[Nut-upsuser] ULTRA 2000 ULT33046 configuration

[Arjen de Korte]

Citeren JW Simpson <john op swajime.com>:

>         # # lsusb -vd 0d9f:0002|sed -ne '/^\w/p;/\bi/p'
>         # Bus 002 Device 002: ID 0d9f:0002 Powercom Co., Ltd
>         # Device Descriptor:
>         #   idVendor           0x0d9f Powercom Co., Ltd
>         #   idProduct          0x0002
>         #   iManufacturer           1 POWERCOM CO., LTD.
>         #   iProduct                2 USB to Serial
>         #   iSerial                 0
>         #     iConfiguration          4 Sample HID
>         #       iInterface              0
>         # Device Status:     0x0000
>
>         # compatibility:
>         http://www.networkupstools.org/compat/stable.html

This device should be supported by the 'powercom' driver (see 'man 8  
powercom' for options that may need to be provided in 'ups.conf'),  
provided cypress_m8 in your kernel is recent enough to recognize the  
build in USB to serial converter. If it is, you should point the  
'port' to the /dev/ttyUSBx port that is created when the device is  
plugged in.

Best regards, Arjen
-- 
Please keep list traffic on the list