[Nut-upsuser] Trust UPS Oxxtron 1300VA (17679)

Arnaud Quette aquette.dev at gmail.com
Tue Apr 24 15:25:45 UTC 2012

2012/4/24 Espen Berg <espen at halden.by>

>  Hi,
> the shutdown was not working as planned when I was testing it earlier.
> Nut are shutting down the server as expected when low battery are signaled,
> but it fails to shutdown the ups afterwards.

so currently, only 1/2 of the basic shutdown feature is working.

> Don't know if this is an configuration issue or driver issue, will have to
> do another test.

theoretically, UPS shutdown (and restart when power is back) is supported.
but the UPS implementation is a bit strange, as mentioned in the driver
moreover, this requires the UPS to be "on battery".

so my question is: when you did your test, were you running on battery?
how did you do the test? Ie, calling "upsmon -c fsd" or pulling off the
power plug and waiting for the low battery status?

if you again do the test, it would be good to not feed your PC with the UPS
(for testing) and have the driver running in debug mode (-DDDDD) to send
back the (compressed) output for investigation.

Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer - http://www.debian.org
Free Software Developer - http://arnaud.quette.free.fr/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20120424/6fdba256/attachment.html>

More information about the Nut-upsuser mailing list