[sane-devel] Formulardaten

cgi-mailer at kundenserver.de cgi-mailer at kundenserver.de
Sat Apr 14 12:51:36 UTC 2007



===========================================
== Neuer Eintrag
===========================================

      
-------------------------------------------
-- Formular: 'adddev'
-------------------------------------------

1. Your email address:
   'roland.graf at alice.it'
2. Manufacturer (e.g. "Mustek"):
   'Hewlett-Packard'
3. Model name (e.g. ScanExpress 1200UB):
   'HP-Scanjet G4010'
4. Bus type:
   'USB'
5. Vendor id (e.g. 0x001):
   '0x03f0'
6. Product id (e.g. 0x0002):
   '4505'
7. Chipset (e.g. lm9831):
   'GL841'
8. Comments (e.g. similar to Mustek 1234):
   'I've seen on your web-page that you don't have data for this scanner. I want to help you in testing and if possible in programming too. If you need futher information don't hesitate to contact me. 
I will send you an iso image of the windows installation cd.

Best regards

Roland'
9. Data (e.g. sane-find-scanner -v -v):
   'This is sane-find-scanner from sane-backends 1.0.18

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

searching for SCSI scanners:
checking /dev/scanner... failed to open (Invalid argument)
checking /dev/sg0... failed to open (Invalid argument)
checking /dev/sg1... failed to open (Invalid argument)
checking /dev/sg2... failed to open (Invalid argument)
checking /dev/sg3... failed to open (Invalid argument)
checking /dev/sg4... failed to open (Invalid argument)
checking /dev/sg5... failed to open (Invalid argument)
checking /dev/sg6... failed to open (Invalid argument)
checking /dev/sg7... failed to open (Invalid argument)
checking /dev/sg8... failed to open (Invalid argument)
checking /dev/sg9... failed to open (Invalid argument)
checking /dev/sga... failed to open (Invalid argument)
checking /dev/sgb... failed to open (Invalid argument)
checking /dev/sgc... failed to open (Invalid argument)
checking /dev/sgd... failed to open (Invalid argument)
checking /dev/sge... failed to open (Invalid argument)
checking /dev/sgf... failed to open (Invalid argument)
checking /dev/sgg... failed to open (Invalid argument)
checking /dev/sgh... failed to open (Invalid argument)
checking /dev/sgi... failed to open (Invalid argument)
checking /dev/sgj... failed to open (Invalid argument)
checking /dev/sgk... failed to open (Invalid argument)
checking /dev/sgl... failed to open (Invalid argument)
checking /dev/sgm... failed to open (Invalid argument)
checking /dev/sgn... failed to open (Invalid argument)
checking /dev/sgo... failed to open (Invalid argument)
checking /dev/sgp... failed to open (Invalid argument)
checking /dev/sgq... failed to open (Invalid argument)
checking /dev/sgr... failed to open (Invalid argument)
checking /dev/sgs... failed to open (Invalid argument)
checking /dev/sgt... failed to open (Invalid argument)
checking /dev/sgu... failed to open (Invalid argument)
checking /dev/sgv... failed to open (Invalid argument)
checking /dev/sgw... failed to open (Invalid argument)
checking /dev/sgx... failed to open (Invalid argument)
checking /dev/sgy... failed to open (Invalid argument)
checking /dev/sgz... failed to open (Invalid argument)
  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

searching for USB scanners:
checking /dev/usb/scanner... failed to open (Invalid argument)
checking /dev/usb/scanner0... failed to open (Invalid argument)
checking /dev/usb/scanner1... failed to open (Invalid argument)
checking /dev/usb/scanner2... failed to open (Invalid argument)
checking /dev/usb/scanner3... failed to open (Invalid argument)
checking /dev/usb/scanner4... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner7... failed to open (Invalid argument)
checking /dev/usb/scanner8... failed to open (Invalid argument)
checking /dev/usb/scanner9... failed to open (Invalid argument)
checking /dev/usb/scanner10... failed to open (Invalid argument)
checking /dev/usb/scanner11... failed to open (Invalid argument)
checking /dev/usb/scanner12... failed to open (Invalid argument)
checking /dev/usb/scanner13... failed to open (Invalid argument)
checking /dev/usb/scanner14... failed to open (Invalid argument)
checking /dev/usb/scanner15... failed to open (Invalid argument)
checking /dev/usbscanner... failed to open (Invalid argument)
checking /dev/usbscanner0... failed to open (Invalid argument)
checking /dev/usbscanner1... failed to open (Invalid argument)
checking /dev/usbscanner2... failed to open (Invalid argument)
checking /dev/usbscanner3... failed to open (Invalid argument)
checking /dev/usbscanner4... failed to open (Invalid argument)
checking /dev/usbscanner5... failed to open (Invalid argument)
checking /dev/usbscanner6... failed to open (Invalid argument)
checking /dev/usbscanner7... failed to open (Invalid argument)
checking /dev/usbscanner8... failed to open (Invalid argument)
checking /dev/usbscanner9... failed to open (Invalid argument)
checking /dev/usbscanner10... failed to open (Invalid argument)
checking /dev/usbscanner11... failed to open (Invalid argument)
checking /dev/usbscanner12... failed to open (Invalid argument)
checking /dev/usbscanner13... failed to open (Invalid argument)
checking /dev/usbscanner14... failed to open (Invalid argument)
checking /dev/usbscanner15... failed to open (Invalid argument)
trying libusb:

<device descriptor of 0x0000/0x0000 at 006:001 (Linux 2.6.19-gentoo-r5 ohci_hcd OHCI Host Controller)>
bLength               18
bDescriptorType       1
bcdUSB                1.10
bDeviceClass          9
bDeviceSubClass       0
bDeviceProtocol       0
bMaxPacketSize0       64
idVendor              0x0000
idProduct             0x0000
bcdDevice             2.06
iManufacturer         3 (Linux 2.6.19-gentoo-r5 ohci_hcd)
iProduct              2 (OHCI Host Controller)
iSerialNumber         1 (0000:00:09.2)
bNumConfigurations    1
 <configuration 0>
 bLength              9
 bDescriptorType      2
 wTotalLength         25
 bNumInterfaces       1
 bConfigurationValue  1
 iConfiguration       0 ()
 bmAttributes         224 (Self-poweredRemote Wakeup)
 MaxPower             0 mA
  <interface 0>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   0
   bAlternateSetting  0
   bNumEndpoints      1
   bInterfaceClass    9
   bInterfaceSubClass 0
   bInterfaceProtocol 0
   iInterface         0 ()
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x81 (in 0x01)
    bmAttributes      3 (interrupt)
    wMaxPacketSize    2
    bInterval         255 ms
    bRefresh          0
    bSynchAddress     0

<device descriptor of 0x046d/0xc285 at 006:002 (Logitech Inc. WingMan Strike Force 3D)>
bLength               18
bDescriptorType       1
bcdUSB                1.00
bDeviceClass          0
bDeviceSubClass       0
bDeviceProtocol       0
bMaxPacketSize0       8
idVendor              0x046D
idProduct             0xC285
bcdDevice             1.00
iManufacturer         4 (Logitech Inc.)
iProduct              32 (WingMan Strike Force 3D)
iSerialNumber         0 ()
bNumConfigurations    1
 <configuration 0>
 bLength              9
 bDescriptorType      2
 wTotalLength         41
 bNumInterfaces       1
 bConfigurationValue  1
 iConfiguration       0 ()
 bmAttributes         128 ()
 MaxPower             80 mA
  <interface 0>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   0
   bAlternateSetting  0
   bNumEndpoints      2
   bInterfaceClass    3
   bInterfaceSubClass 0
   bInterfaceProtocol 0
   iInterface         0 ()
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x81 (in 0x01)
    bmAttributes      3 (interrupt)
    wMaxPacketSize    8
    bInterval         10 ms
    bRefresh          0
    bSynchAddress     0
    <endpoint 1>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x01 (out 0x01)
    bmAttributes      3 (interrupt)
    wMaxPacketSize    8
    bInterval         10 ms
    bRefresh          0
    bSynchAddress     0

<device descriptor of 0x0000/0x0000 at 005:001 (Linux 2.6.19-gentoo-r5 ohci_hcd OHCI Host Controller)>
bLength               18
bDescriptorType       1
bcdUSB                1.10
bDeviceClass          9
bDeviceSubClass       0
bDeviceProtocol       0
bMaxPacketSize0       64
idVendor              0x0000
idProduct             0x0000
bcdDevice             2.06
iManufacturer         3 (Linux 2.6.19-gentoo-r5 ohci_hcd)
iProduct              2 (OHCI Host Controller)
iSerialNumber         1 (0000:00:09.1)
bNumConfigurations    1
 <configuration 0>
 bLength              9
 bDescriptorType      2
 wTotalLength         25
 bNumInterfaces       1
 bConfigurationValue  1
 iConfiguration       0 ()
 bmAttributes         224 (Self-poweredRemote Wakeup)
 MaxPower             0 mA
  <interface 0>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   0
   bAlternateSetting  0
   bNumEndpoints      1
   bInterfaceClass    9
   bInterfaceSubClass 0
   bInterfaceProtocol 0
   iInterface         0 ()
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x81 (in 0x01)
    bmAttributes      3 (interrupt)
    wMaxPacketSize    2
    bInterval         255 ms
    bRefresh          0
    bSynchAddress     0

<device descriptor of 0x0000/0x0000 at 004:001 (Linux 2.6.19-gentoo-r5 ohci_hcd OHCI Host Controller)>
bLength               18
bDescriptorType       1
bcdUSB                1.10
bDeviceClass          9
bDeviceSubClass       0
bDeviceProtocol       0
bMaxPacketSize0       64
idVendor              0x0000
idProduct             0x0000
bcdDevice             2.06
iManufacturer         3 (Linux 2.6.19-gentoo-r5 ohci_hcd)
iProduct              2 (OHCI Host Controller)
iSerialNumber         1 (0000:00:09.0)
bNumConfigurations    1
 <configuration 0>
 bLength              9
 bDescriptorType      2
 wTotalLength         25
 bNumInterfaces       1
 bConfigurationValue  1
 iConfiguration       0 ()
 bmAttributes         224 (Self-poweredRemote Wakeup)
 MaxPower             0 mA
  <interface 0>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   0
   bAlternateSetting  0
   bNumEndpoints      1
   bInterfaceClass    9
   bInterfaceSubClass 0
   bInterfaceProtocol 0
   iInterface         0 ()
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x81 (in 0x01)
    bmAttributes      3 (interrupt)
    wMaxPacketSize    2
    bInterval         255 ms
    bRefresh          0
    bSynchAddress     0

<device descriptor of 0x0000/0x0000 at 003:001 (Linux 2.6.19-gentoo-r5 uhci_hcd UHCI Host Controller)>
bLength               18
bDescriptorType       1
bcdUSB                1.10
bDeviceClass          9
bDeviceSubClass       0
bDeviceProtocol       0
bMaxPacketSize0       64
idVendor              0x0000
idProduct             0x0000
bcdDevice             2.06
iManufacturer         3 (Linux 2.6.19-gentoo-r5 uhci_hcd)
iProduct              2 (UHCI Host Controller)
iSerialNumber         1 (0000:00:11.3)
bNumConfigurations    1
 <configuration 0>
 bLength              9
 bDescriptorType      2
 wTotalLength         25
 bNumInterfaces       1
 bConfigurationValue  1
 iConfiguration       0 ()
 bmAttributes         224 (Self-poweredRemote Wakeup)
 MaxPower             0 mA
  <interface 0>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   0
   bAlternateSetting  0
   bNumEndpoints      1
   bInterfaceClass    9
   bInterfaceSubClass 0
   bInterfaceProtocol 0
   iInterface         0 ()
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x81 (in 0x01)
    bmAttributes      3 (interrupt)
    wMaxPacketSize    2
    bInterval         255 ms
    bRefresh          0
    bSynchAddress     0

<device descriptor of 0x05e3/0x0760 at 002:003 (Flash Reader)>
bLength               18
bDescriptorType       1
bcdUSB                2.00
bDeviceClass          0
bDeviceSubClass       0
bDeviceProtocol       0
bMaxPacketSize0       64
idVendor              0x05E3
idProduct             0x0760
bcdDevice             1.28
iManufacturer         0 ()
iProduct              3 (Flash Reader)
iSerialNumber         4 (00826)
bNumConfigurations    1
 <configuration 0>
 bLength              9
 bDescriptorType      2
 wTotalLength         32
 bNumInterfaces       1
 bConfigurationValue  1
 iConfiguration       0 ()
 bmAttributes         128 ()
 MaxPower             500 mA
  <interface 0>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   0
   bAlternateSetting  0
   bNumEndpoints      2
   bInterfaceClass    8
   bInterfaceSubClass 6
   bInterfaceProtocol 80
   iInterface         0 ()
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x81 (in 0x01)
    bmAttributes      2 (bulk)
    wMaxPacketSize    64
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
    <endpoint 1>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x02 (out 0x02)
    bmAttributes      2 (bulk)
    wMaxPacketSize    64
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0

<device descriptor of 0x0451/0x2036 at 002:002>
bLength               18
bDescriptorType       1
bcdUSB                1.10
bDeviceClass          9
bDeviceSubClass       0
bDeviceProtocol       0
bMaxPacketSize0       8
idVendor              0x0451
idProduct             0x2036
bcdDevice             1.01
iManufacturer         0 ()
iProduct              1 ((null))
iSerialNumber         0 ()
bNumConfigurations    1
 <configuration 0>
 bLength              9
 bDescriptorType      2
 wTotalLength         25
 bNumInterfaces       1
 bConfigurationValue  1
 iConfiguration       1 ((null))
 bmAttributes         160 (Remote Wakeup)
 MaxPower             100 mA
  <interface 0>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   0
   bAlternateSetting  0
   bNumEndpoints      1
   bInterfaceClass    9
   bInterfaceSubClass 0
   bInterfaceProtocol 0
   iInterface         1 ((null))
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x81 (in 0x01)
    bmAttributes      3 (interrupt)
    wMaxPacketSize    1
    bInterval         255 ms
    bRefresh          0
    bSynchAddress     0

<device descriptor of 0x0000/0x0000 at 002:001 (Linux 2.6.19-gentoo-r5 uhci_hcd UHCI Host Controller)>
bLength               18
bDescriptorType       1
bcdUSB                1.10
bDeviceClass          9
bDeviceSubClass       0
bDeviceProtocol       0
bMaxPacketSize0       64
idVendor              0x0000
idProduct             0x0000
bcdDevice             2.06
iManufacturer         3 (Linux 2.6.19-gentoo-r5 uhci_hcd)
iProduct              2 (UHCI Host Controller)
iSerialNumber         1 (0000:00:11.2)
bNumConfigurations    1
 <configuration 0>
 bLength              9
 bDescriptorType      2
 wTotalLength         25
 bNumInterfaces       1
 bConfigurationValue  1
 iConfiguration       0 ()
 bmAttributes         224 (Self-poweredRemote Wakeup)
 MaxPower             0 mA
  <interface 0>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   0
   bAlternateSetting  0
   bNumEndpoints      1
   bInterfaceClass    9
   bInterfaceSubClass 0
   bInterfaceProtocol 0
   iInterface         0 ()
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x81 (in 0x01)
    bmAttributes      3 (interrupt)
    wMaxPacketSize    2
    bInterval         255 ms
    bRefresh          0
    bSynchAddress     0

<device descriptor of 0x046d/0xc704 at 002:004 (Logitech USB Receiver)>
bLength               18
bDescriptorType       1
bcdUSB                1.10
bDeviceClass          0
bDeviceSubClass       0
bDeviceProtocol       0
bMaxPacketSize0       8
idVendor              0x046D
idProduct             0xC704
bcdDevice             36.20
iManufacturer         1 (Logitech)
iProduct              2 (USB Receiver)
iSerialNumber         3 (1F07F0)
bNumConfigurations    1
 <configuration 0>
 bLength              9
 bDescriptorType      2
 wTotalLength         59
 bNumInterfaces       2
 bConfigurationValue  1
 iConfiguration       0 ()
 bmAttributes         160 (Remote Wakeup)
 MaxPower             98 mA
  <interface 0>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   0
   bAlternateSetting  0
   bNumEndpoints      1
   bInterfaceClass    3
   bInterfaceSubClass 1
   bInterfaceProtocol 1
   iInterface         0 ()
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x81 (in 0x01)
    bmAttributes      3 (interrupt)
    wMaxPacketSize    8
    bInterval         10 ms
    bRefresh          0
    bSynchAddress     0
  <interface 1>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   1
   bAlternateSetting  0
   bNumEndpoints      1
   bInterfaceClass    3
   bInterfaceSubClass 1
   bInterfaceProtocol 2
   iInterface         0 ()
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x82 (in 0x02)
    bmAttributes      3 (interrupt)
    wMaxPacketSize    8
    bInterval         10 ms
    bRefresh          0
    bSynchAddress     0

<device descriptor of 0x03f0/0x4505 at 001:005 (Hewlett-Packard HP Scanjet G4000 Photo series)>
bLength               18
bDescriptorType       1
bcdUSB                2.00
bDeviceClass          255
bDeviceSubClass       255
bDeviceProtocol       255
bMaxPacketSize0       64
idVendor              0x03F0
idProduct             0x4505
bcdDevice             5.00
iManufacturer         1 (Hewlett-Packard)
iProduct              3 (HP Scanjet G4000 Photo series)
iSerialNumber         12 (CN6BDA605F04)
bNumConfigurations    1
 <configuration 0>
 bLength              9
 bDescriptorType      2
 wTotalLength         39
 bNumInterfaces       1
 bConfigurationValue  1
 iConfiguration       0 ()
 bmAttributes         192 (Self-powered)
 MaxPower             10 mA
  <interface 0>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   0
   bAlternateSetting  0
   bNumEndpoints      3
   bInterfaceClass    255
   bInterfaceSubClass 255
   bInterfaceProtocol 255
   iInterface         0 ()
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x81 (in 0x01)
    bmAttributes      2 (bulk)
    wMaxPacketSize    512
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
    <endpoint 1>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x02 (out 0x02)
    bmAttributes      2 (bulk)
    wMaxPacketSize    512
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
    <endpoint 2>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x83 (in 0x03)
    bmAttributes      3 (interrupt)
    wMaxPacketSize    1
    bInterval         8 ms
    bRefresh          0
    bSynchAddress     0

<trying to find out which USB chip is used>
    checking for GT-6801 ...
    this is not a GT-6801 (bcdUSB = 0x200)
    checking for GT-6816 ...
    this is not a GT-6816 (bDeviceClass = 255, bInterfaceClass = 255)
    checking for GT-8911 ...
    this is not a GT-8911 (check 1, bDeviceClass = 255, bInterfaceClass = 255)
    checking for MA-1017 ...
    this is not a MA-1017 (bDeviceClass = 255, bInterfaceClass = 255)
    checking for MA-1015 ...
    this is not a MA-1015 (bcdUSB = 0x200)
    checking for MA-1509 ...
    this is not a MA-1509 (bcdUSB = 0x200)
    checking for LM983[1,2,3] ...
    this is not a LM983x (bcdUSB = 0x200)
    checking for GL646 ...
    this is not a GL646 (bDeviceClass = 255, bInterfaceClass = 255)
    checking for GL646_HP ...
    this is not a GL646_HP (bcdUSB = 0x200)
    checking for GL660+GL646 ...
    this is not a GL660+GL646 (bDeviceClass = 255, bInterfaceClass = 255)
    checking for GL841 ...
<This USB chip looks like a GL841 (result from sane-backends 1.0.18)>

found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x4505 [HP Scanjet G4000 Photo series], chip=GL841) at libusb:001:005

<device descriptor of 0x0000/0x0000 at 001:001 (Linux 2.6.19-gentoo-r5 ehci_hcd EHCI Host Controller)>
bLength               18
bDescriptorType       1
bcdUSB                2.00
bDeviceClass          9
bDeviceSubClass       0
bDeviceProtocol       1
bMaxPacketSize0       64
idVendor              0x0000
idProduct             0x0000
bcdDevice             2.06
iManufacturer         3 (Linux 2.6.19-gentoo-r5 ehci_hcd)
iProduct              2 (EHCI Host Controller)
iSerialNumber         1 (0000:00:09.3)
bNumConfigurations    1
 <configuration 0>
 bLength              9
 bDescriptorType      2
 wTotalLength         25
 bNumInterfaces       1
 bConfigurationValue  1
 iConfiguration       0 ()
 bmAttributes         224 (Self-poweredRemote Wakeup)
 MaxPower             0 mA
  <interface 0>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   0
   bAlternateSetting  0
   bNumEndpoints      1
   bInterfaceClass    9
   bInterfaceSubClass 0
   bInterfaceProtocol 0
   iInterface         0 ()
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x81 (in 0x01)
    bmAttributes      3 (interrupt)
    wMaxPacketSize    2
    bInterval         12 ms
    bRefresh          0
    bSynchAddress     0
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.
done
'



More information about the sane-devel mailing list