[Nut-upsuser] Belkin 800VA Universal AVR doesn't warn about battery

[Gasper Kozak]

Hi,

I appreciate the help. I'm going on vacation soon, so I won't be dealing
with this for a while. When I come back, I'll get back on it and post the
results.

Thanks and best regards,
Gasper


On Mon, Jul 13, 2009 at 2:28 PM, Arjen de Korte
<nut+users at de-korte.org<nut%2Busers at de-korte.org>
> wrote:

> Citeren Gasper Kozak <gasper.kozak at gmail.com>:
>
>  Here it is, 30 seconds of output:
>> http://pastebin.com/f2c5aa338
>>
>
> This is looking good. The HID path (UPS.BELKINStatus.BELKINBatteryStatus)
> that we're using is available. Bit 2 of the value reported (when converted
> to an int) will be set if the battery is low and bit 6 will be set if the
> battery is empty. You may want to run the driver in debug mode and log the
> lines with the above path to see what is going on. Make sure to run the UPS
> with some load until it switches off by itself (so don't use it to power any
> systems at that time).
>
>
> Best regards, Arjen
> --
> Please keep list traffic on the list
>
>
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20090715/e47f82e4/attachment.htm>