[sane-devel] sane-find-scanner finds multiple scanners

[Carsten Neumann]

Hi, Johan,

you've missed to tell what your problems actually are!
I don't see any problem why you can't use your scanner.
But you haven't told that you cannot use it.
What are the errors you get, if there are any?

	Carsten


On Mon, 06 May 2002, Johan Wehtje wrote:
> have read the docs as well as the SCSI 2.4 how to but am still none the 
> wiser as to why I get the following output from sane-find-scanner
> ===========================================
> sane-find-scanner: found SCSI scanner " Scanner 1.40" at device /dev/scanner
> sane-find-scanner: found SCSI scanner " Scanner 1.40" at device /dev/sg1
> sane-find-scanner: found SCSI scanner " Scanner 1.40" at device /dev/sg2
> sane-find-scanner: found SCSI scanner " Scanner 1.40" at device /dev/sg3
> sane-find-scanner: found SCSI scanner " Scanner 1.40" at device /dev/sg4
> sane-find-scanner: found SCSI scanner " Scanner 1.40" at device /dev/sg5
> sane-find-scanner: found SCSI scanner " Scanner 1.40" at device /dev/sg6
> sane-find-scanner: found SCSI scanner " Scanner 1.40" at device /dev/sg7
> sane-find-scanner: found SCSI scanner " Scanner 1.40" at device /dev/sg8
> sane-find-scanner: found SCSI scanner " Scanner 1.40" at device /dev/sgb
> sane-find-scanner: found SCSI scanner " Scanner 1.40" at device /dev/sgc
> sane-find-scanner: found SCSI scanner " Scanner 1.40" at device /dev/sgd
> sane-find-scanner: found SCSI scanner " Scanner 1.40" at device /dev/sge
> sane-find-scanner: found SCSI scanner " Scanner 1.40" at device /dev/sgf
> sane-find-scanner: found SCSI scanner " Scanner 1.40" at device /dev/sgg
> sane-find-scanner: found SCSI scanner " Scanner 1.40" at device /dev/sgh
> sane-find-scanner: found SCSI scanner " Scanner 1.40" at device /dev/sgi
> ======================================================
> I only have one scanner , microtek e3 connected to a adpaptec 1524 scsi card 
> (shipped with scanner). The aha152x scsi driver is loaded as a module. The 
> kernel is 2.4.18. The correct irq and io are passed as params to the module. 
> The system is a PII 400 MHZ , Asus MBrd , 128 mb RAM, Pheonix BIOS. I have an 
> older Zip 100 disk (parralell) that is loaded as a module and sits at sda4. I 
> have my own script for loading the zip as I need to modprobe lp before I do, 
> then modprobe ppa.
> I get the same result even if I don't load the zip and lp modules but only 
> prob the aha152x module manually.
> I am probably missing something really simple here but I can't see what it is 
> so would appreciate some help as i have been fiddling with thsi for the past 
> few weeks trying to get it to work.
> BTW this is a dual boot system (win 98 SE) and the scanner works just fine in 
> Windows , but i would really like to skip booting into windows every time i 
> want to use the scanner.
> anf FYI the out of "cat /proc/scsi/scsi" is below:
> ==================================
> Attached devices: 
> Host: scsi0 Channel: 00 Id: 06 Lun: 00
>   Vendor: IOMEGA   Model: ZIP 100          Rev: D.17
>   Type:   Direct-Access                    ANSI SCSI revision: 02
> Host: scsi1 Channel: 00 Id: 01 Lun: 00
>   Vendor:          Model: Scanner          Rev: 1.40
>   Type:   Scanner                          ANSI SCSI revision: 04
> Host: scsi1 Channel: 00 Id: 01 Lun: 01
>   Vendor:          Model: Scanner          Rev: 1.40
>   Type:   Scanner                          ANSI SCSI revision: 04
> Host: scsi1 Channel: 00 Id: 01 Lun: 02
>   Vendor:          Model: Scanner          Rev: 1.40
>   Type:   Scanner                          ANSI SCSI revision: 04
> Host: scsi1 Channel: 00 Id: 01 Lun: 03
>   Vendor:          Model: Scanner          Rev: 1.40
>   Type:   Scanner                          ANSI SCSI revision: 04
> Host: scsi1 Channel: 00 Id: 01 Lun: 04
>   Vendor:          Model: Scanner          Rev: 1.40
>   Type:   Scanner                          ANSI SCSI revision: 04
> Host: scsi1 Channel: 00 Id: 01 Lun: 05
>   Vendor:          Model: Scanner          Rev: 1.40
>   Type:   Scanner                          ANSI SCSI revision: 04
> Host: scsi1 Channel: 00 Id: 01 Lun: 06
>   Vendor:          Model: Scanner          Rev: 1.40
>   Type:   Scanner                          ANSI SCSI revision: 04
> Host: scsi1 Channel: 00 Id: 01 Lun: 07
>   Vendor:          Model: Scanner          Rev: 1.40
>   Type:   Scanner                          ANSI SCSI revision: 04
> =========================================
> Cheers
> Johan Wehtje
> 
> _______________________________________________
> Sane-devel mailing list
> Sane-devel@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel