June 2002 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sat Jun 1 10:27:45 BST 2002
Ending: Sun Jun 30 18:37:07 BST 2002
Messages: 416

• [sane-devel] Plustek Scanner (again)   Jaeger, Gerhard
• [sane-devel] Mustek backend in 1.0.7 and 1.0.8   James Tappin
  • [sane-devel] Mustek backend in 1.0.7 and 1.0.8   Henning Meier-Geinitz
  • [sane-devel] Mustek backend in 1.0.7 and 1.0.8   Henning Meier-Geinitz
• [sane-devel] Proposal: Definition of the format for backend specification files (.desc)   Henning Meier-Geinitz
• [sane-devel] sane 1.0.8 on OS/2   Paul Floyd
  • [sane-devel] sane 1.0.8 on OS/2   Henning Meier-Geinitz
• [sane-devel] sane 1.0.8 on OS/2 part 2   Paul Floyd
  • [sane-devel] sane 1.0.8 on OS/2 part 2   Henning Meier-Geinitz
• [sane-devel] To: Mailing list admin   Andrei B.
• [sane-devel] Re: Cannon N1240u scanner   Steve Frampton
  • [sane-devel] Epson GT-8200U: "Could not send command to scanner"   Steve Frampton
    • [sane-devel] Re: Epson GT-8200U: "Could not send command to scanner"   Steve Frampton
      • [sane-devel] Re: Epson GT-8200U: "Could not send command to scanner"   Henning Meier-Geinitz
    • [sane-devel] Epson GT-8200U: "Could not send command to scanner"   Karl Heinz Kremer
      • [sane-devel] Epson GT-8200U: "Could not send command to scanner"   Steve Frampton
      • [sane-devel] Epson GT-8200U: "Could not send command to scanner"   Tim Waugh
      • [sane-devel] Epson GT-8200U: "Could not send command to scanner"   Steve Frampton
• [sane-devel] Re: Mustek 600 III EP Plus problems   Jochen Eisinger
  • [sane-devel] Re: Mustek 600 III EP Plus problems   richard hebert
    • [sane-devel] Re: Mustek 600 III EP Plus problems   Gene Heskett
      • [sane-devel] Re: Mustek 600 III EP Plus problems   Jochen Eisinger
    • [sane-devel] Re: Mustek 600 III EP Plus problems   Jim.George
  • [sane-devel] Re: Mustek 600 III EP Plus problems   richard hebert
    • [sane-devel] Re: Mustek 600 III EP Plus problems   Henning Meier-Geinitz
• [sane-devel] RedHat 7.3 + scanimage (no scanners identified)   snowkrash at altavista.nl
  • [sane-devel] RedHat 7.3 + scanimage (no scanners identified)   Tim Waugh
• [sane-devel] Genius HR6X parallel   Mario Alberto Cozzuol
  • [sane-devel] Genius HR6X parallel   Jaeger, Gerhard
• [sane-devel] Problems porting to cygwin   Jim.George
  • [sane-devel] Problems porting to cygwin   Henning Meier-Geinitz
    • [sane-devel] Problems porting to cygwin   Sylvain Petreolle
      • [sane-devel] Problems porting to cygwin   Jim.George
      • [sane-devel] Problems porting to cygwin   Sylvain Petreolle
      • [sane-devel] Problems porting to cygwin   Matthew Duggan
      • [sane-devel] Problems porting to cygwin   Sylvain Petreolle
    • [sane-devel] Problems porting to cygwin   Jim.George
• [sane-devel] Confused !   O-Zone
  • [sane-devel] Confused !   Henning Meier-Geinitz
• [sane-devel] Mustek 600 II CD, don't understand how to configure it correctly   drfazor
  • [sane-devel] Mustek 600 II CD, don't understand how to configure it correctly   Henning Meier-Geinitz
• [sane-devel] not seeing scanner   HogHunter
• [sane-devel] Umax Astra 2000P problem   Tim Johnson
  • [sane-devel] Umax Astra 2000P problem   VOLTZ Stéphane
• [sane-devel] HP 7450 C - ADF   Miroslav Hrad
  • [sane-devel] HP 7450 C - ADF   Rene Rebe
    • [sane-devel] HP 7450 C - ADF   Miroslav Hrad
• [sane-devel] few newbie questions/problems   Grzegorz Jaskiewicz
  • [sane-devel] few newbie questions/problems   steve
    • [sane-devel] few newbie questions/problems   Henning Meier-Geinitz
  • [sane-devel] few newbie questions/problems   Jochen Eisinger
  • [sane-devel] few newbie questions/problems   Henning Meier-Geinitz
• [sane-devel] scanner.c: read_scanner(0): funky result:-75   Erik Riedel
• [sane-devel] film scanner recommendation   Witold Paluszynski
  • [sane-devel] film scanner recommendation   Major A
  • [sane-devel] film scanner recommendation   Ulrich Deiters
    • [sane-devel] film scanner recommendation   Hubert Figuiere
  • [sane-devel] film scanner recommendation   Roland Roberts
    • [sane-devel] film scanner recommendation   Karl Heinz Kremer
      • [sane-devel] film scanner recommendation   Oliver Schwartz
• [sane-devel] color problems on bright areas   John Hunter
  • [sane-devel] color problems on bright areas   Oliver Rauch
• [sane-devel] Microtek Scanmaker 4800   XenoWolf
  • [sane-devel] Microtek Scanmaker 4800   Karsten Festag
  • [sane-devel] Microtek Scanmaker 4800   XenoWolf
    • [sane-devel] Microtek Scanmaker 4800   Karsten Festag
• [sane-devel] Microtek ScanMaker 636 at Advance Hostadapter   Karsten Festag
• [sane-devel] Epson 1650 error in receive - status = 9   Jeff Johnson
  • [sane-devel] Epson 1650 error in receive - status = 9   Jeff Johnson
• [sane-devel] Visioneer Paperport 3100   jTc
• [sane-devel] Solaris 8 and SANE   Kip Iles
  • [sane-devel] Solaris 8 and SANE   Henning Meier-Geinitz
  • [sane-devel] Solaris 8 and SANE   Kip Iles
    • [sane-devel] Solaris 8 and SANE   Henning Meier-Geinitz
• [sane-devel] Scanner Trust Imagery 2400SP   zbzb at netcourrier.com
  • [sane-devel] Scanner Trust Imagery 2400SP   zbzb at netcourrier.com
  • [sane-devel] Scanner Trust Imagery 2400SP   Henning Meier-Geinitz
• [sane-devel] Request for help: automatic image detection   mh
  • [sane-devel] Request for help: automatic image detection   Henning Meier-Geinitz
• [sane-devel] Epson Perfection 1650 USB on Solaris   Kip Iles
  • [sane-devel] Epson Perfection 1650 USB on Solaris   Henning Meier-Geinitz
• [sane-devel] color depth Q:   Jeff Johnson
  • [sane-devel] color depth Q:   Frank Zago
    • [sane-devel] color depth Q:   Jeff Johnson
  • [sane-devel] color depth Q:   Oliver Rauch
• [sane-devel] re: Sane and Solaris 8   Bruce Riddle
• [sane-devel] epson 1250-how to get working?   David Cougle
  • [sane-devel] epson 1250-how to get working?   Henning Meier-Geinitz
  • [sane-devel] epson 1250-how to get working?   David Cougle
    • [sane-devel] epson 1250-how to get working?   Henning Meier-Geinitz
• [sane-devel] meta-backends   Major A
  • [sane-devel] meta-backends   Hubert Figuiere
    • [sane-devel] meta-backends   Major A
      • [sane-devel] meta-backends   Hubert Figuiere
  • [sane-devel] meta-backends   Henning Meier-Geinitz
• [sane-devel] RFC: SANE2 and previews   Major A
  • [sane-devel] RFC: SANE2 and previews   Oliver Rauch
• [sane-devel] java api   blackhol at web.de
  • [sane-devel] java api   Silvio Vogt
    • [sane-devel] java api   Henning Meier-Geinitz
      • [sane-devel] java api   Oliver Schwartz
• [sane-devel] GUI for sane configuration (again...)   stef
  • [sane-devel] GUI for sane configuration (again...)   Henning Meier-Geinitz
• [sane-devel] epson 1250 working, but two questions   David Cougle
  • [sane-devel] epson 1250 working, but two questions   Jaeger, Gerhard
  • [sane-devel] epson 1250 working, but two questions   David Cougle
• [sane-devel] how to get usb scanner to load scanner.o automatically?   David Cougle
  • [sane-devel] how to get usb scanner to load scanner.o automatically?   Bertrik Sikken
  • [sane-devel] how to get usb scanner to load scanner.o automatically?   Marcel Pol
• [sane-devel] support for nikon scantouch ax-1200?   Fabrice
• [sane-devel] Sand on Solaris 9   Bruce Riddle
  • [sane-devel] Sand on Solaris 9   Peter Kirchgessner
  • [sane-devel] Sand on Solaris 9   Henning Meier-Geinitz
• [sane-devel] XSane seg faults (sm3600 at fault)   Decibels
  • [sane-devel] XSane seg faults (sm3600 at fault)   Henning Meier-Geinitz
• [sane-devel] problem with epson driver: noise in scans   Henry House
  • [sane-devel] problem with epson driver: noise in scans   Karl Heinz Kremer
• [sane-devel] Sane-CVS on OS/2   Franz Bakan
  • [sane-devel] Sane-CVS on OS/2   Frank Zago
  • [sane-devel] Sane-CVS on OS/2   Henning Meier-Geinitz
• [sane-devel] Usage of parallel port scanner   Joachim Backes
  • [sane-devel] Usage of parallel port scanner   Sylvain Petreolle
    • [sane-devel] Usage of parallel port scanner   Joachim Backes
  • [sane-devel] Usage of parallel port scanner   Jochen Eisinger
• [sane-devel] re unsusucribe   RON BRICKLE
• [sane-devel] unknown vendor using ls-40 with freebsd   James Beard
  • [sane-devel] unknown vendor using ls-40 with freebsd   Henning Meier-Geinitz
    • [sane-devel] unknown vendor using ls-40 with freebsd   James Beard
• [sane-devel] Re: Sane-devel digest, Vol 1 #440 - 12 msgs   HogHunter
  • [sane-devel] Re: Sane-devel digest, Vol 1 #440 - 12 msgs   Bertrik Sikken
• [sane-devel] Re: Sane-devel digest, Vol 1 #441 - 6 msgs   Rob Ward
  • [sane-devel] Re: Sane-devel digest, Vol 1 #441 - 6 msgs   Henning Meier-Geinitz
• [sane-devel] (no subject)   noriyoshi_sasaki at epkowa.co.jp
• [sane-devel] success report for 'Genius ColorPage-Life Pro' parallel port scanner   VOLTZ Stéphane
• [sane-devel] Epson 1650 on SunFire V100 (64 bit) Solaris 8 with Bolthole's epsonscan driver.   Kip Iles
• [sane-devel] Umax 3400   Carsten Neumann
  • [sane-devel] Umax 3400   Jaeger, Gerhard
    • Error in plustek backend (was: Re: [sane-devel] Umax 3400)   Carsten Neumann
      • Error in plustek backend (was: Re: [sane-devel] Umax 3400)   Carsten Neumann
• [sane-devel] Default path for USB device .conf files   Tim Waugh
  • [sane-devel] Default path for USB device .conf files   Henning Meier-Geinitz
    • [sane-devel] Default path for USB device .conf files   Frank Zago
      • [sane-devel] Default path for USB device .conf files   Henning Meier-Geinitz
  • [sane-devel] Default path for USB device .conf files   Karl Heinz Kremer
• [sane-devel] Plustek U12B   Mathew L. Alexander
  • [sane-devel] Plustek U12B   Jaeger, Gerhard
• [sane-devel] Scanner Epson GT-6000 (SCSI) doesn't work   Thomas Heuving
• [sane-devel] Epson Perfection 1650 - No scanners were identified   Simon O'Rorke
  • [sane-devel] Epson Perfection 1650 - No scanners were identified   Henning Meier-Geinitz
  • [sane-devel] Epson Perfection 1650 - No scanners were identified   Simon O'Rorke
  • [sane-devel] Epson Perfection 1650 - No scanners were identified   Karl Heinz Kremer
• [sane-devel] Trust easy connect 9600   Jan Keirse
• [sane-devel] Trust Easy connect 9600 plus howto   Jan Keirse
  • [sane-devel] Trust Easy connect 9600 plus howto   Henning Meier-Geinitz
    • [sane-devel] Trust Easy connect 9600 plus howto   Jan Keirse
      • [sane-devel] Trust Easy connect 9600 plus howto   Henning Meier-Geinitz
• [sane-devel] frame alignment with nikon ls-40 (coolscan2) strip feeder   James Beard
• [sane-devel] Epson 1650 on Solaris 8   Kip Iles
  • [sane-devel] Epson 1650 on Solaris 8   Henning Meier-Geinitz
• [sane-devel] Support for scanning directories in sane-find-scanner   Henning Meier-Geinitz
• [sane-devel] sane-1.0.8 & Plustek UT24   Andrey Bushov
  • [sane-devel] sane-1.0.8 & Plustek UT24   Jaeger, Gerhard
• [sane-devel] scanimage problem / sane 1.0.8 / Epson / Solaris 8 (x86)   Ed Randall
  • [sane-devel] scanimage problem / sane 1.0.8 / Epson / Solaris 8 (x86)   Henning Meier-Geinitz
  • [sane-devel] scanimage problem / sane 1.0.8 / Epson / Solaris 8 (x86)   Ed Randall
    • [sane-devel] scanimage problem / sane 1.0.8 / Epson / Solaris 8 (x86)   Henning Meier-Geinitz
    • [sane-devel] scanimage problem / sane 1.0.8 / Epson / Solaris 8 (x86)   Ed Randall
  • [sane-devel] scanimage problem / sane 1.0.8 / Epson / Solaris 8 (x86)   Kip Iles
• [sane-devel] [NEWBIE] find-scanner OK, but scanimage NOT;   Florian Konnertz
  • [sane-devel] [NEWBIE] find-scanner OK, but scanimage NOT;   Oliver Schwartz
• [sane-devel] Problems with HP OfficeJet D145   Christian Folini
• [sane-devel] Any updates on Sane and BusLogic cards on 2.4.x kernels?   Gary Garrard
  • [sane-devel] Any updates on Sane and BusLogic cards on 2.4.x kernels?   V K
  • [sane-devel] Any updates on Sane and BusLogic cards on 2.4.x kernels?   Ray Curtis
• [sane-devel] difficulty with jp scanjet 3300c (usb)   ---(rick moranis)---
• [sane-devel] How can I check for libieee1284 present?   Max Vorobiev
  • [sane-devel] How can I check for libieee1284 present?   Matthew Duggan
  • [sane-devel] How can I check for libieee1284 present?   Henning Meier-Geinitz
• [sane-devel] Changes required to build on Solaris 8 x86   Ed Randall
  • [sane-devel] Changes required to build on Solaris 8 x86   Henning Meier-Geinitz
• [sane-devel] remove me from the list   Jowwwjoh at aol.com
  • [sane-devel] remove me from the list   Sylvain Petreolle
    • [sane-devel] remove me from the list   Frank Zago
• [sane-devel] 1.0.8/N640P   Ian Stirling
  • [sane-devel] 1.0.8/N640P   Henning Meier-Geinitz
    • [sane-devel] 1.0.8/N640P   Ian Stirling
• [sane-devel] [Suggestion/Patch] Add the filename counter feature to the Viewer mode of Xsane.   Peter Seiderer
• [sane-devel] SANE 1.0.5 -> 1.0.8 *help*! (long)   Journeyman
  • [sane-devel] SANE 1.0.5 -> 1.0.8 *help*! (long)   Henning Meier-Geinitz
    • [sane-devel] SANE 1.0.5 -> 1.0.8 *help*! (long)   Journeyman
      • [sane-devel] SANE 1.0.5 -> 1.0.8 *help*! (long)   Henning Meier-Geinitz
      • [sane-devel] SANE 1.0.5 -> 1.0.8 *help*! (long)   Journeyman
      • [sane-devel] SANE 1.0.5 -> 1.0.8 *help*! (long)   Henning Meier-Geinitz
    • [sane-devel] SANE 1.0.5 -> 1.0.8 *help*! (long)   Journeyman
• [sane-devel] ppdev bug?   Tim Waugh
  • [sane-devel] ppdev bug?   Matthew Duggan
    • [sane-devel] ppdev bug?   Tim Waugh
• [sane-devel] iscan vs rh7.3, won't even configure!   Gene Heskett
• [sane-devel] seg fault's   ---(rick moranis)---
  • [sane-devel] seg fault's   Henning Meier-Geinitz
  • [sane-devel] seg fault's   Bertrik Sikken
• [sane-devel] iscan--1.3.0 vs rh7.3   Gene Heskett
• [sane-devel] platform independent sanei_usb control messages   Bertrik Sikken
  • [sane-devel] platform independent sanei_usb control messages   Henning Meier-Geinitz
• [sane-devel] Speed of the HP driver using USB interface...   Sunil William Savkar
  • [sane-devel] Speed of the HP driver using USB interface...   Tom Williams
  • [sane-devel] Speed of the HP driver using USB interface...   Bertrik Sikken
• [sane-devel] Success but I don't what I did...   Gene Heskett

Last message date: Sun Jun 30 18:37:07 BST 2002
Archived on: Sat Dec 3 12:18:11 GMT 2022

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...