October 2002 Archives by thread
Starting: Tue Oct 1 00:21:57 BST 2002
Ending: Thu Oct 31 20:15:09 GMT 2002
Messages: 1302
- [sane-devel] Epson 1650 out of memory
Karl Heinz Kremer
- [sane-devel] Umax Ultraslim 1220
David Lerner
- [sane-devel] Compiling problem 1.0.9pre1
luca filigheddu
- [sane-devel] Proposal for device lists
Henning Meier-Geinitz
- [sane-devel] device not recognised
SteveC
- [sane-devel] Proposal: SANE standard addition
Henning Meier-Geinitz
- [sane-devel] Re: Compiling CVS, problems with po files: multiple definitions umax_pp
Franz Bakan
- [sane-devel] Can't activate transparency unit on Epson Perfection 2450
Graham Hughes
- [sane-devel] Epson Perfection 1660 photo -> Driver(s)
John Williams
- [sane-devel] USB scanners page.
Jonathan Buzzard
- [sane-devel] HP5370c and sane
luca filigheddu
- [sane-devel] Epson MF device: CX 3200
Till Kamppeter
- [sane-devel] where to put firmware files?
Henning Meier-Geinitz
- [sane-devel] Epson Perfection 1260 problem
E V
- [sane-devel] HP Scanjet 5100c
Al Mos
- [sane-devel] New Epson Scanners
Till Kamppeter
- [sane-devel] Permission denied on parallel port Epson Expression636
Petr Hlustik
- [sane-devel] Several comments on Canon N670U support
kilgota at khayyam.math.auburn.edu
- [sane-devel] (patch) Small fixes for canon630u, coolscan and microtek2
Petter Reinholdtsen
- [sane-devel] LT 9452 works only after replugging
Bjoern Franke
- [sane-devel] yet another 5400c sucker
Joacim Persson
- [sane-devel] Proposal: SANE standard additions/fixes
Henning Meier-Geinitz
- [sane-devel] cvs.hungry.com down?
Henning Meier-Geinitz
- [sane-devel] SANE 1.0.8, Canoscan 300 on Adaptec AVA-1502p ISA SCSI -> scanimage segfaults
Till Kamppeter
- [sane-devel] longing for iscan
Jussi-Pekka Sairanen
- [sane-devel] SANE 1.0.8, Canoscan
Deiters
- [sane-devel] Genius ColorPage HR6 V2 Parallel Port
Adelson Santos de Oliveira
- [sane-devel] SANE 1.0,8, Canoscan
Deiters
- [sane-devel] discussion board
Karsten Strunk
- [sane-devel] SANE network port assigned by IANA
Henning Meier-Geinitz
- [sane-devel] SANE 1.0.8, Canoscan 300 on Adaptec AVA-1502p ISA SCSI -> scani
Henning Meier-Geinitz
- [sane-devel] driver search engine
Jochen Eisinger
- [sane-devel] double msgid in po files
Henning Meier-Geinitz
- [sane-devel] Compilation question
Sylvain Petreolle
- [sane-devel] aha152x with mustek scanner and SANE
Mike Nix
- [sane-devel] Using VMWare to create backend for Visioneer 6200
Michael G. Manry
- [sane-devel] XSANE 0.88 - Windows and Linux (Netork)
Christoph Knauer
- [sane-devel] HP Scanjet 2100c - trying to get started
Steven King
- [sane-devel] How to log transferred scsi data?
Karsten Festag
- [sane-devel] ADF Epson Expression 1640XL problems
Alexandre E. Averianov
- [sane-devel] Version 0.44-5
Jaeger, Gerhard
- [sane-devel] dc240 only works with GCC
Petter Reinholdtsen
- [sane-devel] CVS down again???
Jaeger, Gerhard
- [sane-devel] pb with xsane
f.collineau
- [sane-devel] xsane as normal user
Riccardo Ferraro
- [sane-devel] Any success with USB on OS X?
Karl Heinz Kremer
- [sane-devel] HP 3400c (was: support scanner)
Henning Meier-Geinitz
- [sane-devel] SANE 1.0.9 release date
Oliver Schwartz
- [sane-devel] Re: Sane-devel digest, Vol 1 #73 - 4 msgs
Autoresponder
- [sane-devel] Re: [Future] [Fwd: The bug of Canon-backends of SANE with Canocsan300 by ISA SCSI]
Till Kamppeter
- [sane-devel] Re: Sane-devel digest, Vol 1 #74 - 4 msgs
Autoresponder
- [sane-devel] Code freeze delayed
Henning Meier-Geinitz
- [sane-devel] hp scanjet 5100c parport scanner
Al Mos
- [sane-devel] v4l and digicams
Bob Lockie
- [sane-devel] Code freeze on 2002-10-17
Henning Meier-Geinitz
- [sane-devel] Re: Sane-devel digest, Vol 1 #75 - 15 msgs
Autoresponder
- [sane-devel] BUG in xscanimage in CVS
Oliver Rauch
- [sane-devel] Re: Sane-devel digest, Vol 1 #76 - 1 msg
Autoresponder
- [sane-devel] wrong assumption on char signedness
Aurelien Jarno
- [sane-devel] CVS gmake.exe[1]: *** [plustek.de.mo] Error 1
Franz Bakan
- [sane-devel] Build Errors On FreeBSD 4.6 - For Plustek Backend
Ryan Budge
- [sane-devel] Re: Sane-devel digest, Vol 1 #77 - 9 msgs
Autoresponder
- [sane-devel] Epson 1660 in SuSE 8.1
wolfi
- [sane-devel] Epson 1650: set_scan_area failed: Invalid argument
Pierre Sarrazin
- [sane-devel] Re: Sane-devel digest, Vol 1 #78 - 14 msgs
Autoresponder
- [sane-devel] The Epson 1660 setup on SuSE 8.1 ... hope it might be helpful for others:-)
wolfi
- [sane-devel] Re: Sane-devel digest, Vol 1 #79 - 3 msgs
Autoresponder
- [sane-devel] "Tollyboy Products"
Matto Marjanovic
- [sane-devel] AGFA Spanscan E50 USB
Bob Lockie
- [sane-devel] xsane
Bob Lockie
- [sane-devel] sane gphoto2
Bob Lockie
- [sane-devel] gphoto2 backend
Bob Lockie
- [sane-devel] Re: Sane-devel digest, Vol 1 #80 - 17 msgs
Autoresponder
- [sane-devel] v4l
Bob Lockie
- [sane-devel] Re: Shading problem on HP2100C and Negative scanning on EPSON
Till Kamppeter
- [sane-devel] Re: Sane-devel digest, Vol 1 #81 - 16 msgs
Autoresponder
- [sane-devel] UMax 2000P failures on Debian Woody
Hanasaki JiJi
- [sane-devel] SCSI Scanner attached to USB Port via Microtech
Mark Bucciarelli
- [sane-devel] Patch to show existense of hpoj backend.
Jarl Friis
- [sane-devel] HP Scanjet 5490 (c)
Alexander Biedermann
- [sane-devel] can't get linoscan 1400 to work
Benedikt Brors
- [sane-devel] [BUG] xcanimage: some buttons have to be disabled while scanning
Aurelien Jarno
- [sane-devel] Re: [hpoj-devel] Patch to show existense of hpoj backend.
David Paschal
- [sane-devel] "device busy" CanoScanfb636u
Bernd Herholtz
- [sane-devel] PRIMAX Jewle 4800
Michael Höller
- [sane-devel] Code freeze for SANE 1.0.9
Henning Meier-Geinitz
- [sane-devel] Code-freeze for sane-1.0.9 active
Oliver Rauch
- [sane-devel] 44-10 vs epson 1250
Gene Heskett
- [sane-devel] HP 5470c logs
SteveC
- [sane-devel] [Info]Trust Easy Webscan 19200
Michael Herder
- [sane-devel] Gamma tables causes distorsions : bug fixed ???
Aurelien Jarno
- [sane-devel] don't get 1.0.9 compiled ..
Michael Höller
- [sane-devel] Scanner ARTEC e+
antoine
- [sane-devel] please help 2940UW and Scanjet 4c
yeagedl
- [sane-devel] EPSON KOWA's Image Scan! Software is avalable again
Karl Heinz Kremer
- [sane-devel] possible sane problem, not sure
Gene Heskett
- [sane-devel] Damn (DEC cc)
Major A
- [sane-devel] hp scanjet 3500 c
Andrea Gedda
- [sane-devel] HP 3400C
Tiikuli
- [sane-devel] XSane/Epson problems and comments
Juhana Sadeharju
- [sane-devel] Scanners
reynolg1
- [sane-devel] canon n670u scan quality
John M Flinchbaugh
- [sane-devel] Blank Page with Cybercom 9352 parallel port
Michael Gruner
- [sane-devel] Re: Do any sane versions fix the Epson backend bug?
Franz Bakan
- [sane-devel] why my gimp can not work with xscanimage pluging in ?
zhu
- [sane-devel] frontends and GIMP
Major A
- [sane-devel] No Sane Device Found
gluntian at lexmark.com
- [sane-devel] Fwd: I killed my Epson perfection 1260 photo. Twice.
Jaeger, Gerhard
- [sane-devel] Artec USB scanner information
Henning Meier-Geinitz
- [sane-devel] "Multi-function" printers and scanners
Theodore Kilgore
- [sane-devel] Help with ppdev /dev/parport0 on Mandrake Linux 9
Mark
- [sane-devel] Epson Perfection 2450 Photo
Karl Bellve
- [sane-devel] xsane-0.89 source and win32-version released
Oliver Rauch
- [sane-devel] USB kernel scanner driver
Henning Meier-Geinitz
- [sane-devel] data noise when scanning wide areas
Brett (Mare) Henley
- [sane-devel] USB scanner and mounting usbdevfs with devmode 0666
Michael Herder
- [sane-devel] Packaging for release in progress
Henning Meier-Geinitz
- [sane-devel] SANE-1.0.9 released
Oliver Rauch
- [sane-devel] gt68xx backend ready for inclusion
Henning Meier-Geinitz
- [sane-devel] Canon_pp errors with Sane 1.0.9
Emil Soleyman-Zomalan
- [sane-devel] Garbage after device names?
Diego Zuccato
- [sane-devel] epson scanner driving me crazy
Emilio Fesocchi
- [sane-devel] Installation of Epson 1650 Scanner
John S. Dey
- [sane-devel] DBG macros and xscanimage
Johann Philipp
- [sane-devel] HP 3570c scanner?
Scott Lipcon
- [sane-devel] driver search for Logitech ScanMan Color 2000
Emmanuel Coulon
- [sane-devel] Umax Astra 1220s
Glenn Barry
- [sane-devel] Scannning trouble with HP 2520A
Brett (Mare) Henley
- [sane-devel] IO-error in sane/Xsane using IDE over SCSI
Katja und Siegfried Haas
- [sane-devel] smp usb and hp office jet g85 not a good combination
Brent Hasty
- [sane-devel] Lexmark X83
Dave Close
- [sane-devel] Re: [hpoj-devel] smp usb and hp office jet g85 not a good combination
David Paschal
- [sane-devel] losing hair and sleep over this
noah
- Fw: Re: [sane-devel] losing hair and sleep over this
noah
- [sane-devel] mac osx
John Doe
- [sane-devel] SCSI problems with a DMC
Andrew Kuchling
- [sane-devel] hp5370 problem
Stefan Kornhuber
- [sane-devel] [ANN] Viceo 0.6 driver release for SANE 1.0.9
Steven Ellis
- [sane-devel] hp4200c backend
Frank Zago
- [sane-devel] Best Java programming API library available
sony antony
- [sane-devel] MD9890 - mustek_pp
Michael Schoelzel
- [sane-devel] MD9890 / mustek_pp
Michael Schoelzel
- [sane-devel] Scanner Genius HR7X Slim USB
Rodrigo Gruppelli
- [sane-devel] Help compiling with gimp support (xsane)
Mark
- [sane-devel] Scanner Daemon ??
Nick Lindsell
- [sane-devel] Please Help
Ashley Scherger
- [sane-devel] Re: Sane-devel digest, Vol 1 #107 - 8 msgs
Glenn Barry
- [sane-devel] canon fb1210u usb film scanner
Ashley Scherger
- [sane-devel] Umax Astra 2200(U? SU?)
kw426 at earthlink.net
- [sane-devel] linux-graphics-dev
Juhana Sadeharju
Last message date:
Thu Oct 31 20:15:09 GMT 2002
Archived on: Sat Dec 3 12:18:12 GMT 2022
This archive was generated by
Pipermail 0.09 (Mailman edition).