["AM_LDFLAGS"]=""
S["AM_CXXFLAGS"]=" -Wall -Wextra -pedantic"
S["AM_CFLAGS"]=" -Wall -Wextra -pedantic"
S["AM_CPPFLAGS"]=" -D_REENTRANT -DPATH_SANE_CONFIG_DIR=$(configdir) -DPATH_SANE_DATA_DIR=$(datadir) -DPATH_SANE_LOCK_DIR=$(locksanedir) -DV_MAJOR=1 -DV_MINOR"\
"=0"
S["WITH_API_HTML_FALSE"]=""
S["WITH_API_HTML_TRUE"]="#"
S["WITH_API_PDF_FALSE"]=""
S["WITH_API_PDF_TRUE"]="#"
S["WITH_API_PS_FALSE"]=""
S["WITH_API_PS_TRUE"]="#"
S["PPMTOGIF"]="no"
S["DLH"]="no"
S["GS"]="/usr/bin/gs"
S["FIG2DEV"]="no"
S["PDFLATEX"]="no"
S["LATEX"]="no"
S["DVIPS"]="no"
S["MAKEINDEX"]="no"
S["BACKEND_MANS_ENABLED"]=" sane-pixma.5 sane-pixma.5"
S["BACKEND_CONFS_ENABLED"]=" pixma.conf pixma.conf"
S["PRELOADABLE_BACKENDS_ENABLED"]=" libpixma.la"
S["preloadable_backends_enabled_FALSE"]="#"
S["preloadable_backends_enabled_TRUE"]=""
S["PRELOADABLE_BACKENDS"]=" pixma"
S["INSTALL_UMAX_PP_TOOLS_FALSE"]=""
S["INSTALL_UMAX_PP_TOOLS_TRUE"]="#"
S["BACKEND_LIBS_ENABLED"]=" libsane-pixma.la"
S["SANEI_SANEI_JPEG_LO"]="../sanei/sanei_jpeg.lo"
S["HAVE_JPEG_FALSE"]="#"
S["HAVE_JPEG_TRUE"]=""
S["BACKENDS"]=" pixma"
S["COMPILE_SANED_FALSE"]="#"
S["COMPILE_SANED_TRUE"]=""
S["configdir"]="/home/rainer/etc/sane.d"
S["locksanedir"]="/home/rainer/var/lock/sane"
S["SCSI_LIBS"]=""
S["have_libxml2_FALSE"]="#"
S["have_libxml2_TRUE"]=""
S["XML_LIBS"]="-lxml2 "
S["XML_CFLAGS"]="-I/usr/include/libxml2 "
S["have_libcurl_FALSE"]="#"
S["have_libcurl_TRUE"]=""
S["libcurl_LIBS"]="-lcurl "
S["libcurl_CFLAGS"]=""
S["have_usblib_FALSE"]="#"
S["have_usblib_TRUE"]=""
S["USB_LIBS"]="-lusb-1.0 "
S["USB_CFLAGS"]="-I/usr/include/libusb-1.0 "
S["SYSTEMD_LIBS"]=""
S["SYSTEMD_CFLAGS"]=""
S["SOCKET_LIBS"]=" "
S["LTALLOCA"]=""
S["LIBOBJS"]=""
S["ALLOCA"]=""
S["RESMGR_LIBS"]=""
S["SNMP_CFLAGS"]=""
S["SNMP_LIBS"]=""
S["SNMP_CONFIG_PATH"]=""
S["have_libavahi_FALSE"]=""
S["have_libavahi_TRUE"]="#"
S["AVAHI_LIBS"]=""
S["AVAHI_CFLAGS"]=""
S["LIBV4L_LIBS"]=""
S["LIBV4L_CFLAGS"]=""
S["GPHOTO2_LDFLAGS"]=""
S["GPHOTO2_LIBS"]=""
S["GPHOTO2_CPPFLAGS"]=""
S["HAVE_GPHOTO2"]=""
S["LOCKPATH_GROUP"]="uucp"
S["INSTALL_LOCKPATH"]=""
S["SANEI_THREAD_LIBS"]="-lpthread"
S["PTHREAD_LIBS"]="-lpthread"
S["IEEE1284_LIBS"]=""
S["PNG_LIBS"]="-lpng"
S["TIFF_LIBS"]="-ltiff"
S["JPEG_LIBS"]="-ljpeg"
S["SYSLOG_LIBS"]=""
S["MATH_LIB"]="-lm"
S["DYNAMIC_FLAG"]=""
S["DL_LIBS"]=""
S["effective_target"]="x86_64-pc-linux-gnu"
S["STRICT_LDFLAGS"]="-Wl,-z,defs"
S["HAVE_CXX11"]="1"
S["CROSS_COMPILING_FALSE"]=""
S["CROSS_COMPILING_TRUE"]="#"
S["PKG_CONFIG_LIBDIR"]=""
S["PKG_CONFIG_PATH"]=""
S["PKG_CONFIG"]="/usr/bin/pkg-config"
S["SANE_CONFIG_PATH"]="no"
S["POSUB"]=""
S["LTLIBINTL"]=""
S["LIBINTL"]=""
S["INTLLIBS"]=""
S["LTLIBICONV"]="-liconv"
S["LIBICONV"]="-liconv"
S["INTL_MACOSX_LIBS"]=""
S["XGETTEXT_EXTRA_OPTIONS"]=""
S["MSGMERGE"]="/usr/bin/msgmerge"
S["XGETTEXT_015"]="/usr/bin/xgettext"
S["XGETTEXT"]="/usr/bin/xgettext"
S["GMSGFMT_015"]="/usr/bin/gmsgfmt"
S["MSGFMT_015"]="/usr/bin/msgfmt"
S["GMSGFMT"]="/usr/bin/gmsgfmt"
S["MSGFMT"]="/usr/bin/msgfmt"
S["GETTEXT_MACRO_VERSION"]="0.19"
S["USE_NLS"]="no"
S["CXXCPP"]="g++ -E"
S["LT_SYS_LIBRARY_PATH"]=""
S["OTOOL64"]=""
S["OTOOL"]=""
S["LIPO"]=""
S["NMEDIT"]=""
S["DSYMUTIL"]=""
S["MANIFEST_TOOL"]=":"
S["RANLIB"]="ranlib"
S["LN_S"]="ln -s"
S["NM"]="/usr/bin/nm -B"
S["ac_ct_DUMPBIN"]=""
S["DUMPBIN"]=""
S["LD"]="/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64"
S["FGREP"]="/bin/grep -F"
S["SED"]="/bin/sed"
S["host_os"]="linux-gnu"
S["host_vendor"]="pc"
S["host_cpu"]="x86_64"
S["host"]="x86_64-pc-linux-gnu"
S["build_os"]="linux-gnu"
S["build_vendor"]="pc"
S["build_cpu"]="x86_64"
S["build"]="x86_64-pc-linux-gnu"
S["LIBTOOL"]="$(SHELL) $(top_builddir)/libtool"
S["OBJDUMP"]="objdump"
S["DLLTOOL"]="false"
S["AS"]="as"
S["ac_ct_AR"]="ar"
S["AR"]="ar"
S["EGREP"]="/bin/grep -E"
S["GREP"]="/bin/grep"
S["CPP"]="gcc -E"
S["am__fastdepCXX_FALSE"]="#"
S["am__fastdepCXX_TRUE"]=""
S["CXXDEPMODE"]="depmode=gcc3"
S["ac_ct_CXX"]="g++"
S["CXXFLAGS"]="-g -O2"
S["CXX"]="g++"
S["am__fastdepCC_FALSE"]="#"
S["am__fastdepCC_TRUE"]=""
S["CCDEPMODE"]="depmode=gcc3"
S["am__nodep"]="_no"
S["AMDEPBACKSLASH"]="\\"
S["AMDEP_FALSE"]="#"
S["AMDEP_TRUE"]=""
S["am__include"]="include"
S["DEPDIR"]=".deps"
S["OBJEXT"]="o"
S["EXEEXT"]=""
S["ac_ct_CC"]="gcc"
S["CPPFLAGS"]=""
S["LDFLAGS"]=""
S["CFLAGS"]="-g -O2"
S["CC"]="gcc"
S["V_REV"]="29"
S["V_MINOR"]="0"
S["V_MAJOR"]="1"
S["MAINT"]="#"
S["MAINTAINER_MODE_FALSE"]=""
S["MAINTAINER_MODE_TRUE"]="#"
S["AM_BACKSLASH"]="\\"
S["AM_DEFAULT_VERBOSITY"]="1"
S["AM_DEFAULT_V"]="$(AM_DEFAULT_VERBOSITY)"
S["AM_V"]="$(V)"
S["am__untar"]="$${TAR-tar} xf -"
S["am__tar"]="$${TAR-tar} chof - \"$$tardir\""
S["AMTAR"]="$${TAR-tar}"
S["am__leading_dot"]="."
S["SET_MAKE"]=""
S["AWK"]="gawk"
S["mkdir_p"]="$(MKDIR_P)"
S["MKDIR_P"]="/bin/mkdir -p"
S["INSTALL_STRIP_PROGRAM"]="$(install_sh) -c -s"
S["STRIP"]="strip"
S["install_sh"]="${SHELL} /home/rainer/repo/sane-backends/install-sh"
S["MAKEINFO"]="${SHELL} /home/rainer/repo/sane-backends/missing makeinfo"
S["AUTOHEADER"]="${SHELL} /home/rainer/repo/sane-backends/missing autoheader"
S["AUTOMAKE"]="${SHELL} /home/rainer/repo/sane-backends/missing automake-1.16"
S["AUTOCONF"]="${SHELL} /home/rainer/repo/sane-backends/missing autoconf"
S["ACLOCAL"]="${SHELL} /home/rainer/repo/sane-backends/missing aclocal-1.16"
S["VERSION"]="1.0.29+72-dirty"
S["PACKAGE"]="sane-backends"
S["CYGPATH_W"]="echo"
S["am__isrc"]=""
S["INSTALL_DATA"]="${INSTALL} -m 644"
S["INSTALL_SCRIPT"]="${INSTALL}"
S["INSTALL_PROGRAM"]="${INSTALL}"
S["target_alias"]=""
S["host_alias"]=""
S["build_alias"]=""
S["LIBS"]=""
S["ECHO_T"]=""
S["ECHO_N"]="-n"
S["ECHO_C"]=""
S["DEFS"]="-DHAVE_CONFIG_H"
S["mandir"]="/home/rainer/man"
S["localedir"]="${datarootdir}/locale"
S["libdir"]="/home/rainer/lib"
S["psdir"]="${docdir}"
S["pdfdir"]="${docdir}"
S["dvidir"]="${docdir}"
S["htmldir"]="${docdir}"
S["infodir"]="${datarootdir}/info"
S["docdir"]="/home/rainer/doc/sane-backends"
S["oldincludedir"]="/usr/include"
S["includedir"]="/home/rainer/include"
S["localstatedir"]="/home/rainer/var"
S["sharedstatedir"]="/home/rainer/com"
S["sysconfdir"]="/home/rainer/etc"
S["datadir"]="/home/rainer/share"
S["datarootdir"]="/home/rainer/share"
S["libexecdir"]="/home/rainer/libexec"
S["sbindir"]="/home/rainer/bin"
S["bindir"]="/home/rainer/bin"
S["program_transform_name"]="s,x,x,"
S["prefix"]="/home/rainer"
S["exec_prefix"]="${prefix}"
S["PACKAGE_URL"]=""
S["PACKAGE_BUGREPORT"]="sane-devel at alioth-lists.debian.net"
S["PACKAGE_STRING"]="sane-backends 1.0.29+72-dirty"
S["PACKAGE_VERSION"]="1.0.29+72-dirty"
S["PACKAGE_TARNAME"]="sane-backends"
S["PACKAGE_NAME"]="sane-backends"
S["PATH_SEPARATOR"]=":"
S["SHELL"]="/bin/sh"
S["am__quote"]=""
_ACAWK
cat >>"$ac_tmp/subs1.awk" <<_ACAWK &&
for (key in S) S_is_set[key] = 1
FS = ""
}
{
line = $ 0
nfields = split(line, field, "@")
substed = 0
len = length(field[1])
for (i = 2; i < nfields; i++) {
key = field[i]
keylen = length(key)
if (S_is_set[key]) {
value = S[key]
line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
len += length(value) + length(field[++i])
substed = 1
} else
len += 1 + keylen
}
print line
}
_ACAWK
if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
else
cat
fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
|| as_fn_error $? "could not setup config files machinery" "$LINENO" 5
fi # test -n "$CONFIG_FILES"
# Set up the scripts for CONFIG_HEADERS section.
# No need to generate them if there are no CONFIG_HEADERS.
# This happens for instance with `./config.status Makefile'.
if test -n "$CONFIG_HEADERS"; then
cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
BEGIN {
D["PACKAGE_NAME"]=" \"sane-backends\""
D["PACKAGE_TARNAME"]=" \"sane-backends\""
D["PACKAGE_VERSION"]=" \"1.0.29+72-dirty\""
D["PACKAGE_STRING"]=" \"sane-backends 1.0.29+72-dirty\""
D["PACKAGE_BUGREPORT"]=" \"sane-devel at alioth-lists.debian.net\""
D["PACKAGE_URL"]=" \"\""
D["PACKAGE"]=" \"sane-backends\""
D["VERSION"]=" \"1.0.29+72-dirty\""
D["SANE_DLL_V_MAJOR"]=" 1"
D["SANE_DLL_V_MINOR"]=" 0"
D["SANE_DLL_V_BUILD"]=" 29"
D["STDC_HEADERS"]=" 1"
D["HAVE_SYS_TYPES_H"]=" 1"
D["HAVE_SYS_STAT_H"]=" 1"
D["HAVE_STDLIB_H"]=" 1"
D["HAVE_STRING_H"]=" 1"
D["HAVE_MEMORY_H"]=" 1"
D["HAVE_STRINGS_H"]=" 1"
D["HAVE_INTTYPES_H"]=" 1"
D["HAVE_STDINT_H"]=" 1"
D["HAVE_UNISTD_H"]=" 1"
D["__EXTENSIONS__"]=" 1"
D["_ALL_SOURCE"]=" 1"
D["_GNU_SOURCE"]=" 1"
D["_POSIX_PTHREAD_SEMANTICS"]=" 1"
D["_TANDEM_SOURCE"]=" 1"
D["HAVE_DLFCN_H"]=" 1"
D["LT_OBJDIR"]=" \".libs/\""
D["HAVE_CXX11"]=" 1"
D["HAVE_LIBJPEG"]=" 1"
D["HAVE_LIBPNG"]=" 1"
D["HAVE_PTHREAD_H"]=" 1"
D["HAVE_PTHREAD_CREATE"]=" 1"
D["HAVE_PTHREAD_KILL"]=" 1"
D["HAVE_PTHREAD_JOIN"]=" 1"
D["HAVE_PTHREAD_DETACH"]=" 1"
D["HAVE_PTHREAD_CANCEL"]=" 1"
D["HAVE_PTHREAD_TESTCANCEL"]=" 1"
D["PTHREAD_T_IS_INTEGER"]=" 1"
D["USE_PTHREAD"]=" \"yes\""
D["STDC_HEADERS"]=" 1"
D["HAVE_FCNTL_H"]=" 1"
D["HAVE_UNISTD_H"]=" 1"
D["HAVE_SYS_SELECT_H"]=" 1"
D["HAVE_SYS_TIME_H"]=" 1"
D["HAVE_SYS_SHM_H"]=" 1"
D["HAVE_SYS_IPC_H"]=" 1"
D["HAVE_SYS_SOCKET_H"]=" 1"
D["HAVE_SYS_IO_H"]=" 1"
D["HAVE_SYS_TYPES_H"]=" 1"
D["HAVE_LINUX_PPDEV_H"]=" 1"
D["HAVE_SYS_SEM_H"]=" 1"
D["HAVE_SYS_POLL_H"]=" 1"
D["HAVE_LIMITS_H"]=" 1"
D["HAVE_SYS_IOCTL_H"]=" 1"
D["HAVE_ASM_TYPES_H"]=" 1"
D["HAVE_NETINET_IN_H"]=" 1"
D["HAVE_TIFFIO_H"]=" 1"
D["HAVE_IFADDRS_H"]=" 1"
D["HAVE_PWD_H"]=" 1"
D["HAVE_GETOPT_H"]=" 1"
D["HAVE_U_CHAR"]=" 1"
D["HAVE_U_SHORT"]=" 1"
D["HAVE_U_INT"]=" 1"
D["HAVE_U_LONG"]=" 1"
D["HAVE_LONG_LONG"]=" 1"
D["HAVE_STRUCT_FLOCK"]=" 1"
D["HAVE_ALLOCA_H"]=" 1"
D["HAVE_ALLOCA"]=" 1"
D["HAVE_GETENV"]=" 1"
D["HAVE_INET_NTOP"]=" 1"
D["HAVE_INET_PTON"]=" 1"
D["HAVE_SIGPROCMASK"]=" 1"
D["HAVE_SLEEP"]=" 1"
D["HAVE_SNPRINTF"]=" 1"
D["HAVE_STRCASESTR"]=" 1"
D["HAVE_STRDUP"]=" 1"
D["HAVE_STRNDUP"]=" 1"
D["HAVE_STRSEP"]=" 1"
D["HAVE_SYSLOG"]=" 1"
D["HAVE_USLEEP"]=" 1"
D["HAVE_VSYSLOG"]=" 1"
D["HAVE_INET_ADDR"]=" 1"
D["HAVE_INET_ATON"]=" 1"
D["HAVE_INET_NTOA"]=" 1"
D["HAVE_STDLIB_H"]=" 1"
D["HAVE_UNISTD_H"]=" 1"
D["HAVE_SYS_PARAM_H"]=" 1"
D["HAVE_GETPAGESIZE"]=" 1"
D["HAVE_MMAP"]=" 1"
D["HAVE_ATEXIT"]=" 1"
D["HAVE_IOPERM"]=" 1"
D["HAVE_MKDIR"]=" 1"
D["HAVE_STRFTIME"]=" 1"
D["HAVE_STRSTR"]=" 1"
D["HAVE_STRTOD"]=" 1"
D["HAVE_CFMAKERAW"]=" 1"
D["HAVE_TCSENDBREAK"]=" 1"
D["HAVE_STRCASECMP"]=" 1"
D["HAVE_STRNCASECMP"]=" 1"
D["HAVE_GETADDRINFO"]=" 1"
D["HAVE_GETNAMEINFO"]=" 1"
D["HAVE_POLL"]=" 1"
D["HAVE_SETITIMER"]=" 1"
D["HAVE_IOPL"]=" 1"
D["HAVE_GETUID"]=" 1"
D["HAVE_GETPASS"]=" 1"
D["SANE_HAVE_SYS_IO_H_WITH_INB_OUTB"]=" 1"
D["HAVE_GETOPT_LONG"]=" 1"
D["HAVE_DEV_URANDOM"]=" 1"
D["HAVE_LIBUSB"]=" 1"
D["HAVE_LIBCURL"]=" 0"
D["HAVE_LIBCURL"]=" 1"
D["HAVE_LIBXML2"]=" 1"
D["WITH_USB_RECORD_REPLAY"]=" 1"
D["HAVE_SCSI_SG_H"]=" 1"
D["HAVE_SG_TARGET_STATUS"]=" 1"
D["SCSIBUFFERSIZE"]=" 131072"
D["ENABLE_IPV6"]=" 1"
D["HAS_SS_FAMILY"]=" 1"
for (key in D) D_is_set[key] = 1
FS = ""
}
/^[\t ]*#[\t ]*(define|undef)[\t ]+[_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ][_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789]*([\t (]|$)/ {
line = $ 0
split(line, arg, " ")
if (arg[1] == "#") {
defundef = arg[2]
mac1 = arg[3]
} else {
defundef = substr(arg[1], 2)
mac1 = arg[2]
}
split(mac1, mac2, "(") #)
macro = mac2[1]
prefix = substr(line, 1, index(line, defundef) - 1)
if (D_is_set[macro]) {
# Preserve the white space surrounding the "#".
print prefix "define", macro P[macro] D[macro]
next
} else {
# Replace #undef with comments. This is necessary, for example,
# in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
if (defundef == "undef") {
print "/*", prefix defundef, macro, "*/"
next
}
}
}
{ print }
_ACAWK
as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
fi # test -n "$CONFIG_HEADERS"
eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS"
shift
for ac_tag
do
case $ac_tag in
:[FHLC]) ac_mode=$ac_tag; continue;;
esac
case $ac_mode$ac_tag in
:[FHL]*:*);;
:L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
:[FH]-) ac_tag=-:-;;
:[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
esac
ac_save_IFS=$IFS
IFS=:
set x $ac_tag
IFS=$ac_save_IFS
shift
ac_file=$1
shift
case $ac_mode in
:L) ac_source=$1;;
:[FH])
ac_file_inputs=
for ac_f
do
case $ac_f in
-) ac_f="$ac_tmp/stdin";;
*) # Look for the file first in the build tree, then in the source tree
# (if the path is not absolute). The absolute path cannot be DOS-style,
# because $ac_f cannot contain `:'.
test -f "$ac_f" ||
case $ac_f in
[\\/$]*) false;;
*) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
esac ||
as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
esac
case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
as_fn_append ac_file_inputs " '$ac_f'"
done
# Let's still pretend it is `configure' which instantiates (i.e., don't
# use $as_me), people would be surprised to read:
# /* config.h. Generated by config.status. */
configure_input='Generated from '`
$as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
`' by configure.'
if test x"$ac_file" != x-; then
configure_input="$ac_file. $configure_input"
{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
$as_echo "$as_me: creating $ac_file" >&6;}
fi
# Neutralize special characters interpreted by sed in replacement strings.
case $configure_input in #(
*\&* | *\|* | *\\* )
ac_sed_conf_input=`$as_echo "$configure_input" |
sed 's/[\\\\&|]/\\\\&/g'`;; #(
*) ac_sed_conf_input=$configure_input;;
esac
case $ac_tag in
*:-:* | *:-) cat >"$ac_tmp/stdin" \
|| as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
esac
;;
esac
ac_dir=`$as_dirname -- "$ac_file" ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$ac_file" : 'X\(//\)[^/]' \| \
X"$ac_file" : 'X\(//\)$' \| \
X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$ac_file" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
as_dir="$ac_dir"; as_fn_mkdir_p
ac_builddir=.
case "$ac_dir" in
.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
*)
ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
# A ".." for each directory in $ac_dir_suffix.
ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
case $ac_top_builddir_sub in
"") ac_top_builddir_sub=. ac_top_build_prefix= ;;
*) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
esac ;;
esac
ac_abs_top_builddir=$ac_pwd
ac_abs_builddir=$ac_pwd$ac_dir_suffix
# for backward compatibility:
ac_top_builddir=$ac_top_build_prefix
case $srcdir in
.) # We are building in place.
ac_srcdir=.
ac_top_srcdir=$ac_top_builddir_sub
ac_abs_top_srcdir=$ac_pwd ;;
[\\/]* | ?:[\\/]* ) # Absolute name.
ac_srcdir=$srcdir$ac_dir_suffix;
ac_top_srcdir=$srcdir
ac_abs_top_srcdir=$srcdir ;;
*) # Relative name.
ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_build_prefix$srcdir
ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
case $ac_mode in
:F)
#
# CONFIG_FILE
#
case $INSTALL in
[\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
*) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
esac
ac_MKDIR_P=$MKDIR_P
case $MKDIR_P in
[\\/$]* | ?:[\\/]* ) ;;
*/*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
esac
# If the template does not know about datarootdir, expand it.
# FIXME: This hack should be removed a few years after 2.60.
ac_datarootdir_hack=; ac_datarootdir_seen=
ac_sed_dataroot='
/datarootdir/ {
p
q
}
/@datadir@/p
/@docdir@/p
/@infodir@/p
/@localedir@/p
/@mandir@/p'
case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
*datarootdir*) ac_datarootdir_seen=yes;;
*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
ac_datarootdir_hack='
s&@datadir@&/home/rainer/share&g
s&@docdir@&/home/rainer/doc/sane-backends&g
s&@infodir@&${datarootdir}/info&g
s&@localedir@&${datarootdir}/locale&g
s&@mandir@&/home/rainer/man&g
s&\${datarootdir}&/home/rainer/share&g' ;;
esac
ac_sed_extra="/^[ ]*VPATH[ ]*=[ ]*/{
h
s///
s/^/:/
s/[ ]*$/:/
s/:\$(srcdir):/:/g
s/:\${srcdir}:/:/g
s/:@srcdir@:/:/g
s/^:*//
s/:*$//
x
s/\(=[ ]*\).*/\1/
G
s/\n//
s/^[^=]*=[ ]*$//
}
:t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
s|@configure_input@|$ac_sed_conf_input|;t t
s&@top_builddir@&$ac_top_builddir_sub&;t t
s&@top_build_prefix@&$ac_top_build_prefix&;t t
s&@srcdir@&$ac_srcdir&;t t
s&@abs_srcdir@&$ac_abs_srcdir&;t t
s&@top_srcdir@&$ac_top_srcdir&;t t
s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
s&@builddir@&$ac_builddir&;t t
s&@abs_builddir@&$ac_abs_builddir&;t t
s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
s&@INSTALL@&$ac_INSTALL&;t t
s&@MKDIR_P@&$ac_MKDIR_P&;t t
$ac_datarootdir_hack
"
eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
>$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
{ ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
{ ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
"$ac_tmp/out"`; test -z "$ac_out"; } &&
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined. Please make sure it is defined" >&5
$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined. Please make sure it is defined" >&2;}
rm -f "$ac_tmp/stdin"
case $ac_file in
-) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
*) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
esac \
|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
;;
:H)
#
# CONFIG_HEADER
#
if test x"$ac_file" != x-; then
{
$as_echo "/* $configure_input */" \
&& eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
} >"$ac_tmp/config.h" \
|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
$as_echo "$as_me: $ac_file is unchanged" >&6;}
else
rm -f "$ac_file"
mv "$ac_tmp/config.h" "$ac_file" \
|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
fi
else
$as_echo "/* $configure_input */" \
&& eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
|| as_fn_error $? "could not create -" "$LINENO" 5
fi
# Compute "$ac_file"'s index in $config_headers.
_am_arg="$ac_file"
_am_stamp_count=1
for _am_header in $config_headers :; do
case $_am_header in
$_am_arg | $_am_arg:* )
break ;;
* )
_am_stamp_count=`expr $_am_stamp_count + 1` ;;
esac
done
echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$_am_arg" : 'X\(//\)[^/]' \| \
X"$_am_arg" : 'X\(//\)$' \| \
X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$_am_arg" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`/stamp-h$_am_stamp_count
;;
:C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
$as_echo "$as_me: executing $ac_file commands" >&6;}
;;
esac
case $ac_file$ac_mode in
"depfiles":C) test x"$AMDEP_TRUE" != x"" || {
# Older Autoconf quotes --file arguments for eval, but not when files
# are listed without --file. Let's play safe and only enable the eval
# if we detect the quoting.
# TODO: see whether this extra hack can be removed once we start
# requiring Autoconf 2.70 or later.
case $CONFIG_FILES in #(
*\'*) :
eval set x "$CONFIG_FILES" ;; #(
*) :
set x $CONFIG_FILES ;; #(
*) :
;;
esac
shift
# Used to flag and report bootstrapping failures.
am_rc=0
for am_mf
do
# Strip MF so we end up with the name of the file.
am_mf=`$as_echo "$am_mf" | sed -e 's/:.*$//'`
# Check whether this is an Automake generated Makefile which includes
# dependency-tracking related rules and includes.
# Grep'ing the whole file directly is not great: AIX grep has a line
# limit of 2048, but all sed's we know have understand at least 4000.
sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \
|| continue
am_dirpart=`$as_dirname -- "$am_mf" ||
$as_expr X"$am_mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$am_mf" : 'X\(//\)[^/]' \| \
X"$am_mf" : 'X\(//\)$' \| \
X"$am_mf" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$am_mf" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
am_filepart=`$as_basename -- "$am_mf" ||
$as_expr X/"$am_mf" : '.*/\([^/][^/]*\)/*$' \| \
X"$am_mf" : 'X\(//\)$' \| \
X"$am_mf" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X/"$am_mf" |
sed '/^.*\/\([^/][^/]*\)\/*$/{
s//\1/
q
}
/^X\/\(\/\/\)$/{
s//\1/
q
}
/^X\/\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
{ echo "$as_me:$LINENO: cd "$am_dirpart" \
&& sed -e '/# am--include-marker/d' "$am_filepart" \
| $MAKE -f - am--depfiles" >&5
(cd "$am_dirpart" \
&& sed -e '/# am--include-marker/d' "$am_filepart" \
| $MAKE -f - am--depfiles) >&5 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } || am_rc=$?
done
if test $am_rc -ne 0; then
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "Something went wrong bootstrapping makefile fragments
for automatic dependency tracking. Try re-running configure with the
'--disable-dependency-tracking' option to at least be able to build
the package (albeit without support for automatic dependency tracking).
See \`config.log' for more details" "$LINENO" 5; }
fi
{ am_dirpart=; unset am_dirpart;}
{ am_filepart=; unset am_filepart;}
{ am_mf=; unset am_mf;}
{ am_rc=; unset am_rc;}
rm -f conftest-deps.mk
}
;;
"libtool":C)
# See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes.
if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
cfgfile=${ofile}T
trap "$RM \"$cfgfile\"; exit 1" 1 2 15
$RM "$cfgfile"
cat <<_LT_EOF >> "$cfgfile"
#! $SHELL
# Generated automatically by $as_me ($PACKAGE) $VERSION
# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
# Provide generalized library-building support services.
# Written by Gordon Matzigkeit, 1996
# Copyright (C) 2014 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions. There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# GNU Libtool is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of of the License, or
# (at your option) any later version.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program or library that is built
# using GNU Libtool, you may include this file under the same
# distribution terms that you use for the rest of that program.
#
# GNU Libtool is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# The names of the tagged configurations supported by this script.
available_tags='CXX '
# Configured defaults for sys_lib_dlsearch_path munging.
: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
# ### BEGIN LIBTOOL CONFIG
# Which release of libtool.m4 was used?
macro_version=$macro_version
macro_revision=$macro_revision
# Whether or not to build static libraries.
build_old_libs=$enable_static
# Assembler program.
AS=$lt_AS
# DLL creation program.
DLLTOOL=$lt_DLLTOOL
# Object dumper program.
OBJDUMP=$lt_OBJDUMP
# Whether or not to build shared libraries.
build_libtool_libs=$enable_shared
# What type of objects to build.
pic_mode=$pic_mode
# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install
# Shared archive member basename,for filename based shared library versioning on AIX.
shared_archive_member_spec=$shared_archive_member_spec
# Shell to use when invoking shell scripts.
SHELL=$lt_SHELL
# An echo program that protects backslashes.
ECHO=$lt_ECHO
# The PATH separator for the build system.
PATH_SEPARATOR=$lt_PATH_SEPARATOR
# The host system.
host_alias=$host_alias
host=$host
host_os=$host_os
# The build system.
build_alias=$build_alias
build=$build
build_os=$build_os
# A sed program that does not truncate output.
SED=$lt_SED
# Sed that helps us avoid accidentally triggering echo(1) options like -n.
Xsed="\$SED -e 1s/^X//"
# A grep program that handles long lines.
GREP=$lt_GREP
# An ERE matcher.
EGREP=$lt_EGREP
# A literal string matcher.
FGREP=$lt_FGREP
# A BSD- or MS-compatible name lister.
NM=$lt_NM
# Whether we need soft or hard links.
LN_S=$lt_LN_S
# What is the maximum length of a command?
max_cmd_len=$max_cmd_len
# Object file suffix (normally "o").
objext=$ac_objext
# Executable file suffix (normally "").
exeext=$exeext
# whether the shell understands "unset".
lt_unset=$lt_unset
# turn spaces into newlines.
SP2NL=$lt_lt_SP2NL
# turn newlines into spaces.
NL2SP=$lt_lt_NL2SP
# convert \$build file names to \$host format.
to_host_file_cmd=$lt_cv_to_host_file_cmd
# convert \$build files to toolchain format.
to_tool_file_cmd=$lt_cv_to_tool_file_cmd
# Method to check whether dependent libraries are shared objects.
deplibs_check_method=$lt_deplibs_check_method
# Command to use when deplibs_check_method = "file_magic".
file_magic_cmd=$lt_file_magic_cmd
# How to find potential files when deplibs_check_method = "file_magic".
file_magic_glob=$lt_file_magic_glob
# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
want_nocaseglob=$lt_want_nocaseglob
# Command to associate shared and link libraries.
sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
# The archiver.
AR=$lt_AR
# Flags to create an archive.
AR_FLAGS=$lt_AR_FLAGS
# How to feed a file listing to the archiver.
archiver_list_spec=$lt_archiver_list_spec
# A symbol stripping program.
STRIP=$lt_STRIP
# Commands used to install an old-style archive.
RANLIB=$lt_RANLIB
old_postinstall_cmds=$lt_old_postinstall_cmds
old_postuninstall_cmds=$lt_old_postuninstall_cmds
# Whether to use a lock for old archive extraction.
lock_old_archive_extraction=$lock_old_archive_extraction
# A C compiler.
LTCC=$lt_CC
# LTCC compiler flags.
LTCFLAGS=$lt_CFLAGS
# Take the output of nm and produce a listing of raw symbols and C names.
global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
# Transform the output of nm in a proper C declaration.
global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
# Transform the output of nm into a list of symbols to manually relocate.
global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import
# Transform the output of nm in a C name address pair.
global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
# Transform the output of nm in a C name address pair when lib prefix is needed.
global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
# The name lister interface.
nm_interface=$lt_lt_cv_nm_interface
# Specify filename containing input files for \$NM.
nm_file_list_spec=$lt_nm_file_list_spec
# The root where to search for dependent libraries,and where our libraries should be installed.
lt_sysroot=$lt_sysroot
# Command to truncate a binary pipe.
lt_truncate_bin=$lt_lt_cv_truncate_bin
# The name of the directory that contains temporary libtool files.
objdir=$objdir
# Used to examine libraries when file_magic_cmd begins with "file".
MAGIC_CMD=$MAGIC_CMD
# Must we lock files when doing compilation?
need_locks=$lt_need_locks
# Manifest tool.
MANIFEST_TOOL=$lt_MANIFEST_TOOL
# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
DSYMUTIL=$lt_DSYMUTIL
# Tool to change global to local symbols on Mac OS X.
NMEDIT=$lt_NMEDIT
# Tool to manipulate fat objects and archives on Mac OS X.
LIPO=$lt_LIPO
# ldd/readelf like tool for Mach-O binaries on Mac OS X.
OTOOL=$lt_OTOOL
# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
OTOOL64=$lt_OTOOL64
# Old archive suffix (normally "a").
libext=$libext
# Shared library suffix (normally ".so").
shrext_cmds=$lt_shrext_cmds
# The commands to extract the exported symbol list from a shared archive.
extract_expsyms_cmds=$lt_extract_expsyms_cmds
# Variables whose values should be saved in libtool wrapper scripts and
# restored at link time.
variables_saved_for_relink=$lt_variables_saved_for_relink
# Do we need the "lib" prefix for modules?
need_lib_prefix=$need_lib_prefix
# Do we need a version for libraries?
need_version=$need_version
# Library versioning type.
version_type=$version_type
# Shared library runtime path variable.
runpath_var=$runpath_var
# Shared library path variable.
shlibpath_var=$shlibpath_var
# Is shlibpath searched before the hard-coded library search path?
shlibpath_overrides_runpath=$shlibpath_overrides_runpath
# Format of library name prefix.
libname_spec=$lt_libname_spec
# List of archive names. First name is the real one, the rest are links.
# The last name is the one that the linker finds with -lNAME
library_names_spec=$lt_library_names_spec
# The coded name of the library, if different from the real name.
soname_spec=$lt_soname_spec
# Permission mode override for installation of shared libraries.
install_override_mode=$lt_install_override_mode
# Command to use after installation of a shared archive.
postinstall_cmds=$lt_postinstall_cmds
# Command to use after uninstallation of a shared archive.
postuninstall_cmds=$lt_postuninstall_cmds
# Commands used to finish a libtool library installation in a directory.
finish_cmds=$lt_finish_cmds
# As "finish_cmds", except a single script fragment to be evaled but
# not shown.
finish_eval=$lt_finish_eval
# Whether we should hardcode library paths into libraries.
hardcode_into_libs=$hardcode_into_libs
# Compile-time system search path for libraries.
sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
# Detected run-time system search path for libraries.
sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path
# Explicit LT_SYS_LIBRARY_PATH set during ./configure time.
configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path
# Whether dlopen is supported.
dlopen_support=$enable_dlopen
# Whether dlopen of programs is supported.
dlopen_self=$enable_dlopen_self
# Whether dlopen of statically linked programs is supported.
dlopen_self_static=$enable_dlopen_self_static
# Commands to strip libraries.
old_striplib=$lt_old_striplib
striplib=$lt_striplib
# The linker used to build libraries.
LD=$lt_LD
# How to create reloadable object files.
reload_flag=$lt_reload_flag
reload_cmds=$lt_reload_cmds
# Commands used to build an old-style archive.
old_archive_cmds=$lt_old_archive_cmds
# A language specific compiler.
CC=$lt_compiler
# Is the compiler the GNU compiler?
with_gcc=$GCC
# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
# Additional compiler flags for building library objects.
pic_flag=$lt_lt_prog_compiler_pic
# How to pass a linker flag through the compiler.
wl=$lt_lt_prog_compiler_wl
# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_lt_prog_compiler_static
# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o
# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=$archive_cmds_need_lc
# Whether or not to disallow shared libs when runtime libs are static.
allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec=$lt_whole_archive_flag_spec
# Whether the compiler copes with passing no objects directly.
compiler_needs_object=$lt_compiler_needs_object
# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
# Commands used to build a shared archive.
archive_cmds=$lt_archive_cmds
archive_expsym_cmds=$lt_archive_expsym_cmds
# Commands used to build a loadable module if different from building
# a shared archive.
module_cmds=$lt_module_cmds
module_expsym_cmds=$lt_module_expsym_cmds
# Whether we are building with GNU ld or not.
with_gnu_ld=$lt_with_gnu_ld
# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=$lt_allow_undefined_flag
# Flag that enforces no undefined symbols.
no_undefined_flag=$lt_no_undefined_flag
# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist
hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
# Whether we need a single "-rpath" flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator
# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary.
hardcode_direct=$hardcode_direct
# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary and the resulting library dependency is
# "absolute",i.e impossible to change by setting \$shlibpath_var if the
# library is relocated.
hardcode_direct_absolute=$hardcode_direct_absolute
# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
# into the resulting binary.
hardcode_minus_L=$hardcode_minus_L
# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
# into the resulting binary.
hardcode_shlibpath_var=$hardcode_shlibpath_var
# Set to "yes" if building a shared library automatically hardcodes DIR
# into the library and all subsequent libraries and executables linked
# against it.
hardcode_automatic=$hardcode_automatic
# Set to yes if linker adds runtime paths of dependent libraries
# to runtime path list.
inherit_rpath=$inherit_rpath
# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs
# Set to "yes" if exported symbols are required.
always_export_symbols=$always_export_symbols
# The commands to list exported symbols.
export_symbols_cmds=$lt_export_symbols_cmds
# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=$lt_exclude_expsyms
# Symbols that must always be exported.
include_expsyms=$lt_include_expsyms
# Commands necessary for linking programs (against libraries) with templates.
prelink_cmds=$lt_prelink_cmds
# Commands necessary for finishing linking programs.
postlink_cmds=$lt_postlink_cmds
# Specify filename containing input files.
file_list_spec=$lt_file_list_spec
# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action
# The directories searched by this compiler when creating a shared library.
compiler_lib_search_dirs=$lt_compiler_lib_search_dirs
# Dependencies to place before and after the objects being linked to
# create a shared library.
predep_objects=$lt_predep_objects
postdep_objects=$lt_postdep_objects
predeps=$lt_predeps
postdeps=$lt_postdeps
# The library search path used internally by the compiler when linking
# a shared library.
compiler_lib_search_path=$lt_compiler_lib_search_path
# ### END LIBTOOL CONFIG
_LT_EOF
cat <<'_LT_EOF' >> "$cfgfile"
# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
# func_munge_path_list VARIABLE PATH
# -----------------------------------
# VARIABLE is name of variable containing _space_ separated list of
# directories to be munged by the contents of PATH, which is string
# having a format:
# "DIR[:DIR]:"
# string "DIR[ DIR]" will be prepended to VARIABLE
# ":DIR[:DIR]"
# string "DIR[ DIR]" will be appended to VARIABLE
# "DIRP[:DIRP]::[DIRA:]DIRA"
# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
# "DIRA[ DIRA]" will be appended to VARIABLE
# "DIR[:DIR]"
# VARIABLE will be replaced by "DIR[ DIR]"
func_munge_path_list ()
{
case x$2 in
x)
;;
*:)
eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
;;
x:*)
eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
;;
*::*)
eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
;;
*)
eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
;;
esac
}
# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
func_cc_basename ()
{
for cc_temp in $*""; do
case $cc_temp in
compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
\-*) ;;
*) break;;
esac
done
func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
}
# ### END FUNCTIONS SHARED WITH CONFIGURE
_LT_EOF
case $host_os in
aix3*)
cat <<\_LT_EOF >> "$cfgfile"
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
_LT_EOF
;;
esac
ltmain=$ac_aux_dir/ltmain.sh
# We use sed instead of cat because bash on DJGPP gets confused if
# if finds mixed CR/LF and LF-only lines. Since sed operates in
# text mode, it properly converts lines to CR/LF. This bash problem
# is reportedly fixed, but why not run on old versions too?
sed '$q' "$ltmain" >> "$cfgfile" \
|| (rm -f "$cfgfile"; exit 1)
mv -f "$cfgfile" "$ofile" ||
(rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
chmod +x "$ofile"
cat <<_LT_EOF >> "$ofile"
# ### BEGIN LIBTOOL TAG CONFIG: CXX
# The linker used to build libraries.
LD=$lt_LD_CXX
# How to create reloadable object files.
reload_flag=$lt_reload_flag_CXX
reload_cmds=$lt_reload_cmds_CXX
# Commands used to build an old-style archive.
old_archive_cmds=$lt_old_archive_cmds_CXX
# A language specific compiler.
CC=$lt_compiler_CXX
# Is the compiler the GNU compiler?
with_gcc=$GCC_CXX
# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
# Additional compiler flags for building library objects.
pic_flag=$lt_lt_prog_compiler_pic_CXX
# How to pass a linker flag through the compiler.
wl=$lt_lt_prog_compiler_wl_CXX
# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_lt_prog_compiler_static_CXX
# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=$archive_cmds_need_lc_CXX
# Whether or not to disallow shared libs when runtime libs are static.
allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
# Whether the compiler copes with passing no objects directly.
compiler_needs_object=$lt_compiler_needs_object_CXX
# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
# Commands used to build a shared archive.
archive_cmds=$lt_archive_cmds_CXX
archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
# Commands used to build a loadable module if different from building
# a shared archive.
module_cmds=$lt_module_cmds_CXX
module_expsym_cmds=$lt_module_expsym_cmds_CXX
# Whether we are building with GNU ld or not.
with_gnu_ld=$lt_with_gnu_ld_CXX
# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=$lt_allow_undefined_flag_CXX
# Flag that enforces no undefined symbols.
no_undefined_flag=$lt_no_undefined_flag_CXX
# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist
hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
# Whether we need a single "-rpath" flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary.
hardcode_direct=$hardcode_direct_CXX
# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary and the resulting library dependency is
# "absolute",i.e impossible to change by setting \$shlibpath_var if the
# library is relocated.
hardcode_direct_absolute=$hardcode_direct_absolute_CXX
# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
# into the resulting binary.
hardcode_minus_L=$hardcode_minus_L_CXX
# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
# into the resulting binary.
hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
# Set to "yes" if building a shared library automatically hardcodes DIR
# into the library and all subsequent libraries and executables linked
# against it.
hardcode_automatic=$hardcode_automatic_CXX
# Set to yes if linker adds runtime paths of dependent libraries
# to runtime path list.
inherit_rpath=$inherit_rpath_CXX
# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs_CXX
# Set to "yes" if exported symbols are required.
always_export_symbols=$always_export_symbols_CXX
# The commands to list exported symbols.
export_symbols_cmds=$lt_export_symbols_cmds_CXX
# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=$lt_exclude_expsyms_CXX
# Symbols that must always be exported.
include_expsyms=$lt_include_expsyms_CXX
# Commands necessary for linking programs (against libraries) with templates.
prelink_cmds=$lt_prelink_cmds_CXX
# Commands necessary for finishing linking programs.
postlink_cmds=$lt_postlink_cmds_CXX
# Specify filename containing input files.
file_list_spec=$lt_file_list_spec_CXX
# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action_CXX
# The directories searched by this compiler when creating a shared library.
compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX
# Dependencies to place before and after the objects being linked to
# create a shared library.
predep_objects=$lt_predep_objects_CXX
postdep_objects=$lt_postdep_objects_CXX
predeps=$lt_predeps_CXX
postdeps=$lt_postdeps_CXX
# The library search path used internally by the compiler when linking
# a shared library.
compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
# ### END LIBTOOL TAG CONFIG: CXX
_LT_EOF
;;
"po-directories":C)
for ac_file in $CONFIG_FILES; do
# Support "outfile[:infile[:infile...]]"
case "$ac_file" in
*:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
esac
# PO directories have a Makefile.in generated from Makefile.in.in.
case "$ac_file" in */Makefile.in)
# Adjust a relative srcdir.
ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'`
ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
# In autoconf-2.13 it is called $ac_given_srcdir.
# In autoconf-2.50 it is called $srcdir.
test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
case "$ac_given_srcdir" in
.) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
/*) top_srcdir="$ac_given_srcdir" ;;
*) top_srcdir="$ac_dots$ac_given_srcdir" ;;
esac
# Treat a directory as a PO directory if and only if it has a
# POTFILES.in file. This allows packages to have multiple PO
# directories under different names or in different locations.
if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
rm -f "$ac_dir/POTFILES"
test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
gt_tab=`printf '\t'`
cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
POMAKEFILEDEPS="POTFILES.in"
# ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
# on $ac_dir but don't depend on user-specified configuration
# parameters.
if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
# The LINGUAS file contains the set of available languages.
if test -n "$OBSOLETE_ALL_LINGUAS"; then
test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
fi
ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
# Hide the ALL_LINGUAS assignment from automake < 1.5.
eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
else
# The set of available languages was given in configure.in.
# Hide the ALL_LINGUAS assignment from automake < 1.5.
eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
fi
# Compute POFILES
# as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
# Compute UPDATEPOFILES
# as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
# Compute DUMMYPOFILES
# as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
# Compute GMOFILES
# as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
case "$ac_given_srcdir" in
.) srcdirpre= ;;
*) srcdirpre='$(srcdir)/' ;;
esac
POFILES=
UPDATEPOFILES=
DUMMYPOFILES=
GMOFILES=
for lang in $ALL_LINGUAS; do
POFILES="$POFILES $srcdirpre$lang.po"
UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
done
# CATALOGS depends on both $ac_dir and the user's LINGUAS
# environment variable.
INST_LINGUAS=
if test -n "$ALL_LINGUAS"; then
for presentlang in $ALL_LINGUAS; do
useit=no
if test "%UNSET%" != "$LINGUAS"; then
desiredlanguages="$LINGUAS"
else
desiredlanguages="$ALL_LINGUAS"
fi
for desiredlang in $desiredlanguages; do
# Use the presentlang catalog if desiredlang is
# a. equal to presentlang, or
# b. a variant of presentlang (because in this case,
# presentlang can be used as a fallback for messages
# which are not translated in the desiredlang catalog).
case "$desiredlang" in
"$presentlang"*) useit=yes;;
esac
done
if test $useit = yes; then
INST_LINGUAS="$INST_LINGUAS $presentlang"
fi
done
fi
CATALOGS=
if test -n "$INST_LINGUAS"; then
for lang in $INST_LINGUAS; do
CATALOGS="$CATALOGS $lang.gmo"
done
fi
test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
if test -f "$f"; then
case "$f" in
*.orig | *.bak | *~) ;;
*) cat "$f" >> "$ac_dir/Makefile" ;;
esac
fi
done
fi
;;
esac
done ;;
"$ac_stdint_h":C)
{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_stdint_h : $_ac_stdint_h" >&5
$as_echo "$as_me: creating $ac_stdint_h : $_ac_stdint_h" >&6;}
ac_stdint=$tmp/_stdint.h
echo "#ifndef" $_ac_stdint_h >$ac_stdint
echo "#define" $_ac_stdint_h "1" >>$ac_stdint
echo "#ifndef" _GENERATED_STDINT_H >>$ac_stdint
echo "#define" _GENERATED_STDINT_H '"'$PACKAGE $VERSION'"' >>$ac_stdint
echo "/* generated $ac_cv_stdint_message */" >>$ac_stdint
if test "_$ac_cv_header_stdint_t" != "_" ; then
echo "#define _STDINT_HAVE_STDINT_H" "1" >>$ac_stdint
echo "#include <stdint.h>" >>$ac_stdint
echo "#endif" >>$ac_stdint
echo "#endif" >>$ac_stdint
else
cat >>$ac_stdint <<STDINT_EOF
/* ................... shortcircuit part ........................... */
#if defined HAVE_STDINT_H || defined _STDINT_HAVE_STDINT_H
#include <stdint.h>
#else
#include <stddef.h>
/* .................... configured part ............................ */
STDINT_EOF
echo "/* whether we have a C99 compatible stdint header file */" >>$ac_stdint
if test "_$ac_cv_header_stdint_x" != "_" ; then
ac_header="$ac_cv_header_stdint_x"
echo "#define _STDINT_HEADER_INTPTR" '"'"$ac_header"'"' >>$ac_stdint
else
echo "/* #undef _STDINT_HEADER_INTPTR */" >>$ac_stdint
fi
echo "/* whether we have a C96 compatible inttypes header file */" >>$ac_stdint
if test "_$ac_cv_header_stdint_o" != "_" ; then
ac_header="$ac_cv_header_stdint_o"
echo "#define _STDINT_HEADER_UINT32" '"'"$ac_header"'"' >>$ac_stdint
else
echo "/* #undef _STDINT_HEADER_UINT32 */" >>$ac_stdint
fi
echo "/* whether we have a BSD compatible inet types header */" >>$ac_stdint
if test "_$ac_cv_header_stdint_u" != "_" ; then
ac_header="$ac_cv_header_stdint_u"
echo "#define _STDINT_HEADER_U_INT32" '"'"$ac_header"'"' >>$ac_stdint
else
echo "/* #undef _STDINT_HEADER_U_INT32 */" >>$ac_stdint
fi
echo "" >>$ac_stdint
if test "_$ac_header" != "_" ; then if test "$ac_header" != "stddef.h" ; then
echo "#include <$ac_header>" >>$ac_stdint
echo "" >>$ac_stdint
fi fi
echo "/* which 64bit typedef has been found */" >>$ac_stdint
if test "$ac_cv_type_uint64_t" = "yes" ; then
echo "#define _STDINT_HAVE_UINT64_T" "1" >>$ac_stdint
else
echo "/* #undef _STDINT_HAVE_UINT64_T */" >>$ac_stdint
fi
if test "$ac_cv_type_u_int64_t" = "yes" ; then
echo "#define _STDINT_HAVE_U_INT64_T" "1" >>$ac_stdint
else
echo "/* #undef _STDINT_HAVE_U_INT64_T */" >>$ac_stdint
fi
echo "" >>$ac_stdint
echo "/* which type model has been detected */" >>$ac_stdint
if test "_$ac_cv_char_data_model" != "_" ; then
echo "#define _STDINT_CHAR_MODEL" "$ac_cv_char_data_model" >>$ac_stdint
echo "#define _STDINT_LONG_MODEL" "$ac_cv_long_data_model" >>$ac_stdint
else
echo "/* #undef _STDINT_CHAR_MODEL // skipped */" >>$ac_stdint
echo "/* #undef _STDINT_LONG_MODEL // skipped */" >>$ac_stdint
fi
echo "" >>$ac_stdint
echo "/* whether int_least types were detected */" >>$ac_stdint
if test "$ac_cv_type_int_least32_t" = "yes"; then
echo "#define _STDINT_HAVE_INT_LEAST32_T" "1" >>$ac_stdint
else
echo "/* #undef _STDINT_HAVE_INT_LEAST32_T */" >>$ac_stdint
fi
echo "/* whether int_fast types were detected */" >>$ac_stdint
if test "$ac_cv_type_int_fast32_t" = "yes"; then
echo "#define _STDINT_HAVE_INT_FAST32_T" "1" >>$ac_stdint
else
echo "/* #undef _STDINT_HAVE_INT_FAST32_T */" >>$ac_stdint
fi
echo "/* whether intmax_t type was detected */" >>$ac_stdint
if test "$ac_cv_type_intmax_t" = "yes"; then
echo "#define _STDINT_HAVE_INTMAX_T" "1" >>$ac_stdint
else
echo "/* #undef _STDINT_HAVE_INTMAX_T */" >>$ac_stdint
fi
echo "" >>$ac_stdint
cat >>$ac_stdint <<STDINT_EOF
/* .................... detections part ............................ */
/* whether we need to define bit specific types from compiler base types */
#ifndef _STDINT_HEADER_INTPTR
#ifndef _STDINT_HEADER_UINT32
#ifndef _STDINT_HEADER_U_INT32
#define _STDINT_NEED_INT_MODEL_T
#else
#define _STDINT_HAVE_U_INT_TYPES
#endif
#endif
#endif
#ifdef _STDINT_HAVE_U_INT_TYPES
#undef _STDINT_NEED_INT_MODEL_T
#endif
#ifdef _STDINT_CHAR_MODEL
#if _STDINT_CHAR_MODEL+0 == 122 || _STDINT_CHAR_MODEL+0 == 124
#ifndef _STDINT_BYTE_MODEL
#define _STDINT_BYTE_MODEL 12
#endif
#endif
#endif
#ifndef _STDINT_HAVE_INT_LEAST32_T
#define _STDINT_NEED_INT_LEAST_T
#endif
#ifndef _STDINT_HAVE_INT_FAST32_T
#define _STDINT_NEED_INT_FAST_T
#endif
#ifndef _STDINT_HEADER_INTPTR
#define _STDINT_NEED_INTPTR_T
#ifndef _STDINT_HAVE_INTMAX_T
#define _STDINT_NEED_INTMAX_T
#endif
#endif
/* .................... definition part ............................ */
/* some system headers have good uint64_t */
#ifndef _HAVE_UINT64_T
#if defined _STDINT_HAVE_UINT64_T || defined HAVE_UINT64_T
#define _HAVE_UINT64_T
#elif defined _STDINT_HAVE_U_INT64_T || defined HAVE_U_INT64_T
#define _HAVE_UINT64_T
typedef u_int64_t uint64_t;
#endif
#endif
#ifndef _HAVE_UINT64_T
/* .. here are some common heuristics using compiler runtime specifics */
#if defined __STDC_VERSION__ && defined __STDC_VERSION__ >= 199901L
#define _HAVE_UINT64_T
#define _HAVE_LONGLONG_UINT64_T
typedef long long int64_t;
typedef unsigned long long uint64_t;
#elif !defined __STRICT_ANSI__
#if defined _MSC_VER || defined __WATCOMC__ || defined __BORLANDC__
#define _HAVE_UINT64_T
typedef __int64 int64_t;
typedef unsigned __int64 uint64_t;
#elif defined __GNUC__ || defined __MWERKS__ || defined __ELF__
/* note: all ELF-systems seem to have loff-support which needs 64-bit */
#if !defined _NO_LONGLONG
#define _HAVE_UINT64_T
#define _HAVE_LONGLONG_UINT64_T
typedef long long int64_t;
typedef unsigned long long uint64_t;
#endif
#elif defined __alpha || (defined __mips && defined _ABIN32)
#if !defined _NO_LONGLONG
typedef long int64_t;
typedef unsigned long uint64_t;
#endif
/* compiler/cpu type to define int64_t */
#endif
#endif
#endif
#if defined _STDINT_HAVE_U_INT_TYPES
/* int8_t int16_t int32_t defined by inet code, redeclare the u_intXX types */
typedef u_int8_t uint8_t;
typedef u_int16_t uint16_t;
typedef u_int32_t uint32_t;
/* glibc compatibility */
#ifndef __int8_t_defined
#define __int8_t_defined
#endif
#endif
#ifdef _STDINT_NEED_INT_MODEL_T
/* we must guess all the basic types. Apart from byte-addressable system, */
/* there a few 32-bit-only dsp-systems that we guard with BYTE_MODEL 8-} */
/* (btw, those nibble-addressable systems are way off, or so we assume) */
#if defined _STDINT_BYTE_MODEL
#if _STDINT_LONG_MODEL+0 == 242
/* 2:4:2 = IP16 = a normal 16-bit system */
typedef unsigned char uint8_t;
typedef unsigned short uint16_t;
typedef unsigned long uint32_t;
#ifndef __int8_t_defined
#define __int8_t_defined
typedef char int8_t;
typedef short int16_t;
typedef long int32_t;
#endif
#elif _STDINT_LONG_MODEL+0 == 244 || _STDINT_LONG_MODEL == 444
/* 2:4:4 = LP32 = a 32-bit system derived from a 16-bit */
/* 4:4:4 = ILP32 = a normal 32-bit system */
typedef unsigned char uint8_t;
typedef unsigned short uint16_t;
typedef unsigned int uint32_t;
#ifndef __int8_t_defined
#define __int8_t_defined
typedef char int8_t;
typedef short int16_t;
typedef int int32_t;
#endif
#elif _STDINT_LONG_MODEL+0 == 484 || _STDINT_LONG_MODEL+0 == 488
/* 4:8:4 = IP32 = a 32-bit system prepared for 64-bit */
/* 4:8:8 = LP64 = a normal 64-bit system */
typedef unsigned char uint8_t;
typedef unsigned short uint16_t;
typedef unsigned int uint32_t;
#ifndef __int8_t_defined
#define __int8_t_defined
typedef char int8_t;
typedef short int16_t;
typedef int int32_t;
#endif
/* this system has a "long" of 64bit */
#ifndef _HAVE_UINT64_T
#define _HAVE_UINT64_T
typedef unsigned long uint64_t;
typedef long int64_t;
#endif
#elif _STDINT_LONG_MODEL+0 == 448
/* LLP64 a 64-bit system derived from a 32-bit system */
typedef unsigned char uint8_t;
typedef unsigned short uint16_t;
typedef unsigned int uint32_t;
#ifndef __int8_t_defined
#define __int8_t_defined
typedef char int8_t;
typedef short int16_t;
typedef int int32_t;
#endif
/* assuming the system has a "long long" */
#ifndef _HAVE_UINT64_T
#define _HAVE_UINT64_T
#define _HAVE_LONGLONG_UINT64_T
typedef unsigned long long uint64_t;
typedef long long int64_t;
#endif
#else
#define _STDINT_NO_INT32_T
#endif
#else
#define _STDINT_NO_INT8_T
#define _STDINT_NO_INT32_T
#endif
#endif
/*
* quote from SunOS-5.8 sys/inttypes.h:
* Use at your own risk. As of February 1996, the committee is squarely
* behind the fixed sized types; the "least" and "fast" types are still being
* discussed. The probability that the "fast" types may be removed before
* the standard is finalized is high enough that they are not currently
* implemented.
*/
#if defined _STDINT_NEED_INT_LEAST_T
typedef int8_t int_least8_t;
typedef int16_t int_least16_t;
typedef int32_t int_least32_t;
#ifdef _HAVE_UINT64_T
typedef int64_t int_least64_t;
#endif
typedef uint8_t uint_least8_t;
typedef uint16_t uint_least16_t;
typedef uint32_t uint_least32_t;
#ifdef _HAVE_UINT64_T
typedef uint64_t uint_least64_t;
#endif
/* least types */
#endif
#if defined _STDINT_NEED_INT_FAST_T
typedef int8_t int_fast8_t;
typedef int int_fast16_t;
typedef int32_t int_fast32_t;
#ifdef _HAVE_UINT64_T
typedef int64_t int_fast64_t;
#endif
typedef uint8_t uint_fast8_t;
typedef unsigned uint_fast16_t;
typedef uint32_t uint_fast32_t;
#ifdef _HAVE_UINT64_T
typedef uint64_t uint_fast64_t;
#endif
/* fast types */
#endif
#ifdef _STDINT_NEED_INTMAX_T
#ifdef _HAVE_UINT64_T
typedef int64_t intmax_t;
typedef uint64_t uintmax_t;
#else
typedef long intmax_t;
typedef unsigned long uintmax_t;
#endif
#endif
#ifdef _STDINT_NEED_INTPTR_T
#ifndef __intptr_t_defined
#define __intptr_t_defined
/* we encourage using "long" to store pointer values, never use "int" ! */
#if _STDINT_LONG_MODEL+0 == 242 || _STDINT_LONG_MODEL+0 == 484
typedef unsigned int uintptr_t;
typedef int intptr_t;
#elif _STDINT_LONG_MODEL+0 == 244 || _STDINT_LONG_MODEL+0 == 444
typedef unsigned long uintptr_t;
typedef long intptr_t;
#elif _STDINT_LONG_MODEL+0 == 448 && defined _HAVE_UINT64_T
typedef uint64_t uintptr_t;
typedef int64_t intptr_t;
#else /* matches typical system types ILP32 and LP64 - but not IP16 or LLP64 */
typedef unsigned long uintptr_t;
typedef long intptr_t;
#endif
#endif
#endif
/* The ISO C99 standard specifies that in C++ implementations these
should only be defined if explicitly requested. */
#if !defined __cplusplus || defined __STDC_CONSTANT_MACROS
#ifndef UINT32_C
/* Signed. */
# define INT8_C(c) c
# define INT16_C(c) c
# define INT32_C(c) c
# ifdef _HAVE_LONGLONG_UINT64_T
# define INT64_C(c) c ## L
# else
# define INT64_C(c) c ## LL
# endif
/* Unsigned. */
# define UINT8_C(c) c ## U
# define UINT16_C(c) c ## U
# define UINT32_C(c) c ## U
# ifdef _HAVE_LONGLONG_UINT64_T
# define UINT64_C(c) c ## UL
# else
# define UINT64_C(c) c ## ULL
# endif
/* Maximal type. */
# ifdef _HAVE_LONGLONG_UINT64_T
# define INTMAX_C(c) c ## L
# define UINTMAX_C(c) c ## UL
# else
# define INTMAX_C(c) c ## LL
# define UINTMAX_C(c) c ## ULL
# endif
/* literalnumbers */
#endif
#endif
/* These limits are merrily those of a two complement byte-oriented system */
/* Minimum of signed integral types. */
# define INT8_MIN (-128)
# define INT16_MIN (-32767-1)
# define INT32_MIN (-2147483647-1)
# define INT64_MIN (-__INT64_C(9223372036854775807)-1)
/* Maximum of signed integral types. */
# define INT8_MAX (127)
# define INT16_MAX (32767)
# define INT32_MAX (2147483647)
# define INT64_MAX (__INT64_C(9223372036854775807))
/* Maximum of unsigned integral types. */
# define UINT8_MAX (255)
# define UINT16_MAX (65535)
# define UINT32_MAX (4294967295U)
# define UINT64_MAX (__UINT64_C(18446744073709551615))
/* Minimum of signed integral types having a minimum size. */
# define INT_LEAST8_MIN INT8_MIN
# define INT_LEAST16_MIN INT16_MIN
# define INT_LEAST32_MIN INT32_MIN
# define INT_LEAST64_MIN INT64_MIN
/* Maximum of signed integral types having a minimum size. */
# define INT_LEAST8_MAX INT8_MAX
# define INT_LEAST16_MAX INT16_MAX
# define INT_LEAST32_MAX INT32_MAX
# define INT_LEAST64_MAX INT64_MAX
/* Maximum of unsigned integral types having a minimum size. */
# define UINT_LEAST8_MAX UINT8_MAX
# define UINT_LEAST16_MAX UINT16_MAX
# define UINT_LEAST32_MAX UINT32_MAX
# define UINT_LEAST64_MAX UINT64_MAX
/* shortcircuit*/
#endif
/* once */
#endif
#endif
STDINT_EOF
fi
if cmp -s $ac_stdint_h $ac_stdint 2>/dev/null; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: $ac_stdint_h is unchanged" >&5
$as_echo "$as_me: $ac_stdint_h is unchanged" >&6;}
else
ac_dir=`$as_dirname -- "$ac_stdint_h" ||
$as_expr X"$ac_stdint_h" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$ac_stdint_h" : 'X\(//\)[^/]' \| \
X"$ac_stdint_h" : 'X\(//\)$' \| \
X"$ac_stdint_h" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$ac_stdint_h" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
as_dir="$ac_dir"; as_fn_mkdir_p
rm -f $ac_stdint_h
mv $ac_stdint $ac_stdint_h
fi
;;
"tools/sane-config":F) chmod a+x tools/sane-config ;;
esac
done # for ac_tag
as_fn_exit 0
--------------------------------- End ----------------------------------
More information about the sane-devel
mailing list