[sane-devel] Fujitsu fi-6130: x-offset duplex

Ulf Zibis Ulf.Zibis at gmx.de
Sun Mar 22 15:02:10 GMT 2020

See also:


Am 08.03.20 um 18:45 schrieb Max Voit:
> Dear all,
> I've been trying to duplex scan A4 paper with the fi-6130. Setting
> "page-size" and "page-width" accordingly was not sufficient. There is
> about 2mm empty (grey) space on the right hand side for the front page,
> on the left for the back. And the bottom is cut off by about 1cm.
> After some tweaking I've found a parameter set that works for
> the front page:
> scanimage --mode Color --resolution 300 \
>      --batch-count=2 --batch=%d.pnm --batch-start=0 \
>      --source "ADF Duplex" --buffermode On \
>      --page-width 212.5 -x 210 --page-height 299 -y 297
> However, then the back side has about 4mm empty space on the
> left and is cut off on the right.
> Can you please give me some hints on how to best resolve this issue?
> Is there something similar to the duplex-offset option but in
> x-direction?
> Best regards,
> Max

More information about the sane-devel mailing list