[Nut-upsuser] powerware 5110 on ubuntu (feisty)
fengyuan at gmail.com
Wed Jan 2 03:59:50 UTC 2008
On Jan 2, 2008 3:51 AM, Charles Lepple <clepple at gmail.com> wrote:
> On Jan 1, 2008, at 9:58 AM, Feng Yuan wrote:
> > Hi,
> > I'm having trouble with nut running on feisty.
> > I have a powerware 5110 connected using USB
> > i did an "sudo lsusb -a" before and after i plugged in the powerware
> > usb cable and did a diff on the results of the two which was:
> Hmm, I get an error on feisty when I try to pass "-a" to lsusb.
sorry i meant "sudo lsusb -v"
> > --
> > 322c322
> > < Port 2: 0000.0100 power
> > ---
> >> Port 2: 0001.0301 C_CONNECT lowspeed power connect
> > --
> You should see more than just this change. That means a device is
> connected electrically to the port, but you should see an entry
> describing the device.
> (Also, this is just personal preference, but please use "diff -u" to
> show more of what is going on.)
"diff -u pre post" shows
--- pre.txt 2008-01-02 01:26:53.000000000 +1100
+++ post.txt 2008-01-02 01:27:21.000000000 +1100
@@ -319,7 +319,7 @@
Hub Port Status:
Port 1: 0000.0303 lowspeed power enable connect
- Port 2: 0000.0100 power
+ Port 2: 0001.0301 C_CONNECT lowspeed power connect
Device Status: 0x0003
Remote Wakeup Enabled
> What does dmesg say about this device?
there is no additional messages in dmesg following insertion/removal
of usb cable.
> Charles Lepple
> clepple at gmail
More information about the Nut-upsuser