[sane-devel] scanbd with Fujitsu fi-7260 Scanner: need help

[Dirk Meier]

Am Freitag, 6. Juni 2025, 01:27:10 CEST schrieb Tricia:
> Hi, Dirk.
> 
> On Thu, Jun 05, 2025 at 01:25:42PM -0700, Dirk Meier via sane-devel wrote:
> > I have tried the following filters: “2”, “.*2.*”, “^2.*”, “.*2$” none of
> > them worked. Only when I use “.*” as a filter is the assigned script
> > executed. But continuously.
> 
> I think your filter should be something like "^function$", and then
> you'd use a `numerical-trigger` block to specify which transitions you
> want to trigger on.
> 
> `filter` controls, in effect, the name of the variable; not what values
> to trigger on.
> 
> If this doesn't get you anywhere, perhaps you can include both the full
> output of `scanimage -A` and the full output of scanbd logs, making sure
> you adjust the switch while it's running?
> 
> - Tricia

Hello Tricia,
attached are two files output of scanimage -A with function wheel set to #2 and 
output of scanbd -f -d7 with wheel set to #2 and pressed scan-button.
Scanner has wheel for function number 0-9 which ist shown in scanimage -A and 
has separate pushbutton "scan". But scanimage -A shows only "no" for scan 
button even if it is pressed before scanimage -A.
I am confused how to filter.

-- 
Dirk
-------------- next part --------------
All options specific to device `fujitsu:fi-7280:1201263':
  Standard:
    --source Flatbed|ADF Front|ADF Back|ADF Duplex [Flatbed]
        Selects the scan source (such as a document-feeder).
    --mode Lineart|Halftone|Gray|Color [Lineart]
        Selects the scan mode (e.g., lineart, monochrome, or color).
    --resolution 50..600dpi (in steps of 1) [600]
        Sets the resolution of the scanned image.
  Geometry:
    --page-width 0..224.846mm (in steps of 0.0211639) [inactive]
        Specifies the width of the media.  Required for automatic centering of
        sheet-fed scans.
    --page-height 0..2750.47mm (in steps of 0.0211639) [inactive]
        Specifies the height of the media.
    -l 0..227.809mm (in steps of 0.0211639) [0]
        Top-left x position of scan area.
    -t 0..296.972mm (in steps of 0.0211639) [0]
        Top-left y position of scan area.
    -x 0..227.809mm (in steps of 0.0211639) [215.872]
        Width of scan-area.
    -y 0..296.972mm (in steps of 0.0211639) [279.364]
        Height of scan-area.
  Enhancement:
    --brightness -127..127 (in steps of 1) [0]
        Controls the brightness of the acquired image.
    --contrast -127..127 (in steps of 1) [0]
        Controls the contrast of the acquired image.
    --threshold 0..255 (in steps of 1) [0]
        Select minimum-brightness to get a white point
    --rif[=(yes|no)] [no]
        Reverse image format
    --ht-type Default|Dither|Diffusion [inactive]
        Control type of halftone filter
    --ht-pattern 0..3 (in steps of 1) [inactive]
        Control pattern of halftone filter
    --emphasis -128..127 (in steps of 1) [0]
        Negative to smooth or positive to sharpen image
    --variance 0..255 (in steps of 1) [0]
        Set SDTC variance rate (sensitivity), 0 equals 127
  Advanced:
    --ald[=(yes|no)] [no]
        Scanner detects paper lower edge. May confuse some frontends.
    --df-action Default|Continue|Stop [Default]
        Action following double feed error
    --df-skew[=(yes|no)] [inactive]
        Enable double feed error due to skew
    --df-thickness[=(yes|no)] [inactive]
        Enable double feed error due to paper thickness
    --df-length[=(yes|no)] [inactive]
        Enable double feed error due to paper length
    --df-diff Default|10mm|15mm|20mm [inactive]
        Difference in page length to trigger double feed error
    --df-recovery Default|Off|On [On]
        Request scanner to reverse feed on paper jam
    --paper-protect Default|Off|On [On]
        Request scanner to predict jams in the ADF
    --adv-paper-protect Default|Off|On [On]
        Request scanner to predict jams in the ADF using improved sensors
    --bgcolor Default|White|Black [Default]
        Set color of background for scans. May conflict with overscan option
    --dropoutcolor Default|Red|Green|Blue [Default]
        One-pass scanners use only one color during gray or binary scanning,
        useful for colored paper or ink
    --buffermode Default|Off|On [Off]
        Request scanner to read pages quickly from ADF into internal memory
    --prepick Default|Off|On [Default]
        Request scanner to grab next page from ADF
    --overscan Default|Off|On [Default]
        Collect a few mm of background on top side of scan, before paper
        enters ADF, and increase maximum scan area beyond paper size, to allow
        collection on remaining sides. May conflict with bgcolor option
    --sleeptimer 0..60 (in steps of 1) [0]
        Time in minutes until the internal power supply switches to sleep mode
    --offtimer 0..960 (in steps of 1) [240]
        Time in minutes until the internal power supply switches the scanner
        off. Will be rounded to nearest 15 minutes. Zero means never power off.
    --lowmemory[=(yes|no)] [no]
        Limit driver memory usage for use in embedded systems. Causes some
        duplex transfers to alternate sides on each call to sane_read. Value of
        option 'side' can be used to determine correct image. This option
        should only be used with custom front-end software.
    --side[=(yes|no)] [no] [read-only]
        Tells which side (0=front, 1=back) of a duplex scan the next call to
        sane_read will return.
    --hwdeskewcrop[=(yes|no)] [no]
        Request scanner to rotate and crop pages digitally.
    --swdeskew[=(yes|no)] [no]
        Request driver to rotate skewed pages digitally.
    --swdespeck 0..9 (in steps of 1) [0]
        Maximum diameter of lone dots to remove from scan.
    --swcrop[=(yes|no)] [no]
        Request driver to remove border from pages digitally.
    --swskip 0..100% (in steps of 0.100006) [0]
        Request driver to discard pages with low percentage of dark pixels
  Sensors:
    --top-edge[=(yes|no)] [no] [hardware]
        Paper is pulled partly into ADF
    --a3-paper[=(yes|no)] [no] [hardware]
        A3 paper detected
    --b4-paper[=(yes|no)] [no] [hardware]
        B4 paper detected
    --a4-paper[=(yes|no)] [no] [hardware]
        A4 paper detected
    --b5-paper[=(yes|no)] [no] [hardware]
        B5 paper detected
    --page-loaded[=(yes|no)] [no] [hardware]
        Page loaded
    --omr-df[=(yes|no)] [no] [hardware]
        OMR or double feed detected
    --cover-open[=(yes|no)] [no] [hardware]
        Cover open
    --power-save[=(yes|no)] [no] [hardware]
        Scanner in power saving mode
    --email[=(yes|no)] [no] [hardware]
        Email button
    --manual-feed[=(yes|no)] [no] [hardware]
        Manual feed selected
    --scan[=(yes|no)] [no] [hardware]
        Scan button
    --function <int> [2] [hardware]
        Function character on screen
    --double-feed[=(yes|no)] [no] [hardware]
        Double feed detected
    --error-code <int> [0] [hardware]
        Hardware error code
    --skew-angle <int> [0] [hardware]
        Requires black background for scanning

-------------- next part --------------
scanbd: reading config file /etc/scanbd/scanbd.conf
scanbd: debug on: level: 7
scanbd: dropping privs to uid saned
scanbd: dropping privs to gid lp
scanbd: drop privileges to gid: 487
scanbd: Running as effective gid 487
scanbd: drop privileges to uid: 100
scanbd: Running as effective uid 100
scanbd: dbus_init
scanbd: dbus match type='signal',interface='org.freedesktop.Hal.Manager'
scanbd: SANE_CONFIG_DIR not set
scanbd: sane version 1.0
scanbd: Scanning for local-only devices
scanbd: found device: fujitsu:fi-7280:1201263 FUJITSU fi-7280 scanner
scanbd: start_sane_threads
scanbd: Starting poll thread for fujitsu:fi-7280:1201263
scanbd: Thread started for device fujitsu:fi-7280:1201263
scanbd: start dbus thread
scanbd: sane_poll
scanbd: Not Primary Owner (-1)
scanbd: Name Error (Connection ":1.1098" is not allowed to own the service "de.kmux.scanbd.server" due to security policies in the configuration file)
scanbd: udev init
scanbd: get udev monitor
scanbd: udev fd is non-blocking, now setting to blocking mode
scanbd: start udev thread
scanbd: udev thread started
scanbd: found 100 options for device fujitsu:fi-7280:1201263
scanbd: sane_find_matching_options
scanbd: found 5 actions in section (null)
scanbd: checking action scan with filter: ^scan.*
scanbd: found active option[2] source (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[3] mode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[4] resolution (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[8] tl-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[9] tl-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[10] br-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[11] br-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[13] brightness (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[14] contrast (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[16] threshold (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[17] rif (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[21] emphasis (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[35] variance (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[38] ald (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[41] df-action (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[46] df-recovery (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[47] paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[48] adv-paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[50] bgcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[51] dropoutcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[52] buffermode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[53] prepick (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[54] overscan (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[55] sleeptimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[56] offtimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[60] lowmemory (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[61] side (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[62] hwdeskewcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[63] swdeskew (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[64] swdespeck (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[65] swcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[66] swskip (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[79] top-edge (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[80] a3-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[81] b4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[82] a4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[83] b5-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[84] page-loaded (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[85] omr-df (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[86] cover-open (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[88] power-save (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[89] email (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[90] manual-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[91] scan (type: 0) for device fujitsu:fi-7280:1201263
scanbd: installing action scan (0) for fujitsu:fi-7280:1201263, option[91]: scan as: test.script
scanbd: multiple actions allowed
scanbd: get_sane_option_value
scanbd: Initial value of option scan is 0
scanbd: found active option[92] function (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[94] double-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[95] error-code (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[96] skew-angle (type: 1) for device fujitsu:fi-7280:1201263
scanbd: checking action email with filter: ^email$
scanbd: found active option[2] source (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[3] mode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[4] resolution (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[8] tl-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[9] tl-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[10] br-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[11] br-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[13] brightness (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[14] contrast (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[16] threshold (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[17] rif (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[21] emphasis (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[35] variance (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[38] ald (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[41] df-action (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[46] df-recovery (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[47] paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[48] adv-paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[50] bgcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[51] dropoutcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[52] buffermode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[53] prepick (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[54] overscan (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[55] sleeptimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[56] offtimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[60] lowmemory (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[61] side (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[62] hwdeskewcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[63] swdeskew (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[64] swdespeck (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[65] swcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[66] swskip (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[79] top-edge (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[80] a3-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[81] b4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[82] a4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[83] b5-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[84] page-loaded (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[85] omr-df (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[86] cover-open (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[88] power-save (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[89] email (type: 0) for device fujitsu:fi-7280:1201263
scanbd: installing action email (1) for fujitsu:fi-7280:1201263, option[89]: email as: test.script
scanbd: multiple actions allowed
scanbd: get_sane_option_value
scanbd: Initial value of option email is 0
scanbd: found active option[90] manual-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[91] scan (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[92] function (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[94] double-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[95] error-code (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[96] skew-angle (type: 1) for device fujitsu:fi-7280:1201263
scanbd: checking action copy with filter: ^copy$
scanbd: found active option[2] source (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[3] mode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[4] resolution (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[8] tl-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[9] tl-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[10] br-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[11] br-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[13] brightness (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[14] contrast (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[16] threshold (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[17] rif (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[21] emphasis (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[35] variance (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[38] ald (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[41] df-action (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[46] df-recovery (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[47] paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[48] adv-paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[50] bgcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[51] dropoutcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[52] buffermode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[53] prepick (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[54] overscan (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[55] sleeptimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[56] offtimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[60] lowmemory (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[61] side (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[62] hwdeskewcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[63] swdeskew (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[64] swdespeck (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[65] swcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[66] swskip (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[79] top-edge (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[80] a3-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[81] b4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[82] a4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[83] b5-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[84] page-loaded (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[85] omr-df (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[86] cover-open (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[88] power-save (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[89] email (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[90] manual-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[91] scan (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[92] function (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[94] double-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[95] error-code (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[96] skew-angle (type: 1) for device fujitsu:fi-7280:1201263
scanbd: checking action preview with filter: ^preview$
scanbd: found active option[2] source (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[3] mode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[4] resolution (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[8] tl-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[9] tl-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[10] br-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[11] br-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[13] brightness (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[14] contrast (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[16] threshold (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[17] rif (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[21] emphasis (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[35] variance (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[38] ald (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[41] df-action (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[46] df-recovery (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[47] paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[48] adv-paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[50] bgcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[51] dropoutcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[52] buffermode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[53] prepick (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[54] overscan (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[55] sleeptimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[56] offtimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[60] lowmemory (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[61] side (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[62] hwdeskewcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[63] swdeskew (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[64] swdespeck (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[65] swcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[66] swskip (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[79] top-edge (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[80] a3-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[81] b4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[82] a4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[83] b5-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[84] page-loaded (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[85] omr-df (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[86] cover-open (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[88] power-save (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[89] email (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[90] manual-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[91] scan (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[92] function (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[94] double-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[95] error-code (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[96] skew-angle (type: 1) for device fujitsu:fi-7280:1201263
scanbd: checking action globaltest with filter: ^message.*
scanbd: found active option[2] source (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[3] mode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[4] resolution (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[8] tl-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[9] tl-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[10] br-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[11] br-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[13] brightness (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[14] contrast (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[16] threshold (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[17] rif (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[21] emphasis (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[35] variance (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[38] ald (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[41] df-action (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[46] df-recovery (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[47] paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[48] adv-paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[50] bgcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[51] dropoutcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[52] buffermode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[53] prepick (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[54] overscan (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[55] sleeptimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[56] offtimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[60] lowmemory (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[61] side (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[62] hwdeskewcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[63] swdeskew (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[64] swdespeck (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[65] swcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[66] swskip (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[79] top-edge (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[80] a3-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[81] b4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[82] a4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[83] b5-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[84] page-loaded (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[85] omr-df (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[86] cover-open (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[88] power-save (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[89] email (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[90] manual-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[91] scan (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[92] function (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[94] double-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[95] error-code (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[96] skew-angle (type: 1) for device fujitsu:fi-7280:1201263
scanbd: sane_find_matching_functions
scanbd: found 2 functions in section (null)
scanbd: checking function function_knob with filter: ^message.*
scanbd: option[1] is not active
scanbd: found active option[2] source (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[3] mode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[4] resolution (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[5] is not active
scanbd: option[6] is not active
scanbd: option[7] is not active
scanbd: found active option[8] tl-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[9] tl-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[10] br-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[11] br-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: option[12] is not active
scanbd: found active option[13] brightness (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[14] contrast (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[15] is not active
scanbd: found active option[16] threshold (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[17] rif (type: 0) for device fujitsu:fi-7280:1201263
scanbd: option[18] is not active
scanbd: option[19] is not active
scanbd: option[20] is not active
scanbd: found active option[21] emphasis (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[22] is not active
scanbd: option[23] is not active
scanbd: option[24] is not active
scanbd: option[25] is not active
scanbd: option[26] is not active
scanbd: option[27] is not active
scanbd: option[28] is not active
scanbd: option[29] is not active
scanbd: option[30] is not active
scanbd: option[31] is not active
scanbd: option[32] is not active
scanbd: option[33] is not active
scanbd: option[34] is not active
scanbd: found active option[35] variance (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[36] is not active
scanbd: option[37] is not active
scanbd: found active option[38] ald (type: 0) for device fujitsu:fi-7280:1201263
scanbd: option[39] is not active
scanbd: option[40] is not active
scanbd: found active option[41] df-action (type: 3) for device fujitsu:fi-7280:1201263
scanbd: option[42] is not active
scanbd: option[43] is not active
scanbd: option[44] is not active
scanbd: option[45] is not active
scanbd: found active option[46] df-recovery (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[47] paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[48] adv-paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: option[49] is not active
scanbd: found active option[50] bgcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[51] dropoutcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[52] buffermode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[53] prepick (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[54] overscan (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[55] sleeptimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[56] offtimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[57] is not active
scanbd: option[58] is not active
scanbd: option[59] is not active
scanbd: found active option[60] lowmemory (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[61] side (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[62] hwdeskewcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[63] swdeskew (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[64] swdespeck (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[65] swcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[66] swskip (type: 2) for device fujitsu:fi-7280:1201263
scanbd: option[67] is not active
scanbd: option[68] is not active
scanbd: option[69] is not active
scanbd: option[70] is not active
scanbd: option[71] is not active
scanbd: option[72] is not active
scanbd: option[73] is not active
scanbd: option[74] is not active
scanbd: option[75] is not active
scanbd: option[76] is not active
scanbd: option[77] is not active
scanbd: option[78] is not active
scanbd: found active option[79] top-edge (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[80] a3-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[81] b4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[82] a4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[83] b5-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[84] page-loaded (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[85] omr-df (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[86] cover-open (type: 0) for device fujitsu:fi-7280:1201263
scanbd: option[87] is not active
scanbd: found active option[88] power-save (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[89] email (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[90] manual-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[91] scan (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[92] function (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[93] is not active
scanbd: found active option[94] double-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[95] error-code (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[96] skew-angle (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[97] is not active
scanbd: option[98] is not active
scanbd: option[99] is not active
scanbd: checking function function_mode with filter: ^mode.*
scanbd: option[1] is not active
scanbd: found active option[2] source (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[3] mode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: installing function function_mode for fujitsu:fi-7280:1201263, option[3]: mode as env: SCANBD_FUNCTION_MODE
scanbd: found active option[4] resolution (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[5] is not active
scanbd: option[6] is not active
scanbd: option[7] is not active
scanbd: found active option[8] tl-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[9] tl-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[10] br-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[11] br-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: option[12] is not active
scanbd: found active option[13] brightness (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[14] contrast (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[15] is not active
scanbd: found active option[16] threshold (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[17] rif (type: 0) for device fujitsu:fi-7280:1201263
scanbd: option[18] is not active
scanbd: option[19] is not active
scanbd: option[20] is not active
scanbd: found active option[21] emphasis (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[22] is not active
scanbd: option[23] is not active
scanbd: option[24] is not active
scanbd: option[25] is not active
scanbd: option[26] is not active
scanbd: option[27] is not active
scanbd: option[28] is not active
scanbd: option[29] is not active
scanbd: option[30] is not active
scanbd: option[31] is not active
scanbd: option[32] is not active
scanbd: option[33] is not active
scanbd: option[34] is not active
scanbd: found active option[35] variance (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[36] is not active
scanbd: option[37] is not active
scanbd: found active option[38] ald (type: 0) for device fujitsu:fi-7280:1201263
scanbd: option[39] is not active
scanbd: option[40] is not active
scanbd: found active option[41] df-action (type: 3) for device fujitsu:fi-7280:1201263
scanbd: option[42] is not active
scanbd: option[43] is not active
scanbd: option[44] is not active
scanbd: option[45] is not active
scanbd: found active option[46] df-recovery (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[47] paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[48] adv-paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: option[49] is not active
scanbd: found active option[50] bgcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[51] dropoutcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[52] buffermode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[53] prepick (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[54] overscan (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[55] sleeptimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[56] offtimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[57] is not active
scanbd: option[58] is not active
scanbd: option[59] is not active
scanbd: found active option[60] lowmemory (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[61] side (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[62] hwdeskewcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[63] swdeskew (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[64] swdespeck (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[65] swcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[66] swskip (type: 2) for device fujitsu:fi-7280:1201263
scanbd: option[67] is not active
scanbd: option[68] is not active
scanbd: option[69] is not active
scanbd: option[70] is not active
scanbd: option[71] is not active
scanbd: option[72] is not active
scanbd: option[73] is not active
scanbd: option[74] is not active
scanbd: option[75] is not active
scanbd: option[76] is not active
scanbd: option[77] is not active
scanbd: option[78] is not active
scanbd: found active option[79] top-edge (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[80] a3-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[81] b4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[82] a4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[83] b5-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[84] page-loaded (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[85] omr-df (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[86] cover-open (type: 0) for device fujitsu:fi-7280:1201263
scanbd: option[87] is not active
scanbd: found active option[88] power-save (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[89] email (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[90] manual-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[91] scan (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[92] function (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[93] is not active
scanbd: found active option[94] double-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[95] error-code (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[96] skew-angle (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[97] is not active
scanbd: option[98] is not active
scanbd: option[99] is not active
scanbd: found 7 local device sections
scanbd: checking device section avision with filter: ^avision.*
scanbd: checking device section fujitsu with filter: ^fujitsu.*
scanbd: found 4 local action for device fujitsu:fi-7280:1201263 [fujitsu]
scanbd: sane_find_matching_options
scanbd: found 4 actions in section fujitsu
scanbd: checking action paperload with filter: ^page-loaded.*
scanbd: found active option[2] source (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[3] mode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[4] resolution (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[8] tl-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[9] tl-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[10] br-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[11] br-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[13] brightness (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[14] contrast (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[16] threshold (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[17] rif (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[21] emphasis (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[35] variance (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[38] ald (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[41] df-action (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[46] df-recovery (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[47] paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[48] adv-paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[50] bgcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[51] dropoutcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[52] buffermode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[53] prepick (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[54] overscan (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[55] sleeptimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[56] offtimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[60] lowmemory (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[61] side (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[62] hwdeskewcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[63] swdeskew (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[64] swdespeck (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[65] swcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[66] swskip (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[79] top-edge (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[80] a3-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[81] b4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[82] a4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[83] b5-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[84] page-loaded (type: 0) for device fujitsu:fi-7280:1201263
scanbd: installing action paperload (2) for fujitsu:fi-7280:1201263, option[84]: page-loaded as: (null)
scanbd: multiple actions allowed
scanbd: get_sane_option_value
scanbd: Initial value of option page-loaded is 0
scanbd: found active option[85] omr-df (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[86] cover-open (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[88] power-save (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[89] email (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[90] manual-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[91] scan (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[92] function (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[94] double-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[95] error-code (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[96] skew-angle (type: 1) for device fujitsu:fi-7280:1201263
scanbd: checking action paperunload with filter: ^page-loaded.*
scanbd: found active option[2] source (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[3] mode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[4] resolution (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[8] tl-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[9] tl-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[10] br-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[11] br-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[13] brightness (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[14] contrast (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[16] threshold (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[17] rif (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[21] emphasis (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[35] variance (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[38] ald (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[41] df-action (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[46] df-recovery (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[47] paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[48] adv-paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[50] bgcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[51] dropoutcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[52] buffermode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[53] prepick (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[54] overscan (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[55] sleeptimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[56] offtimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[60] lowmemory (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[61] side (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[62] hwdeskewcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[63] swdeskew (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[64] swdespeck (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[65] swcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[66] swskip (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[79] top-edge (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[80] a3-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[81] b4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[82] a4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[83] b5-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[84] page-loaded (type: 0) for device fujitsu:fi-7280:1201263
scanbd: installing action paperunload (3) for fujitsu:fi-7280:1201263, option[84]: page-loaded as: (null)
scanbd: multiple actions allowed
scanbd: adding additional action paperunload (3) for option[84] with (null)
scanbd: get_sane_option_value
scanbd: Initial value of option page-loaded is 0
scanbd: found active option[85] omr-df (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[86] cover-open (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[88] power-save (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[89] email (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[90] manual-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[91] scan (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[92] function (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[94] double-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[95] error-code (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[96] skew-angle (type: 1) for device fujitsu:fi-7280:1201263
scanbd: checking action coveropen with filter: ^cover-open.*
scanbd: found active option[2] source (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[3] mode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[4] resolution (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[8] tl-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[9] tl-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[10] br-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[11] br-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[13] brightness (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[14] contrast (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[16] threshold (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[17] rif (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[21] emphasis (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[35] variance (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[38] ald (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[41] df-action (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[46] df-recovery (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[47] paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[48] adv-paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[50] bgcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[51] dropoutcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[52] buffermode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[53] prepick (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[54] overscan (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[55] sleeptimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[56] offtimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[60] lowmemory (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[61] side (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[62] hwdeskewcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[63] swdeskew (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[64] swdespeck (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[65] swcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[66] swskip (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[79] top-edge (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[80] a3-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[81] b4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[82] a4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[83] b5-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[84] page-loaded (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[85] omr-df (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[86] cover-open (type: 0) for device fujitsu:fi-7280:1201263
scanbd: installing action coveropen (4) for fujitsu:fi-7280:1201263, option[86]: cover-open as: (null)
scanbd: multiple actions allowed
scanbd: get_sane_option_value
scanbd: Initial value of option cover-open is 0
scanbd: found active option[88] power-save (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[89] email (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[90] manual-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[91] scan (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[92] function (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[94] double-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[95] error-code (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[96] skew-angle (type: 1) for device fujitsu:fi-7280:1201263
scanbd: checking action powersave with filter: ^power-save.*
scanbd: found active option[2] source (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[3] mode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[4] resolution (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[8] tl-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[9] tl-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[10] br-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[11] br-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[13] brightness (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[14] contrast (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[16] threshold (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[17] rif (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[21] emphasis (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[35] variance (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[38] ald (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[41] df-action (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[46] df-recovery (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[47] paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[48] adv-paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[50] bgcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[51] dropoutcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[52] buffermode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[53] prepick (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[54] overscan (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[55] sleeptimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[56] offtimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[60] lowmemory (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[61] side (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[62] hwdeskewcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[63] swdeskew (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[64] swdespeck (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[65] swcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[66] swskip (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[79] top-edge (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[80] a3-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[81] b4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[82] a4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[83] b5-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[84] page-loaded (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[85] omr-df (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[86] cover-open (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[88] power-save (type: 0) for device fujitsu:fi-7280:1201263
scanbd: installing action powersave (5) for fujitsu:fi-7280:1201263, option[88]: power-save as: (null)
scanbd: multiple actions allowed
scanbd: get_sane_option_value
scanbd: Initial value of option power-save is 0
scanbd: found active option[89] email (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[90] manual-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[91] scan (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[92] function (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[94] double-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[95] error-code (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[96] skew-angle (type: 1) for device fujitsu:fi-7280:1201263
scanbd: sane_find_matching_functions
scanbd: found 1 functions in section fujitsu
scanbd: checking function function_knob with filter: ^function.*
scanbd: option[1] is not active
scanbd: found active option[2] source (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[3] mode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[4] resolution (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[5] is not active
scanbd: option[6] is not active
scanbd: option[7] is not active
scanbd: found active option[8] tl-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[9] tl-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[10] br-x (type: 2) for device fujitsu:fi-7280:1201263
scanbd: found active option[11] br-y (type: 2) for device fujitsu:fi-7280:1201263
scanbd: option[12] is not active
scanbd: found active option[13] brightness (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[14] contrast (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[15] is not active
scanbd: found active option[16] threshold (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[17] rif (type: 0) for device fujitsu:fi-7280:1201263
scanbd: option[18] is not active
scanbd: option[19] is not active
scanbd: option[20] is not active
scanbd: found active option[21] emphasis (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[22] is not active
scanbd: option[23] is not active
scanbd: option[24] is not active
scanbd: option[25] is not active
scanbd: option[26] is not active
scanbd: option[27] is not active
scanbd: option[28] is not active
scanbd: option[29] is not active
scanbd: option[30] is not active
scanbd: option[31] is not active
scanbd: option[32] is not active
scanbd: option[33] is not active
scanbd: option[34] is not active
scanbd: found active option[35] variance (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[36] is not active
scanbd: option[37] is not active
scanbd: found active option[38] ald (type: 0) for device fujitsu:fi-7280:1201263
scanbd: option[39] is not active
scanbd: option[40] is not active
scanbd: found active option[41] df-action (type: 3) for device fujitsu:fi-7280:1201263
scanbd: option[42] is not active
scanbd: option[43] is not active
scanbd: option[44] is not active
scanbd: option[45] is not active
scanbd: found active option[46] df-recovery (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[47] paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[48] adv-paper-protect (type: 3) for device fujitsu:fi-7280:1201263
scanbd: option[49] is not active
scanbd: found active option[50] bgcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[51] dropoutcolor (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[52] buffermode (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[53] prepick (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[54] overscan (type: 3) for device fujitsu:fi-7280:1201263
scanbd: found active option[55] sleeptimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[56] offtimer (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[57] is not active
scanbd: option[58] is not active
scanbd: option[59] is not active
scanbd: found active option[60] lowmemory (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[61] side (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[62] hwdeskewcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[63] swdeskew (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[64] swdespeck (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[65] swcrop (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[66] swskip (type: 2) for device fujitsu:fi-7280:1201263
scanbd: option[67] is not active
scanbd: option[68] is not active
scanbd: option[69] is not active
scanbd: option[70] is not active
scanbd: option[71] is not active
scanbd: option[72] is not active
scanbd: option[73] is not active
scanbd: option[74] is not active
scanbd: option[75] is not active
scanbd: option[76] is not active
scanbd: option[77] is not active
scanbd: option[78] is not active
scanbd: found active option[79] top-edge (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[80] a3-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[81] b4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[82] a4-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[83] b5-paper (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[84] page-loaded (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[85] omr-df (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[86] cover-open (type: 0) for device fujitsu:fi-7280:1201263
scanbd: option[87] is not active
scanbd: found active option[88] power-save (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[89] email (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[90] manual-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[91] scan (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[92] function (type: 1) for device fujitsu:fi-7280:1201263
scanbd: installing function function_knob for fujitsu:fi-7280:1201263, option[92]: function as env: SCANBD_FUNCTION
scanbd: option[93] is not active
scanbd: found active option[94] double-feed (type: 0) for device fujitsu:fi-7280:1201263
scanbd: found active option[95] error-code (type: 1) for device fujitsu:fi-7280:1201263
scanbd: found active option[96] skew-angle (type: 1) for device fujitsu:fi-7280:1201263
scanbd: option[97] is not active
scanbd: option[98] is not active
scanbd: option[99] is not active
scanbd: checking device section hp with filter: ^hpaio.*
scanbd: checking device section pixma with filter: ^pixma.*
scanbd: checking device section snapscan with filter: (.*snapscan.*|.*Perfection.*)
scanbd: checking device section canon with filter: ^genesys.*
scanbd: checking device section plustek with filter: plustek
scanbd: timeout: 500 ms
scanbd: Start the polling for device fujitsu:fi-7280:1201263
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 1
scanbd: value trigger: numerical
scanbd: trigger action for email for device fujitsu:fi-7280:1201263 with script test.script
scanbd: get_sane_option_value
scanbd: Value of mode as string (len 7, hash -621353420): Lineart
scanbd: setting env: SCANBD_FUNCTION_MODE=Lineart
scanbd: get_sane_option_value
scanbd: setting env: SCANBD_FUNCTION=2
scanbd: setting env: PATH=/usr/sbin:/usr/bin:/sbin:/bin
scanbd: No PWD, setting env: PWD=/mnt/netshare/Service_Unterlagen/EDV_Hardware/Fujitsu/fi-7260
scanbd: setting env: USER=root
scanbd: setting env: HOME=/root
scanbd: setting env: SCANBD_DEVICE=fujitsu:fi-7280:1201263
scanbd: setting env: SCANBD_ACTION=email
scanbd: append string fujitsu:fi-7280:1201263 to signal scan_begin
scanbd: now sending signal scan_begin
scanbd: append string SCANBD_FUNCTION_MODE=Lineart to signal trigger
scanbd: append string SCANBD_FUNCTION=2 to signal trigger
scanbd: append string PATH=/usr/sbin:/usr/bin:/sbin:/bin to signal trigger
scanbd: append string PWD=/mnt/netshare/Service_Unterlagen/EDV_Hardware/Fujitsu/fi-7260 to signal trigger
scanbd: append string USER=root to signal trigger
scanbd: append string HOME=/root to signal trigger
scanbd: append string SCANBD_DEVICE=fujitsu:fi-7280:1201263 to signal trigger
scanbd: append string SCANBD_ACTION=email to signal trigger
scanbd: now sending signal trigger
scanbd: now flushing the dbus
scanbd: unref the signal
scanbd: using relative script path: test.script, expanded to: /etc/scanbd/test.script
scanbd: waiting for child: /etc/scanbd/test.script
scanbd: child /etc/scanbd/test.script exited with status: 0
scanbd: append string fujitsu:fi-7280:1201263 to signal scan_end
scanbd: now sending signal scan_end
scanbd: reopen device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: polling thread for fujitsu:fi-7280:1201263, before cancellation point
scanbd: polling thread for fujitsu:fi-7280:1201263, after cancellation point
scanbd: polling device fujitsu:fi-7280:1201263
scanbd: get_sane_option_value
scanbd: checking option scan number 91 (0) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option email number 89 (1) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option page-loaded number 84 (2) for device fujitsu:fi-7280:1201263: value: 0
scanbd: got the value already -> copy
scanbd: copy the value of option 84
scanbd: checking option page-loaded number 84 (3) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option cover-open number 86 (4) for device fujitsu:fi-7280:1201263: value: 0
scanbd: get_sane_option_value
scanbd: checking option power-save number 88 (5) for device fujitsu:fi-7280:1201263: value: 0
scanbd: sig_term/int_handler called with signal 2
scanbd: stop_sane_threads
scanbd: stopping poll thread for device fujitsu:fi-7280:1201263
scanbd: waiting for poll thread for device fujitsu:fi-7280:1201263
scanbd: sane_thread_cleanup_mutex
scanbd: closing device fujitsu:fi-7280:1201263
scanbd: freeing opt resources for device fujitsu:fi-7280:1201263 thread
scanbd: freeing function resources for device fujitsu:fi-7280:1201263 thread
scanbd: stop dbus thread
scanbd: stop udev thread
scanbd: join udev thread
scanbd: cleanup device handler
scanbd: close udev monitor
scanbd: close udev
scanbd: exiting scanbd