November 2014 Archives by thread
Starting: Sat Nov 1 11:12:22 UTC 2014
Ending: Sat Nov 29 22:01:38 UTC 2014
Messages: 90
- [Nut-upsuser] nutdrv_atcl_usb
Charles Lepple
- [Nut-upsuser] OpenUPS2 support in the HID driver?
Charles Lepple
- [Nut-upsuser] blazer_usb disconnects
Anders Herbjørnsen
- [Nut-upsuser] Master Works, Slave Does Not
Steve Read
- [Nut-upsuser] Master Works, Slave Does Not
Charles Lepple
- [Nut-upsuser] Master Works, Slave Does Not
Stan Gammons
- [Nut-upsuser] Master Works, Slave Does Not
Charles Lepple
- [Nut-upsuser] Master Works, Slave Does Not
Steve Read
- [Nut-upsuser] Master Works, Slave Does Not
Charles Lepple
- [Nut-upsuser] Master Works, Slave Does Not
Steve Read
- [Nut-upsuser] Master Works, Slave Does Not
Steve Read
- [Nut-upsuser] Master Works, Slave Does Not
Charles Lepple
- [Nut-upsuser] Master Works, Slave Does Not
Steve Read
- [Nut-upsuser] Master Works, Slave Does Not
Charles Lepple
- [Nut-upsuser] Master Works, Slave Does Not
Steve Read
- [Nut-upsuser] Master Works, Slave Does Not
Charles Lepple
- [Nut-upsuser] Master Works, Slave Does Not
Steve Read
- [Nut-upsuser] Master Works, Slave Does Not
Stan Gammons
- [Nut-upsuser] Master Works, Slave Does Not
Stan Gammons
- [Nut-upsuser] Emerson/Liebert GXT3
Marcelo Fernandez
- [Nut-upsuser] APC Smart-UPS C1500 connected by usb
Selva Nair
- [Nut-upsuser] Eaton-9130 (usbhid-ups) no battery.voltage parameter!
Валерий Линчевский
- [Nut-upsuser] Emne: Re: Eaton-9130 (usbhid-ups) no battery.voltageparameter!
Alf Høgemark
- [Nut-upsuser] usbhid-ups doesn't work after kernel/libs update
Andrew
- [Nut-upsuser] Still trying to make nut work, failing miserably
Gene Heskett
- [Nut-upsuser] upsonic IRT1000 on ubuntu 14.04lts
Klint Gore
- [Nut-upsuser] Belkin UPS, master netbook, slave MythTV server
Greg Vickers
- [Nut-upsuser] usbhid-ups must use '-u root'
Greg Vickers
- [Nut-upsuser] Tripp-Lite USB constantlly disconnecting.
Shade Alabsa
- [Nut-upsuser] usbhid-ups causes hang/crash in ohci driver
Kristian Rasmussen
- [Nut-upsuser] "Communications with UPS advice at localhost lost" when using an other USB device
Victor Porton
- [Nut-upsuser] Do I need to configure times and percents?
Victor Porton
- [Nut-upsuser] New UPS, upsdrvctl report
Bill Ezell
- [Nut-upsuser] nut and Tripp Lite smart500rt1u on Scientific Linux 7
Matthew Sund
Last message date:
Sat Nov 29 22:01:38 UTC 2014
Archived on: Sat Nov 29 22:02:09 UTC 2014
This archive was generated by
Pipermail 0.09 (Mailman edition).