[sane-devel] HP 3200c

[Julien BLACHE]

"CARLOS EDUARDO DANTAS DE MENEZES" <carlos.edmenezes at sp.senac.br> wrote:

Hi,

> [umax_pp_low] Found 0xFF expected 0x00  (umax_pp_low.c:5002)

> [umax_pp_low] Found 0x11 expected 0x00  (umax_pp_low.c:5002)

> # dmesg | grep parport
> parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
> lp0: using parport0 (polling).
>
> Any sugestions?

Try changing the type of your parallel port in the BIOS to something
else than EPP (can't remember what the "normal" mode is... ECP
?). IIRC this is usually the cause of such messages.

JB.

-- 
Julien BLACHE                                   <http://www.jblache.org> 
<jb at jblache.org>