[Nut-upsdev] Add support for Ablerex Dk+ #979

[Manuel Wolfshant]

On 3/10/21 12:24 PM, Johnson-shen wrote:
> Dear Wolfy,
>
> Please refer to the below table for the whole support list of the UPS 
> Model of the new driver.
>
>
>
> Please kindly advise me if you have any questions.
>
> Regards!
> Johnson
>
Well, I am curious, what does the new driver add ? Currently I am using 
blazer_ser ( the UPS is connected to a RPI via a USB-RS232 adapter ). I 
assume based on the table above that the driver targets only UPS models 
newer than mine ?

Here is the full output from my UPS:

[wolfy at wolfy ~]$ upsc ablerex at pi
battery.charge: 100
battery.voltage: 108.48
battery.voltage.high: 104.00
battery.voltage.low: 83.20
battery.voltage.nominal: 96.0
device.mfr: Ablerex
device.model: MS3000RT
device.type: ups
driver.name: blazer_ser
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/ttyUSB0
driver.parameter.synchronous: no
driver.version: 2.7.4
driver.version.internal: 1.57
input.current.nominal: 14.0
input.frequency: 50.0
input.frequency.nominal: 50
input.voltage: 230.6
input.voltage.fault: 190.0
input.voltage.nominal: 220
output.voltage: 220.0
ups.beeper.status: disabled
ups.delay.shutdown: 30
ups.delay.start: 180
ups.firmware: MS02035C
ups.load: 43
ups.mfr: Ablerex
ups.model: MS3000RT
ups.status: OL
ups.temperature: 42.7
ups.type: online

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/nut-upsdev/attachments/20210310/5c2e1ed7/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: eblnieiaoeghfihm.png
Type: image/png
Size: 8803 bytes
Desc: not available
URL: <http://alioth-lists.debian.net/pipermail/nut-upsdev/attachments/20210310/5c2e1ed7/attachment.png>