[Nut-upsuser] Perhaps a Complicated Question

[FredericBohe at Eaton.com]

Do you have a ws2tcpip.h file in your mingw/include directory ?
What is exaclty the error reported ?
Do you see other warnings before this error ?
Can you send your config.log file (zipped) please.

Fred

--
Eaton Opensource Team - http://opensource.eaton.com



-----------------------------

-----------------------------

________________________________________
From: Lee Thompson [thompsonl at logh.net]
Sent: Tuesday, August 28, 2012 1:55 AM
To: Bohe, Frederic
Cc: nut-upsuser at lists.alioth.debian.org
Subject: Re: [Nut-upsuser] Perhaps a Complicated Question

That's great but I haven't really built anything in unix environments so
I'm going to need a lot of hand-holding or a really good wiki.

I did install MinGW/MSYS but I don't get very far.   It can't find
socklen_t.  Looking at the configure file, it's because it's not looking
in ws2tcpip.h but I have no idea how to change this.


On 8/26/2012 11:55 PM, FredericBohe at Eaton.com wrote:
> Hello,
>
> Indeed I have not compiled CGI for Windows as it was considered a bit outdated. But your request may change our mind, I will have to discuss this with Arnaud (NUT project leader), but he is on holiday currently.
>
> Anyway, there is not specific instructions for building NUT on Windows. You just need a working MingGW/MSYS environnement, then execute "./autogen.sh", "./configure", "make" and maybe "make install" just like for other Unix.
> The hard part for Windows build is getting the dependencies you need which sometimes requires to build them which might requires to get other dependencies and so on.
>
> Regards,
> Fred
>
> --
> Eaton Opensource Team - http://opensource.eaton.com
>
>
>
> -----------------------------
>
> -----------------------------
>
> ________________________________________
> From: nut-upsuser-bounces+fredericbohe=eaton.com at lists.alioth.debian.org [nut-upsuser-bounces+fredericbohe=eaton.com at lists.alioth.debian.org] on behalf of Lee Thompson [thompsonl at logh.net]
> Sent: Friday, August 24, 2012 9:41 PM
> To: nut-upsuser at lists.alioth.debian.org
> Subject: [Nut-upsuser] Perhaps a Complicated Question
>
> My network at home/home office is primarily a Windows environment.
> However, I have 3 ReadyNAS Ultra machines which use NUT for UPS
> monitoring.
>
> The ReadyNAS devices are running a slightly modified Debian
> (2.6.37.6.RNx86_64.2.4) with NUT 2.0.5.
>
> What I would like to do is add some sort of web-based UPS monitoring on
> my intranet web server (IIS 7.5 on 2008 R2), however nut-cgi appears to
> be missing from the Windows distribution.
>
> It appears that I need to compile my own copy of NUT on windows with
> nut-cgi enabled but I am unsure how to do this as there don't appear to
> be any Windows build instructions.
>
>
>
> --
> Lee Thompson
> thompsonl at logh.net
>


--
Lee Thompson
thompsonl at logh.net