[Nut-upsuser] NUT 2.6.3-1 Windows package

[Dmitry Ogorodnikov]

Hello,

> How do you restart NUT ? I guess you click on "Stop service" then "Start
> service" right ?

"My computer" > "Manage" > "Services" > Right-click on NUT > "Restart"

> When you are facing this issue, can you try to manually run upsmon in a
> console (cmd.exe):
>
> cd C:\NUT\sbin
> upsmon -DDDDD

So, I stat NUT service, pull out power cord on ~10 seconds, push it
back and stop NUT service. After that:

C:\Program Files (x86)\NUT\sbin>upsmon -DDDDD
Network UPS Tools upsmon 2.6.3-3534:3545M
Fatal error: A previous upsmon instance is already running!
Either stop the previous instance first, or use the 'reload' command.

Process "upsmon" actually isn't running.
I cannot imagine how it happens.  When this situation occurs, removing
upsmon.pid helps, BUT without disconnecting power cord NUT
starts/restarts fine even with existing upsmon.pid.

Here is my current upsmon.conf:

MONITOR test at 10.35.0.180 1 upsmonuser mypassword slave
MINSUPPLIES 1
SHUTDOWNCMD "cscript \"C:\\Program Files (x86)\\NUT\\bin\\chronos\\main.vbs\""
NOTIFYCMD "cscript \"C:\\Program Files (x86)\\NUT\\bin\\chronos\\main.vbs\""
NOTIFYMSG ONLINE	"ONLINE"
NOTIFYMSG ONBATT	"ONBATT"
NOTIFYFLAG ONLINE	SYSLOG+WALL+EXEC
NOTIFYFLAG ONBATT	SYSLOG+WALL+EXEC
POLLFREQ 5
POLLFREQALERT 5
HOSTSYNC 15
DEADTIME 15
RBWARNTIME 43200
NOCOMMWARNTIME 300
FINALDELAY 5

main.vbs is a stub script that just writes a log. It gets the notifies
and works as expected.
As you can see, in this case I don't use upssched.

Can I get a "-DDDDD" output from upsmon when it runs as NUT service?

Thank you.

Regards,
Dmitry