[Nut-upsuser] [HCL] Eaton 5S1500LCD supported by usbhid-ups

[Matt Ivie]

Device Manufacturer: Eaton
Device Name: 5S1500LCD
----------------------------------------------------------
upsc output:

battery.charge: 100
battery.charge.low: 20
battery.runtime: 3515
battery.type: PbAc
device.mfr: EATON
device.model: Ellipse PRO 1500 
device.serial: 0000000000
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.vendorid: 0463
driver.version: 2.6.4
driver.version.data: MGE HID 1.31
driver.version.internal: 0.37
input.frequency: 60.0
input.transfer.high: 138
input.transfer.low: 93
input.voltage: 121.0
input.voltage.extended: no
outlet.1.desc: PowerShare Outlet 1
outlet.1.id: 2
outlet.1.status: on
outlet.1.switchable: no
outlet.2.desc: PowerShare Outlet 2
outlet.2.id: 3
outlet.2.status: on
outlet.2.switchable: no
outlet.desc: Main Outlet
outlet.id: 1
outlet.switchable: no
output.frequency: 60.0
output.frequency.nominal: 60
output.voltage: 121.0
output.voltage.nominal: 115
ups.beeper.status: enabled
ups.delay.shutdown: 20
ups.delay.start: 30
ups.firmware: 01.04.0012
ups.load: 3
ups.mfr: EATON
ups.model: Ellipse PRO 1500 
ups.power: 55
ups.power.nominal: 1500
ups.productid: ffff
ups.realpower: 31
ups.serial: 0000000000
ups.status: OL CHRG
ups.timer.shutdown: 0
ups.timer.start: 0
ups.vendorid: 0463

-------------------------------------------------------
Tested shutdown sequence and the computer powers down, then the UPS
shuts down. UPS powers back on and all devices that are supposed to turn
on do. Everything appears to be working as expected.
-------------------------------------------------------
Link to description: http://powerquality.eaton.com/5S1500LCD.aspx?CX=3