[sane-devel] Fujitsu fi-6130: x-offset duplex

[m. allan noah]

Interesting, but unrelated.

allan

On Sun, Mar 22, 2020 at 11:14 AM Ulf Zibis <Ulf.Zibis at gmx.de> wrote:
>
> See also:
> https://gitlab.com/utsushi/utsushi/issues/68
> https://bugs.launchpad.net/ubuntu/+source/simple-scan/+bug/1828638
> https://gitlab.com/sane-project/frontend/xsane/issues/1
> https://gitlab.gnome.org/GNOME/simple-scan/issues/103#note_510586
>
> -Ulf
>
> Am 08.03.20 um 18:45 schrieb Max Voit:
> > Dear all,
> >
> > I've been trying to duplex scan A4 paper with the fi-6130. Setting
> > "page-size" and "page-width" accordingly was not sufficient. There is
> > about 2mm empty (grey) space on the right hand side for the front page,
> > on the left for the back. And the bottom is cut off by about 1cm.
> >
> > After some tweaking I've found a parameter set that works for
> > the front page:
> >
> > scanimage --mode Color --resolution 300 \
> >      --batch-count=2 --batch=%d.pnm --batch-start=0 \
> >      --source "ADF Duplex" --buffermode On \
> >      --page-width 212.5 -x 210 --page-height 299 -y 297
> >
> > However, then the back side has about 4mm empty space on the
> > left and is cut off on the right.
> >
> > Can you please give me some hints on how to best resolve this issue?
> >
> > Is there something similar to the duplex-offset option but in
> > x-direction?
> >
> > Best regards,
> > Max
> >
>


-- 
"well, I stand up next to a mountain- and I chop it down with the edge
of my hand"